Qazqa 96670 Emado Sl 3 Burner Steel With Wood Industrial Spotlight Instruction Manual

Product Information

Product Name: Emado SL 3 Burned Steel with Wood
96670

Overall Size: 440mm x 175mm

Product Specifications:

• Maximum Wattage: 3x 25W
• IP Rating: IP20 (Suitable for indoor use only, where direct
  contact with water is impossible)

Safety Instructions:

1. The luminaires may only be installed by authorized and
   qualified technicians according to the valid regulations for
   electrical installation.
2. Maintenance of the luminaires is limited to their surfaces.
   During maintenance, no moisture should come into contact with any
   areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset,
   preferably by means of a switch in the distribution box, before any
   installation, maintenance, or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. Take into account the minimal separation distance from other
   objects and the required room around the fitting.
6. If in doubt, consult a professional, considering local
   installation requirements. Some countries stipulate that lighting
   may be installed only by registered installers.
7. Clamping screws in electrical connections must be adequately
   tightened, especially in the case of 12V low voltage
   conductors.
8. Clean with a clean, dry cloth or brush, using no solvents or
   abrasives. Avoid dampness on all electrical components.
9. Take into account all available technical information.
10. Dispose of the luminaire in an appropriate electrical waste
    staging area; do not dispose of it with normal domestic waste in a
    standard rubbish can.

Meaning of Symbols:

• For indoor use only, where direct contact with water is
  impossible
• IPXX: Indicates the level of water-proof and dust-proof
• Protection Class I: The fitting must be earthed
• Protection Class II: The fitting is double insulated and does
  not require earthing
• Protection Class III: The fitting is low voltage
• 0.5m: Minimum distance from lighted objects (in meters)
• The type of lamp and maximum size and wattage indicated in each
  lighting unit must not be exceeded; different items require
  different kinds of light sources with different bulb icons
• 220-240V~: The armature is designed to work only with the
  indicated voltage. Different items require different working
  voltages.
• The luminaire can be used in combination with a dimmer.
• The luminaire can be dimmed by a wall switch.

Wire Connection Symbols:

FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands

www.qazqa.nl

Product Usage Instructions

1. Before installing or using the product, carefully study the
   instruction manual and the provided information.
2. Ensure that the product is installed by authorized and
   qualified technicians who adhere to the valid regulations for
   electrical installation.
3. Maintenance should be limited to the surfaces of the
   luminaires. Avoid any moisture coming into contact with terminal
   connections or voltage control parts during maintenance.
4. Prior to any installation, maintenance, or repair work, switch
   off the electrical supply, preferably using a switch in the
   distribution box.
5. Avoid installing exterior lighting during rain.
6. Take into account the minimal separation distance from other
   objects and the required room around the fitting.
7. If you are unsure, consult a professional, considering local
   installation requirements. Some countries may require lighting to
   be installed only by registered installers.
8. Ensure clamping screws in electrical connections are adequately
   tightened, especially for 12V low voltage conductors.
9. Clean the product with a clean, dry cloth or brush. Do not use
   solvents or abrasives. Avoid dampness on all electrical
   components.
10. Consider all available technical information related to the
    product.
11. Dispose of the luminaire in an appropriate electrical waste
    staging area. Do not dispose of it with normal domestic waste in a
    standard rubbish can.