Snoozeband Wireless Sleep Headphones
Wireless Sleep Headphones User Manual
Precautions
- DO NOT expose the product to liquids or moisture
- DO NOT attempt to tamper with the product by dropping,disassembling, opening or scratching etc.
- DO NOT store the product near acidic or alkaline material
- Take out the headphones before washing
- Keep the product away from fire
- Note: when not used for 3-6 months, charge once.
Features
- Built-in microphone and wireless speakers
- Headphones are removable for washing
- Rechargeable through universal micro USB cable
Specifications
- Wireless version: V5.0
- Frequency: 2.402 GHz – 2.480 GHz
- Transmission range: 10m/33Ft
- Rated power: RMS 10mW x 2
- Speaker unit: 32 /30mm
- Battery: 3.7V 180mAh rechargeable Li-polymer battery
- Standby time: over 120 hours
- Play time: over 12 hours
- Charge time: 2 hours
Washing the SnoozeBand
- Carefully remove both ends of the speaker module usingthe opening inside the SnoozeBand
- Hand wash with cold water and air-dry
- Reinstall the wireless speaker module back to its originallocation. Make sure the buttons are aligned with thecontrol panel.
Turning On/Off
- Press and hold for 3 seconds
Pairing with your device
- Turn on Bluetooth
- Turn on the SnoozeBand
- Connect to BT-Music on your device
Charging
- USB charging port
- Plug the USB cable into a USBcharging port or laptop. It will takeabout 1 hour to fully charge.
