- The air inlet may be blocked
- Machine should be at least a foot away from walls or furniture (air should be allowed to circulate freely)
- Turn machine off and unplug
- Remove the bottom cover – twist clockwise to unlock
- If the filter is in the plastic protective wrap, remove plastic and reinstall
- Twist bottom cover counter clockwise to lock into place
- Plug in & turn on
- The power button will always be illuminated when the machine is plugged in
- If only the power button is illuminated, the machine is turned off
- Push power button to turn on – all lights will be lit up (defaults to Low when 1st turned on)
- Push Fan Speed button once to select High
- Place hand over the top of the machine, check for air flow
- If there is air flow, the machine is in night mode (Display lights are not visible)
- If there is no air flow (fan is not turning) but the lights are on
- Turn machine off and unplug
- Plug machine back in and turn on
- If all lights are on, no airflow (fan not turning) please Contact Us
- Place hand over the top of the machine, check for air flow
- Push Fan Speed button once to select High
