M1210P MPPT Solar Charge Controller
Product Information:
The M1210P is a MPPT solar charge controller designed to work
with GEL, AGM, and LiFePO4 batteries. The controller has an LCD
display that shows battery voltage, charge current, device
temperature, and error codes. It also has LED indicators that show
the battery state of charge and voltage. The controller can handle
up to 10A of charging current and has various protection features
such as over-discharge protection, over-voltage protection, device
over-heating protection, PV over-voltage protection, and reverse
polarity protection.
Product Usage:
Installation: The M1210P controller can only be
installed indoors. Connect the negative and positive terminals of
the battery to the corresponding negative and positive terminals of
the controller. The wire dimensions for accessories are
L=130mm-+10mm and for the controller is L=120m-m+10mm.
LCD Display Indication: The LCD display has
three menus that show the battery voltage and charge current,
device temperature, and error codes. Use the function key to switch
between the menus. Long press the function key to enter the set
mode and short press to switch between the screen pages.
Error Code: The controller has various error
codes that indicate different issues. The error codes are E00 (No
Error), E01 (Over-Discharge Battery), E02 (Over Voltage Device),
E06 (Over Heating PV), E10 (Over Voltage Solar), E13 (Reverse
Polarity Solar), and E14 (Reverse Polarity Battery).
LED Display Indication: The LED indicators show
the battery state of charge (SOC) and voltage. The SOC is indicated
by four LEDs with 25%, 50%, 75%, and 100% levels. The battery
voltage is indicated by four LEDs with levels of 11.6V, 12.1V,
12.6V, and 13.2V. The LED flashes when the battery is in float mode
and is steady on when the battery is fully charged.
Reminder: Always follow the safety precautions
and guidelines provided in the user manual while using the M1210P
controller.
GEL
AGM LiFePO4
MPPT Solar Charge Controller
M1210P
User Manual
GEL AGM LiFePO4 GEL AGM LiFePO4
GEL/AGM/LiFePO4
Main Feature
· 10A MPPT solar charge controller with portable design. · 3-stage charging optimizes battery performance. · Suitable for battery types such as vented GELAGM and LiFePO4 . · LCD shows Battery Voltage and Charge Current,etc . · LED inducts Battery SocCharging Sta and Battery type. · User-friendly key press operation, more simple and easier. · Easy to be mounted. · OverchargeOver-temperatureReverse Polarity Protection.
Warning and Caution
· Designed for 12V batteries, do not connect to higher voltage batteries. · The PV Voc cannot exceed 35V · Use within rated power and voltage range · Avoid placing solar panels in partially sunny or shaded environments · Keep controller away from water · Keep controller in an environmental temperature from – 20ºC~+55ºC. Avoid direct sunlight. · Keep good heat dissipation.
Product Dimension
96.4mm
GEL
AGM LLiiFFeePPOO4
Installation
GEL AGM LiFePO4
Negative
Positive
27mm 61.6mm
Positive
Negative
Reminder: The controllers can be installed indoor only.
Wire Dimension
1) Accessories L=130mm-+10mm
2) Controller
L=120m-m+10mm
LCD Display Indication
Menu 1: BAT Volt & Charge Curr
Menu 2: Device Temp
Menu 3: ERROR
Key Operation
Function Key System Mode Operation Operation Indication
(LCD only)
Long Press Enter Set Mode Short Press Screen Page Switch
Set Mode
Long Press
(Battery LED only) Short Press
Exit Set Mode And Save Edit Battery Type
Error Code
Code E00 E01 E02 E06 E10 E13 E14
Error
No Error Over-Discharge Battery Over Voltage Device Over Heating PV Over Voltage Solar Reverse Polarity Battery Reverse Polarity
LED Display Indication
1) Battery SOC Indication
LED 1 LED 2 LED 3 LED 4
SOC 25% 50% 75% 100% Bat Volt 11.6V 12.1V 12.6V 13.2V
Float Fashing
Steady On
SOC <25 <50 <75 >75
Charging State
LED1
Charging
Idle Charging
Idle
Charging
Idle Charging
Idle
LED2 LED3 LED4
2) Battery Type Indication
System mode View Mode Set Mode
Describe The current battery
type is selected
Abbreviations GEL AGM
LiFePO4
Battery Types GEL Battery AGM Battery
Lithium iron phosphate battery
GEL AGM LiFePO4
Equalize Charge Voltage (7 days cycle)
Boost Charge Volt.
Float Charge Volt.
GEL AGM LiFePO4 GEL AGM LiFePO4 GEL AGM LiFePO4
14.6V
14.2V 14.4V 14.4V 13.8V 13.8V
–
Parameter No-load Loss Max Solar Input Voltage Rated Solar Charge Current Max Solar Input Power Operating Temperature IP Protection Net Weight Operating Altitude Controller Dimension(mm)
Value 12mA <30Voc 10A 150W -35ºC~+45ºC IP45 110g 3000 meters 96.4*61.6*27
