Panduit Ucuc2-v316 Uniclip U Channel Type Bracket Instruction Manual

UCUC2-V316 Uniclip U Channel Type Bracket

Product Information:

Product Usage Instructions:

Installation Instructions – Strut Type:

1. Prepare the following brackets: UCSQ1-V316, UCSQ1-VC,
   UCSQ2-V316, UCSQ2-VC.
2. Follow the diagram provided in the manual for the specific
   installation steps.

Installation Instructions – Top Hat:

1. Prepare the following brackets: UCTH1-V316, UCTH1-VC.
2. Refer to the measurements mentioned in the manual for bracket
   installation.
3. Follow the diagram provided in the manual for the specific
   installation steps.

Installation Instructions – Round Rung:

1. Prepare the following brackets: UCRND1-V316, UCRND1-VC.
2. Follow the diagram provided in the manual for the specific
   installation steps.

Installation Instructions – I-Beam:

1. For UCIB1, follow the recommended tightening torque of 25
   lbs-in [2.8 N.m] for each nut.
2. For UCIB2, follow the diagram provided in the manual for the
   specific installation steps.

Cushion Sleeve and Tie Strap Installation:

1. Wrap the cushion sleeve around the cabling.
2. Install the tie strap over the cushion sleeve and cabling,
   securing it around the bracket.

For technical support and further instructions, please visit
www.panduit.com/resources/install_maintain.asp.

Contact email: [email protected]

Fax: 866-405-6654

© Panduit Corp. 2014

METAL UNICLIP BRACKETS FOR USE WITH STRUT, TOP HAT, I-BEAM & ROUND LADDER RUNG SYSTEMS
Part Number(s): UCSQ1-V316, UCSQ1-VC, UCSQ2-V316, UCSQ2-VC, UCTH1-V316, UCTH1-VC, UCIB1-V316, UCIB1-VC, UCIB2-V316, UCIB2-VC, UCRND1-V316 & UCRND1-VC

INSTALLATION INSTRUCTIONS
STRUT -TYPE

RW309 (02/2021)

2 1

UCSQ1-V316, UCSQ1-VC UCSQ2-V316, UCSQ2-VC
4

3

5

UCTH1-V316, UCTH1-VC 1

TOP HAT
“X” 2.27″-2.60″ [57.7-66mm] 1.91″-2.26″ [48.5-57mm] 1.50″-1.90″ [38-48mm]

75 lbs-in [8.5 N.m]

2 3

4

5

75 lbs-in [8.5 N.m] For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 2

© Panduit Corp. 2014

INSTALLATION INSTRUCTIONS

ROUND RUNG

1

2

1″ Round

RW309 (02/2021) 3

UCRND1-V316,UCRND1-VC

UCIB1-V316, UCIB1-VC UCIB2-V316, UCIB2-VC
3

I-BEAM
For UCIB1 1
For UCIB2
4

Recommended Tightening 25 lbs-in [2.8 N.m] each nut
2
5

Typical installation of the cushion sleeve and tie strap: 1. Wrap cushion sleeve around cabling 2. Install tie strap over the cushion sleeve/cabling and around the bracket

75 lbs-in [8.5 N.m] Tie Strap Cushion Sleeve

2 1

For Instructions in Local Languages and Technical Support:
www.panduit.com/resources/install_maintain.asp

www.panduit.com Page 2 of 2

E-mail: [email protected]
Fax: 866-405-6654

References

• Panduit | Network Infrastructure and Industrial Electrical Wiring