Remove all protective materials from the product.
Press the power button to turn on the product. (Caution: Do
not touch the flat white cable or the ink tubes and their
translucent cover.)

Choose a Setup Method

To use your mobile device for setup:

Download the Epson Smart Panel app from your device’s app
store. Do not launch the app yet.
Launch the app and follow its instructions to set up your
product.

If you do not want to use a mobile device for
setup:

Skip to the Fill ink tanks section below.

Fill Ink Tanks

Warning: Keep the ink bottles out of the reach
of children and do not drink the ink.

With the scanner unit raised, open the ink tank cover, then
open the cap for the black (BK) ink tank. (Note: Refer to the
color-coded sticker to identify the color of each tank.)
Unpack the black (BK) ink bottle. Hold the ink bottle upright
and slowly turn the bottle cap to remove it. (Caution: Do not
shake or squeeze the ink bottle. Do not touch the top of the ink
bottle after its cap is removed.)
Insert the ink bottle into the filling port. (Note: Do not
force the bottle into position; each bottle is keyed for each
color.)
Wait for the ink to fill the tank. Do not squeeze the bottle or
allow it to contact any other surface. (Note: Ink flows into
the tank and stops automatically when the ink tank is filled to the
upper line. If ink does not flow from the bottle, lift and reinsert
the bottle.)
When the ink tank is full, remove the ink bottle and securely
close it with the bottle cap. If any ink remains in the bottle,
close the bottle and store it for later use. (Note: If an error
code appears, turn off the product and check that no protective
material has been left inside the product.)

Connecting Power

Connect the power cord to the back of the product and to an
electrical outlet. (Caution: Do not connect to your computer
yet.)

Using the App for Setup (Optional)

If you want to use your mobile device for setup, download the
Epson Smart Panel app from your device’s app store. Do not launch
the app yet.
Launch the app and follow its instructions to set up your
product.

Additional Information

For information on connecting your product to a computer, using
voice-activated printing, or solving problems, refer to the
sections on the back of this sheet.
For details on reaching Epson support, refer to the online
User’s Guide.

Product Language Selection

Select your language. (Note: You can change this setting
later using the product’s control panel. For more information, see
the online User’s Guide.)

Setup Without the App

When an Epson Smart Panel message appears on the LCD screen,
select the option to continue setup without the app.
When the message to see the Start Here sheet appears on the LCD
screen, press and hold the help button for 5 seconds.
Follow the on-screen instructions to start ink charging.

View Fullscreen

ET-3843
Start Here
IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User’s Guide.
1 Unpack

2 Choose a setup method
The Epson Smart Panel® app can help you set up your printer through an interactive, step-by-step process using your smartphone or tablet.

To use your mobile device for setup, continue to step 1.

If you do not want to use a mobile device for setup, skip to the “Fill ink tanks” section below.

1 Download the Epson Smart Panel app
from your device’s app store. Do not launch the app yet.

Note: Do not open the ink bottles until you are ready to fill the ink tanks. The ink bottles are vacuum packed to maintain reliability.
1 Remove all protective materials from the product.

2 Press the power button to turn on the product.

Caution: Do not touch the flat white cable or the ink tubes and their translucent cover.
2 Connect the power cord to the back of the product and to
an electrical outlet.
Caution: Do not connect to your computer yet.

Note: Do not connect your product to your computer yet.
3 Launch the app and follow its instructions to set up your
product. If necessary, tap the + icon on the top right corner of the app’s home screen, tap Start setting up, and follow the instructions to set up your product.
For information on connecting your product to a computer, using voice-activated printing, or solving problems, or for details on reaching Epson support, see the sections on the back of this sheet.
3 Fill ink tanks
Warning: Keep the ink bottles out of the reach of children and do not drink the ink.
Caution: This product requires careful handling of ink. If ink spills, wipe it off immediately with a damp towel to avoid permanent stains. If ink gets on your clothes or belongings, it may not come off. Note: · Epson cannot guarantee the quality or reliability of third-party ink. · Use the ink bottles included with the printer to set up the product. Part
of the ink will be used to charge the print head. These bottles may print fewer pages compared with replacement ink bottles. · Epson strongly recommends the use of genuine ink to ensure optimal print quality and performance.
1 With the scanner unit raised, open the ink tank cover, then
open the cap for the black (BK) ink tank.

Note: Refer to the color-coded sticker to identify the color of each tank.

2 Unpack the black (BK) ink bottle. Hold the ink bottle upright
and slowly turn the bottle cap to remove it.

8 Close the ink tank cover, then close the scanner unit.

Caution: Do not shake or squeeze the ink bottle. Do not touch the top of the ink bottle after its cap is removed.
3 Insert the ink bottle into the filling port.

9 Raise the control panel, then press the power button to
turn on the product. The power light flashes.

Note: Do not force the bottle into position; each bottle is keyed for each color.
4 Wait for the ink to fill the tank.
Do not squeeze the bottle or allow it to contact any other surface.
Note: Ink flows into the tank and stops automatically when the ink tank is filled to the upper line. If ink does not flow from the bottle, lift and reinsert the bottle.
5 When the ink tank is full, remove the ink bottle and securely
close it with the bottle cap. If any ink remains in the bottle, close the bottle and store it for later use.

Note: If an error code appears, turn off the product and check that no protective material has been left inside the product.
10 Select your language.
Note: You can change this setting later using the product’s control panel. For more information, see the online User’s Guide.
11 When an Epson Smart Panel message appears on the
LCD screen, select the option to continue setup without the app.
12 When the message to see the Start Here sheet appears
on the LCD screen, press and hold the help button for 5 seconds.
13 Follow the on-screen instructions to start ink charging. Ink
charging takes about 10 minutes.
Note: When the power light stops flashing, ink charging is complete. Once initial setup of the printer is complete, you can top off the ink tanks with any remaining ink. See the online User’s Guide for instructions.
Caution: Do not unplug or turn off the product, or raise the scanner unit while the product is charging or you’ll waste ink.

Note: Do not leave the ink bottle inserted; otherwise the bottle may be damaged or ink may leak.
6 Securely close the black ink tank cap.
7 Repeat the previous steps for the other colors.

Note: After some ink is used for charging, the rest is available for printing.
14 Press the OK button to proceed with initial setup.
15 Follow the on-screen instructions to adjust the print
quality of your product.
Note: · You need to load paper before you can adjust the print quality.
See “Load paper” on this sheet for details. · Select Adjust Later if you want to adjust the print quality later.
For more information, see the online User’s Guide.
Caution: After setup, periodically inspect the ink levels to ensure they do not fall below the lowest lines on the tanks. Prolonged use when ink is below the lowest line could damage the product. See the online User’s Guide for refilling instructions.

4 Load paper
See the online User’s Guide for information about loading capacity, available paper types and sizes, using the ADF, and loading envelopes.
1 Make sure the product is not charging ink, and then open
the front of the paper cassette and pull out the paper cassette.
2 Slide the side edge guides all the way out.
3 Insert paper with the glossy or printable side down.

5 Install software
Note: · An Internet connection is required to obtain the product software. · To print from a ChromebookTM, go to
http://epson.com/support/chromebookprint (U.S.) or http://epson.ca/support/chromebookprint (Canada) for instructions.
1 Make sure the product is NOT CONNECTED to your
computer.
Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable.
2 Download and run your product’s software package. For
the latest software, visit http://epson.com/support/et3843 (U.S.) or http://epson.ca/support/et3843 (Canada).
3 Follow the instructions on the computer screen to run the
setup program.
4 When you see the Select Your Connection screen, select
one of the following and follow the on-screen instructions:
· Wireless connection In most cases, the software installer automatically attempts to set up your wireless connection. If setup is unsuccessful, you may need to enter your network name (SSID) and password.
· Direct USB connection Make sure you have a USB cable (not included).
· Wired network connection Make sure you have an Ethernet cable (not included).

Note: Make sure the paper is loaded against the front edge guide and not sticking out from the end of the cassette.
4 Slide the side edge guides against the paper, but not too
tightly. Close the front of the cassette.
5 Keep the cassette flat as you insert it all the way. 6 Pull out the output tray.

Mobile and voice-activated printing
· Print directly from your AndroidTM (v4.4 or later) device*. Simply connect your printer and device to the same network and tap the menu icon to select the print option.
· Turn your mobile device into an intuitive, easy-to-use printing and scanning control center with Epson Smart Panel. Download the app from your mobile device’s app store.
· Print from wherever you are, next to your printer or remotely, with Epson ConnectTM. Learn more at http://epson.com/connect (U.S.) or http://epson.ca/connect (Canada).
· Use voice-activated assistants to print a variety of creative and everyday items from your Epson® product. Simply add your product to an Epson Connect account, then link the account to a voice-activated assistant. See http://epson.com/voice (U.S.) or http://epson.ca/voice (Canada) for more information.
* May require the Epson Print Enabler or Mopria Print Service app from Google PlayTM.

7 Select the paper settings on the product’s control panel.

Any problems?
Network setup was unsuccessful. · Make sure you select the right network name (SSID). · Restart your router (turn it off and then on), then try to connect
to it again.

· The printer can only connect to a network that supports 2.4 GHz connections. If your router offers both 2.4 GHz and 5 GHz connections, make sure 2.4 GHz is enabled.
· If you see a firewall alert message, click Unblock or Allow to let setup continue.
· If your network has security enabled, make sure you enter your network password (WEP key or WPA passphrase) correctly. Be sure to enter your password in the correct case.
· Print a network connection report to identify network problems and solutions. See your online User’s Guide for instructions.
There are lines or incorrect colors in my printouts. Run a nozzle check to see if there are any gaps in the printout. Then clean the print head, if necessary. See the online User’s Guide for more information.
The product’s screen is dark. Make sure your product is turned on, and press any button to wake it from sleep mode.
Setup is unable to find my product after connecting it with a USB cable. Make sure your product is on and the USB cable is securely connected.

Need paper and ink?
Ensure brilliant results with Epson specialty and plain papers, engineered specifically for Epson printers. Find Epson papers and Epson Genuine ink at http://epson.com (U.S. sales) or http://epson.ca (Canadian sales) and at Epson authorized resellers. Call 800-GO-EPSON (800-463-7766).

ET-3843 replacement inks

Black 502120

Cyan 502220

Magenta 502320

Yellow 502420

Any questions?
User’s Guide
Windows: Click the icon on your desktop or Apps screen to access the online User’s Guide.
Mac: Click the icon in Applications/Epson Software/Guide to access the online User’s Guide.
If you don’t have a User’s Guide icon, go to the Epson website, as described in “Technical support.”
Videos
Visit http://epson.com/support/et3843videos (U.S.) or http://epson.ca/support/et3843videos (Canada) to view support videos.
Technical support
Visit http://epson.com/support/et3843 (U.S.) or http://epson.ca/support/et3843 (Canada) to download drivers, view manuals, get FAQs, or contact Epson.
Call (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 7 am to 4 pm, Pacific Time, Monday through Friday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.
Recycling
Epson offers a recycling program for end-of-life hardware and ink bottles. Please go to http://epson.com/recycle (U.S.) or http://epson.ca/recycle (Canada) for information on how to return your products for proper disposal.

EPSON and Epson Smart Panel are registered trademarks, EPSON Exceed Your Vision is a registered logomark, and Epson Connect is a trademark of Seiko Epson Corporation.

Designed for Excellence is a trademark of Epson America, Inc.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.

Mac is a trademark of Apple Inc., registered in the U.S. and other countries.

Android, Chromebook, and Google Play are trademarks of Google LLC.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice.

Printed in XXXXXX

CPD-61955