Wall Bar Minimalist Shelf
Product Information
The Wall Bar is a versatile accessory designed for mounting
equipment on walls. It has a length of 755 mm and a diameter of 5
mm. The Wall Bar comes with 2 x 5 x 60mm screws and 2 x 35mm
Universal plugs for installation.
WARNING: Incorrect assembly and installation of the Wall Bar can
cause damage to the attached equipment and its surroundings. The
included universal plugs and screws may, in rare instances, not be
suitable for your wall. Use screws and plugs suitable for your
walls. If you are uncertain, seek professional advice.
Product Usage Instructions
- Identify the desired location on the wall where you want to
install the Wall Bar. - Ensure that the wall is suitable for installation and can
support the weight of the equipment. - Using appropriate tools, drill two holes on the wall at the
desired location. The hole size should match the diameter of the
Universal plugs provided. - Insert the Universal plugs into the drilled holes until they
are flush with the wall surface. - Position the Wall Bar over the Universal plugs, aligning the
large holes on the Wall Bar with the plugs. - Insert the 2 x 5 x 60mm screws through the large holes on the
Wall Bar and into the Universal plugs. - Gently push down the Wall Bar until it locks in place.
- Adjust the screws accordingly to ensure that the Wall Bar is
securely seated in the slot. - Verify that the Wall Bar is stable and properly installed
before attaching any equipment.
If you are unsure about the installation process or the
suitability of the provided screws and plugs for your wall, it is
recommended to seek professional advice.
Wall Bar
Assembly Guide
Wall Bar
755 mm
5 mm
Mark two points, using a ruler and a spirit level. Distance 755 mm. Drill two holes Ø6 mm, and insert the included wall plugs, then the screws. The screws should be placed with a distance of approximately 5mm, from the head to the wall.
Place the large hole over the screw and gently push down the Wall Bar until it locks in place. Adjust the screw accordingly to make sure the bar seats securely in the slot.
Parts
2 x 5 x 60mm screw 2 x 35mm Universal plugs
WARNING!
!
Incorrect assembly and installation of the Wall Bar can cause damage to the attached equipment and its surroundings. The included universal plugs and screws may, in rare instances, not be suitable for your wall. Use screws and plugs suitable for your walls. If you are
uncertain, seek professional advice.
