motorola MOTOBUDS-BK Motobuds Charge True Wireless Bluetooth in-Ear Headphones
Instructions
- Charging:
Fully charge before use The device can be powered through a USB-C from any CE compliant power source that implement the European interface as requested by EN 301 489-52. - Pairing:
- Ensure both buds are inside the charging case and take out both buds. The buds will flash blue and red.
- Select “Motobuds Charge” from the smartphone Bluetooth menu.
- Ensure both buds are inside the charging case and take out both buds. The buds will flash blue and red.
- Fitting:
- To optimize the best fit and audio experience, it is recommended to try dierent earbud sizes.
- Insert the Motobuds into your ear and rotate to fit comfortably.
- To optimize the best fit and audio experience, it is recommended to try dierent earbud sizes.
- Basic Operation:
Additional Operation
| Factory reset | 1. Ensure earbuds are not connected to phone 2. Double press MFB and then hold MFB for 5 second until LED shows blue and red 3. Put both buds into the charging case |
| Reject a call | MFB 2sec |
| Receive incoming and on hold ongoing call | Single Press MFB |
| LED Indicator | |
| Pairing | Red-blue flash |
| Standby | Blue flash |
| Charging | Red steady |
| Fully charged | O |
| Battery low | Red flash |
