Nathan James 96201 Remi Tufted Headboard Instruction Manual (+ PDF)

Description	Qty
Left Metal Rail (A)	1
Right Metal Rail (B)	1
Headboard (C)	2
Metal Connector (D)	1
M4*35 mm Screw	14
Anchors	14
Allen Key	1
M4*14 mm Bolt	8
M6*12 mm Bolt	4
EVA Pad	12
Mounting Installation Template (7)	1
Bracket (8)	8

IMPORTANT:

Do not tighten bolts / screws completely until all bolts /
screws are lined up and inserted into holes.
Do not over tighten screws and bolts to avoid stripping.
Please use hand tools to assemble this product. Do not use
power tools.

Product Usage Instructions

Step 1 – Assemble the Left and Right Metal Rails

Use the Metal Connector (D) to assemble the Left Metal Rail (A)
and Right Metal Rail (B).
Secure with M6*12 mm Bolts (5).
Remember to remove the 2 bolts in the Metal Connector (D)
before assembling the rail.
Note: Part (A), (D), and (B) need to be on the same level
before you secure them with the M6*12mm bolts (5).

Step 2 – Using the Mounting Installation Template

Unroll the paper Mounting Installation Template (7) and remove
the adhesive backing.
Locate where you would like to mount the headboard and apply
Mounting Installation Template (7) to the wall in that location.
Make sure the template and holes are level.
Using the template as a guide, match the circular plates on the
metal rails with the circular cut-outs on the top of the paper
template in order to accurately mark where all the holes will need
to be.
Using the holes in the template and the metal rail as a guide,
mark the location of each hole on the wall. These will become your
guides as to where to drill the holes for the wall anchors.
Slowly remove the paper, ensuring that all holes have been
marked.
Drill each hole with a 1/4 drill bit.

Step 3 – Install Brackets on the Wall

Insert the Anchors (2) and then mount the Brackets (E) with
M4*35 mm Screws (1) into the Anchors (2).
See the graphic for hole locations and bracket
orientation.

Step 4 – Attach the Brackets to the Headboards

Attach the Brackets (8) to the back of the Headboards (C) with
M4*14 mm Bolts (4).
Repeat this process for both Headboard panels.

Step 5 – Apply EVA Pads to the Back of Headboard Panels

Apply the EVA Pads (6) to the back of the Headboard panels
(C).

Step 6 – Mount the Panel on the Wall

Mount the panel on the wall by matching the brackets on the
back of the panel with the brackets that you just installed on the
wall.

Step 7 – Secure the Velcro Straps

Flip the straps over the rail and secure them with the
velcro.

Now you can sit back, relax, and enjoy your new headboard!

View Fullscreen

Let’s build the
Remi Tufted Headboard
SKU 96201
0 MINUT
30
SSEMBL

3 Y

E A

Scan me!
Inspiration Digital Instructions Free Lifetime Warranty

22-0208

Ok, let’s get rolling
This should be easy, just follow our instructions and you will be back to Netflix in no time.
Estimated time for assembly
30:00
What you need · Some of your favourite bubbly
or your preferred relaxant · Use the packaging carton as
a working surface to prevent product damage during assembly · Phillips head screwdriver · Drill with 1/4″ drill bit
Toll-free at 1-866-619-1004 [email protected] Nathanjames.com/help

What’s included

Description

Qty

A Left Metal Rail

B Right Metal Rail

C Headboard

D Metal Connector

1 M4*35 mm Screw

2 Anchors

3 Allen Key

4 M4*14 mm Bolt

5 M6*12 mm Bolt

6 EVA Pad

7 Mounting Installation Template

8 Bracket

Scan me!
Inspiration Digital Instructions Free Lifetime Warranty

The goods

IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.

Step 1
Let’s get this thing fired up! Assemble the Left and Right Metal Rails (A)(B) using the Metal Connector (D). Secure with M6*12 mm Bolts (5). Remember to remove the 2 bolts in the Metal Connector (D) before assembling the rail.

A
A 55

D 5
D
Please note: Part (A), (D), and (B) need to be on the same level before you secure them with the M6*12mm bolts (5).
4

Step 2 Using the Mounting Installation Template

Unroll it
Unroll paper Mounting Installation Template (7) and remove the adhesive backing.
Place it
Locate where you would like to mount the headboard and apply Mounting Installation Template (7) to the wall in that location. Make sure the template and holes are level.
Match it
Using the template as a guide, match the circular plates on the metal rails with the circular cut-outs on the top of the paper template in order to accurately mark where all the holes will need to be.

7 7 7

Step 2 Cont.
Mark it
Using the holes in the template and the metal rail as a guide, mark the location of each hole on the wall. These will become your guides as to where to drill the holes for the wall anchors.
Remove it
Slowly remove the paper, ensuring that all holes have been marked.
Drill it
Drill each hole with a 1/4″ drill bit.

7 7

Step 3
Install Brackets (8) on the wall. First insert the Anchors (2), then mount the Brackets (E) with the M4*35 mm Screws (1) into the Anchors (2). See the graphic below for hole locations and bracket orientation.

2 8 1

2 8

28 1
1

2 8 1

Step 4
Attach the Brackets (8) to the back of the Headboards (C) with M4*14 mm Bolts (4). Repeat this process for both Headboard panels.

2
8 1

8 4
C
7

8 4
x2

Step 5
Apply the EVA Pads (6) to the back of the Headboard panels (C).
6
x2
8

Step 6
Mount the panel on the wall by matching the brackets on the back of the panel with the brackets that you just installed on the wall.

Now it’s time for the Rail! First, insert the Anchors (2), then mount the Rail (A)(B) (D) with M4*35 mm Screws (1) into the wall anchors.
2

1 1

2 1

Step 7
You made it to the last step! We knew you could do it. Now all that’s left to do is to flip the straps over the rail and secure with the velcro. Time to sit back, relax, and enjoy your new headboard!
10

No heartburn, when we handle the return
Give us a call 1-866-619-1004 or shoot us a message at [email protected] we will issue you a free replacement with zero hassle.

Our way
Give us a call Replacement You

Their way
Re-package item Schedule pick up Track package Replacement You

We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.

Safety first, fun later
We want your Remi Channel Tufted Hanging Headboard to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months.
For proper care and treatment of fabric & metal please check our website at NathanJames.com/products

Safe use of this product starts with you.
Use this headboard responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.
Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.

Do not modify the structure of this product in any way.
Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which NJ will not be responsible for.

Proper use

DO NOT DO NOT DO NOT DO NOT DO NOT DO NOT

use for commercial purposes put on uneven surface put hot serving liquid directly on headboard use headboard if broken or damaged make temporary repairs use outdoors

We are only in business if you’re happy
For starters, thanks for being you.
Toll-free at 1-866-619-1004 [email protected] NathanJames.com/help
We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen–as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.
Warranty This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q
Did we do alright? Please spread the love! If you are happy with your product, tell your friends and family about us or even better leave us a review online. Spreading the word gives us the opportunity to make more people happy and keep our prices low for your next purchase.
Brooklyn Burdon
Founder, Nathan James
13