Batavia 7062245 4-in-1 Workbench & Step Ladder Transformer Instruction Manual

 7062245 4-in-1 Workbench & Step Ladder Transformer
Instruction Manual

Instructions

BATAVIA workbench and stepladder, Model: BT-WSL001
(Stepladder: Maximum load:150 kg)
(Workbench: Maximum load:100 kg)
Thank you for choosing our product.
Before using the ladder, please carefully read the instructions for use and note the warning signs.

Warnings

1. The ladder should only be used on solid, flat, level, and non-slip surfaces with the sufficient weight capacity. Using the ladder on oily and wet surfaces can cause accidents due to the risk of slipping.
2. The ladder should only be used by one person at a time. The use by 2 people or exceeding the stated maximum load on the rating plate is strictly forbidden.
3. Make sure that you do not lean out too far when working on the ladder and do not lean over sideways, this may lead to tipping the ladder over. Stepping off the ladder sideways is not permitted
4. It is not allowed to place anything on the steps to increase the working height. As this would not be securely connected to the ladder it can lead to accidents.
5. It is strictly forbidden for children to climb the ladder, play on it, or use it in any other way.
6. Visually inspect the ladder before use. The ladder should not be used if it is damaged.
7. Before using the ladder ensure it is fully and securely expanded.
8. The ladder must be placed on its feet and not the rungs or any other part.
9. Doors, apart from emergency exits, and windows in the working area should be locked where possible.
10. Always wear suitable shoes before stepping on the ladder.
11. Avoid leaning over the sides e.g. when drilling in masonry or concrete.
12. Repairs and maintenance work on the ladder should only be done by a competent person and be in accordance with the manufacturer‘s instructions.
13. Store the ladder in a clean and dry place.
14. Before each use, the workbench must be examined for damage.
15. Attention! Risk of tipping over when overhanging work pieces.
16. Please keep for future reference – read it carefully

Remove dirt on the stepladder, such as wet paint, oil or snow before use. Do not use the stepladder on slippery ground, such as ice, wet floor, shiny or dirty surfaces, soft or sloping ground, etc. Always take additional safety measures to prevent slipping and to ensure stability. Do not use the stepladder in bad weather, e.g. strong wind. Place the stepladder on a stable, level and immovable surface.

Batavia B.V., Weth. Wassebaliestraat 6d, NL-7951 SN, Staphorst, Netherlands
Customer Services
Monday till Friday from 8 am until 4 pm  00800 66477400
Website: www.batavia.eu | Email: [email protected] / [email protected]

References

• Home - Batavia B.V.