Backyard Discovery 2206069com Norwood 10 Ft. X 10 Ft. Light Brown Gazebo Installation Guide

2206069COM Norwood 10 ft. x 10 ft. Light Brown Gazebo

Product Information: The product is a kit that
requires assembly. It comes with various parts and requires the use
of specific tools for assembly. There are different assembly
methods available, including a printed assembly manual, a 3D
interactive instruction app called BILT, or a combination of both.
Product Usage Instructions:

1. Pre-Assembly Step 1 – Sorting Parts: Before
   starting the assembly process, it is important to note that the
   cartons are not organized by board number. Take the time to sort
   the parts to ensure easy access during assembly.
2. Pre-Assembly Step 2 – Tools Required: Gather
   the following tools needed for assembly:
   • Drill Attachments: Phillips Head
   • Open End Wrenches: 1/2″ & 9/16″
   • Cordless Drill or Electric Drill
   • Drill Bits: 1/8″, 3/16″, 3/8″, and 7/16″
   • Phillips Screwdriver
   • 3/8 Drive Ratchet
   • Sockets: 1/2″ & 7/16″ STD Sockets, 1/2″ & 7/16″ Deep
     Sockets
   • Claw Hammer
   • Square
   • Rubber Mallet (Optional)
   • Tape Measure
   • Level: 24″
3. Pre-Assembly Step 3 – Choose Your Assembly
   Method: You have three options for assembly instructions:
   1. Printed Assembly Manual: Use the included printed manual for
      step-by-step instructions.
   2. BILT APP: Download and use the BILT app for interactive 3D
      instructions.
   3. Combination of Printed Manual and BILT APP: You can use both
      the printed manual and the BILT app, but note that step numbers may
      differ between the two methods. Choose this option if you prefer a
      comprehensive approach.

PRE-ASSEMBLY STEP 1 – SORTING PARTS
It is critical for ease of assembly that you take the time to sort and organize the wood and hardware. WOOD PARTS: · Organize wood parts by the three-digit, alpha-numeric number stamped on each board (ex. P01). · If there are multiple boards with the same stamped number, stack those pieces together. · Stamps can be found on the flat surface of the boards or on the end of the boards. · Allow yourself plenty of room – the wood pieces can take up a significant amount of space.
NOTE: CARTONS ARE NOT ORGANIZED BY BOARD NUMBER.
HARDWARE PARTS: · We recommend that you have a separate table to organize the hardware. · Hardware bags are printed with a seven-digit, alpha-numeric part number. · You can organize your hardware by part number or group by hardware type (i.e. bolts, nuts, etc.). · During assembly you only need to reference the last four digits of the number.
H100194 BOLT WH (x2) 5/16 x 2-1/2
9

PRE-ASSEMBLY STEP 2 – TOOLS REQUIRED

Drill Attachments: Phillips Head

Open End Wrenches 1/2″ &
9/16″

Cordless Drill or Electric Drill

1/8″, 3/16″, 3/8″ & 7/16″ Drill Bits
Phillips Screw Driver

3/8″ Drive Ratchet, 1/2″ & 7/16″ STD Sockets 1/2″ & 7/16″
Deep Sockets

Claw Hammer Square

Rubber Mallet – Optional

Tape Measure

Level 24″

10

PRE-ASSEMBLY STEP 3 – CHOOSE YOUR ASSEMBLY METHOD
There are several types of assembly instructions available to you. 1. Printed Assembly Manual included with your set 2. BILT APP – 3D interactive instructions 3. Combination of the Printed Manual and BILT APP (Note: Step numbers can differ between the two
methods)
11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37