Frisco 360993 3 In 1 Dog And Cat Stroller With Detachable Carrier Instruction Manual

360993 3 In 1 Dog and Cat Stroller With Detachable Carrier

Frisco 3-in-1 Dog & Cat Stroller With Detachable Carrier,
Black

Product Code: 360993

Components

• Cup Holder (1)
• Back Seat Strap (1)
• Carrier (1)
• Support Boards (2)
• Front wheels (2)
• Pad (1)
• Visor (1)
• Frame with Assembled Back Wheels and Cargo Basket (1)

Assembly

DO NOT SKIP THIS STEP

Step 1 – Unfold

1. Unfold the pet stroller and snap it into place. Make sure that
   the black locks on the sides are locked into place.

Step 2 – Front Wheels

2. Insert the front wheels into the legs until they snap into
   place. (Pro tip: give it a good tug to make sure it’s
   secured.)

Step 3 – Back Wheels

3. Lock the rear wheels by simply pushing down the brake levers on
   either side.

Step 4 – Carrier Assembly

4. Slide both support boards (they look like two flat, grey
   squares) into the open slots on the carrier.
5. Make sure the support bars face outside of the carrier have
   been inserted correctly. Fold the fabric over and press the
   hook-and-loop fasteners together, then zip to close.
6. Place the pad into the center of the carrier.

Step 5 – Mounting the Carrier

5. Zip the carrier shut and place it on top of the cargo basket.
   You should see a buckle on either side: use them to secure the
   carrier in place. Use the provided straps to tighten over the
   stroller frame if necessary.

Attachments

• Cup Holder – Attach the cup holder to your preferred side of
  the handle.
• Visor – Snap the clamps onto the frame at the desired
  height.

Car Seat Mode

If you’d like to switch the stroller to car seat mode, here’s
what you do:

WARNING

• Remove the carrier from the stroller.
• Pull up both side locks.
• Fold the pet stroller.
• Secure the side safety lock.

Frisco 3-in-1 Dog & Cat Stroller With Detachable Carrier, Black
360993

Components
Cup Holder (1)

Back Seat Strap (1)

Carrier (1)

Support Boards (2)

Front wheels (2)

Pad (1)

Visor (1)

Frame with Assembled Back Wheels and Cargo Basket (1)

Assembly
DO NOT SKIP THIS STEP
Step 1 – Unfold
1
Unfold the pet stroller and snap it into place. Make sure that the black locks on the sides are locked into place.

Step 2 – Front Wheels

2

3

front wheels into the legs until they snap into place. (Pro tip: give it a good tug to make sure it’s secured.)

Step 3 – Back Wheels
Lock the rear wheels by simply pushing down the brake levers on either side.

Step 4 – Carrier Assembly

4a

4b

Slide both support boards (they look like two flat, grey

squares) into the open slots on the carrier.

sure the

support bars face outside of the carrier

been inserted correctly. Fold the fabric over and press

the hook-and-loop fasteners together, then zip to close.

Place the pad into the center of the carrier.

Step 5 – Mounting the Carrier
5
Zip the carrier shut and place it on top of the cargo basket. You should see a buckle on either side: use them to secure the carrier in place. Use the provided straps to tighten over the stroller frame if necessary.

Attachments
Cup Holder Attach the cup holder to your preferred side of the handle.

Visor
Now it’s time to attach the visor. Just snap the clamps onto the frame at the desired height.

Car Seat Mode
If you’d like to switch the stroller to car seat mode, here’s what you do:
· Detach the carrier from the stroller and place it sideways on the car seat. Next, you’ll want to feed the seatbelt through the side loops of the carrier — they’re located underneath the side buckle.
· Now, attach the back seat strap to the carrier and over the headrest for extra support (this strap may also be used as a shoulder strap when used as a portable carrier).

WARNING
· Not intended for children.
· NEVER leave pet unattended. ALWAYS keep pet in view while in the stroller. · Adult assembly required. Take care when unpacking and assembling; contains small parts and some items with sharp edges.
· To prevent a possible choking hazard, remove and discard packing material before using this product.
· DO NOT carry or roll stroller on stairs or escalators with pet inside.
· DO NOT hang heavy items on handlebar as this can cause the stroller to tip. · Be sure stroller is fully assembled and locked in unfolded position before using.
· ALWAYS exercise care when going over curbs or steps, and never use stroller for anything other than transporting your pet.
· Push stroller at a normal walking pace only; faster strolling can cause a loss of control and injury to the pet. · DO NOT place hot liquids in cup holder.
· DO NOT use stroller if any parts are missing or broken.
· DO NOT carry additional pets, goods, or accessories in or on this stroller except as advised in these instructions.
· DO NOT exceed the listed weight restriction.

in hinge areas. · Make sure pet is not in the seat or near the stroller when folding or unfolding. · NEVER leave stroller on a hill or incline, even with brakes set. Stroller may tip, injuring the pet. · To avoid accidental rolling, ALWAYS set brakes when stroller is not being pushed. · DO NOT suspend strings or toys from the canopy to avoid strangulation. · When making adjustments to the stroller, ALWAYS ensure that all parts of the pet’s body are clear of any moving parts of the stroller.
To fold the stroller:
1. Remove the carrier from the stroller 2. Pull up both side locks 3. Fold the pet stroller 4. Secure the side safety lock