S7300-24X2C Stackable L3 10G Switch
QSFPTEK S7300-24X2C Stackable L3 10G Switch
The QSFPTEK S7300-24X2C is a full 10GE TOR switch designed for
high-performance computing, data center, and high-end campus
applications. It features advanced hardware architecture designs
and supports up to 2.56Tbps switching capacity in 1U. The switch
includes 24x 10GE SFP+ ports and 2x 100GE/40GE QSFP28 ports.
Product Characteristics
- Carrier-Level Aggregation Layer-3 Ethernet
Switch: The S7300-24X2C is an innovative BVSS (Virtual
Switch System) Stacking solution that virtualizes multiple physical
devices into one. This improves performance, reliability, and
management capabilities of the virtual system. - Improved Performance: BVSS makes full use of
each link in the physical device cluster, which avoids STP blocking
on links and protects the original link to the maximum. - High Reliability: The logic control plane,
service control plane, and service data plane are separated based
on an advanced distribution mechanism and efficient cross-physical
link aggregation function. This allows the device to support
continuous layer3 routing forwarding, avoiding service interruption
as a result of a single point of failure. - Easy Management: BVSS realizes single IP
management, greatly improving networking efficiency and lowering
operating costs. - Rich Data Center Services: The switch supports
BVSS, which virtualizes multiple physical devices into a single
logical element. The virtualized system is superior to the
independent physical device in performance, reliability,
flexibility, and management. - Security: The switch includes advanced
hardware infrastructure design that realizes the level-based packet
schedule and packet protection, prevents DoS-/TCP-related SYN
Flood, UDP Flood, Broadcast Storm or large traffic attacks, and
supports level-based command line protection, endowing different
levels of users with different management permissions. It also
supports IEEE 802.1x, Radius, and BDTacacs+ security authentication
mechanisms.
Product Usage Instructions
To use the QSFPTEK S7300-24X2C Stackable L3 10G Switch:
- Install the switch into a rack or cabinet using the provided
mounting brackets and screws. - Connect the power supply to the switch and power it on.
- Connect Ethernet cables from your devices to the SFP+ or QSFP28
ports on the switch. - Configure the switch using the management interface. The switch
supports BVSS, which allows you to virtualize multiple physical
devices into a single logical element for improved performance,
reliability, flexibility, and management. - Enable security features such as IEEE 802.1x, Radius, and
BDTacacs+ security authentication mechanisms to protect against
DoS-/TCP-related SYN Flood, UDP Flood, Broadcast Storm or large
traffic attacks.
For more detailed instructions on configuring and managing the
QSFPTEK S7300-24X2C Stackable L3 10G Switch, refer to the user
manual available at www.qsfptek.com or contact [email protected]
for support.
www.qsfptek.com
S7300-24X2C
Stackable L3 10G Switch for Ethernet Aggregation/Core to Metro, Data Center and Enterprise Application
I. Product Overview
QSFPTEK S7300-24X2C is a new generation of full 10GE TOR switch, oriented for high-performance computing, data center and high-end campuses. It adopts our most advanced hardware architecture designs, supporting up to 2.56Tbps switching capacity in 1U and 24x 10GE SFP+ ports + 2x 100GE/40GE QSFP28 ports.
Developed on the basis of BDROS software platform with its own independent intellectual property rights, S7300-24X2C provides high-performance L2/L3/L4 wire speed switching capacity by integrating services such as IPv6, VPN, network security, flow analysis, virtualization, with high reliable techniques including continuous forwarding, graceful restarting and loop network protection, all which works efficiency withing the S7300-24X2C fabric for guaranteed maximum runtime. Besides, supporting the “GreenTouch” architecture and “Smart@CHIP”, this energy-saving switch has a low power consumption of200W.
II. Product Characteristics
Carrier-Level Aggregation Layer-3 Ethernet Switch Innovative BVSS (Virtual Switch System) Stacking
virtualize multiple physical devices into one. The performance, reliability and management capabilities of the virtual system combine to outperform that of individual physical devices.
Improved Performance: BVSS makes full use of each link in the physical device cluster, which avoids STP blocking on links and protects the original link to the maximum.
High Reliability: Based on the advanced distribution mechanism and efficient cross-physical link aggregation function, the logic control plane, service control plane and service data plane are separated. Thus, the device can support continuous layer3 routing forwarding, avoiding service interruption as a
www.qsfptek.com
result of a single point of failure. Easy Management:BVSS realizes single IP management, greatly improving the networking efficiency and
lowering operating costs.
Rich Data Center Services
Supports BVSS, which can virtualize multiple physical devices into a single logical element. The virtualized system issuperior to the independent physical device in performance,reliability,flexibility and management.
Doubled Performance: The virtualized system makes the best use of each link in the device and avoids blocking of STP to the links.
High-reliability: Based on the advanced distributed processing technique and the efficient function of cross-physical device link aggregation, , the S7300-24X2C provides non-stop layer-3 routing forwarding and avoids single points of failure.
Flexibility: The virtual cluster function allows the distance of a cluster system to expand over up to 80KM, breaking the geographic restrictions of traditional cluster techniques.
Easy Management: The whole virtual system realizes single IP unified management and simplifies the management of network device and network topology.
Security+
Equipment-level security: The advanced hardware infrastructure design realizes the level-based packet schedule and packet protection, prevents DoS-/TCPrelated SYN Flood, UDP Flood, Broadcast Storm or large traffic attacks, and supports level-based command line protection, endowing different levels of users with different management permissions.
Perfect security authentication mechanisms: IEEE 802.1x, Radius and BDTacacs+. Supports storm/multicast/unicast limits. ensuring normal running conditions of the equipment when deployed in harsh network conditions. Supports perfect ring detection mechanisms, ensuring long-term network performance stability. Supports port isolation within the same VLAN, DHCP-Snooping, and IP + MAC + Port binding.
Versatile IPv6 Solution
Supports the IPv6 protocol suite, IPv6 neighbor discovery, ICMPv6, path MTU discovery, DHCPv6, etc. Supports Ping, Traceroute, Telnet, SSH, ACL based on IPv6. Supports MLD, MLD Snooping, IPv6 static routing, RIPng, OSPFv3 and BGP4+, etc.
[2]www.qsfptek.com
Supports IPv6 tunnel: manual tunnel, automatic tunnel, GRE tunnel, 6to4 tunnel, ISATAP. Supports IPv4 transiting to IPv6: IPv6 manual tunnel, automatic tunnel, 6 to 4 tunnel, ISATAP tunnel.
Data Center Level High-reliability
Adopts HPS (Hitless Protection System). The key components of he S7300-24X2C such as the power system and the fan system supports redundancy in design. All system modules support hot-swap and seamless switching without need of manual intervention.
Supports redundancy protection mechanisms such as STP/RSTP/MSTP protocol, VRRP protocol, ring network protection, dual uplink active/standby link protection and LACP link aggregation.
Supports ISSU (In-Service Software Upgrade), guaranteeing non-stop forwarding of service data while the system is upgrading.
Supports BFD and realizes fault detection and service recovery in seconds through linking with layer-2 or layer-3 protocol.
Has perfect Ethernet OAM, 802.3ah, 802.1ag and ITU-Y.1731 which can monitor the network operating state in real time and rapidly detect and locate the malfunction.
High Reliability (99.999%): The MTTR of the S7300-24X2C is 50ms, satisfying the requirement for reliable delivery of carrier-level service.
III. Product Specifications
Item
Interface
Console Switching capacity
Forwarding rate Chassis Dimensions(HxWxD)(mm)
Chassis Weight(KG)(empty) Package Dimensions(HxWxD)(mm)
Package Weight(KG) Power consumption no-load Power consumption full-load Power supply(hot-swap) AC: 100V-240V 50Hz±10%
Power status monitoring Total output BTU (1000BTU/H=293W)
Fan number Noise@25°C(dBA)
S7300-24X2C 24x 10GE/GE SFP+ ports, 2x 100GE/40GE QSFP28 ports 1 RJ45 console, 1 MGMT
800Gbps 600Mpps 44x440x350
7.1 94x576x448
8.3 45W 70W 2 (1+1 Redundancy) Hot-swap Support 238.91 4 (3+1 Redundancy) 57
www.qsfptek.com
MTBF(H) Forwarding mode
Flash (MB) DRAM (MB)
MAC Buffer size(MB) Routing table IPv4 Routing table Ipv6
Total SVI
>200,000 Store-forward
64 1024 32K
4 8K 4K 1K
IV. Features
VLAN Spanning Tree
Multicast
IPv4
IPv6 MPLS QoS
4K Active VLAN QinQ & Selective QinQ GVRP, Private VLAN
802.1D (STP) 802.1W(RSTP)and 802.1S(MSTP) BPDU guard, root guard and loopback guard
PIM-SM, PIM-DM IGMP v1/v2/v3 IGMP Snooping IGMP Fast Leave MVR, IGMP filter
Static routing, RIP v1/v2, OSPF, BGP, PBR, ECMP BFD for OSPF, BGP
ICMPv6, DHCPv6, ACLv6 and IPv6 Telnet IPv6 neighbor discovery, Path MTU discovery MLD snooping IPv6 Static Routing, RIPng, OSPFv3, BGP4+ Manual tunnel, ISATAP tunnel, 6 to 4 tunnel
Multi-VRF
CAR, HQoS, MAC/IP/TCP/UDP/VLAN/COS/DSCP/TOS based QoS 802.1P/DSCP priority re-labeling, SP, WRR, and “SP+WRR”, Tail-Drop WRED, flow monitoring and traffic shaping
www.qsfptek.com
Security
Port isolation, Port security, and “IP+MAC+port” binding,MAC sticky DHCP Snooping and option 82, DAI & IP source guard, PPPoE+, IEEE 802.1x, Radius and BDTacacs+L2/L3/L4 ACL flow identification
and filtrationAnti-attack from DDoS, TCP’s SYN Flood, UDP Flood,etc.Broadcast/multicast/unknown unicast storm-control MD5, SHA-256, RSA-1024, AES256, etc.
Reliability
Static/LACP link aggregation, Interface backup BVSS virtual-stacking EAPS and ERPS URPF, LLDP ISSU VRRP 1+1 power backup
Management
Environment Certification
Console, Telnet, SSH v1/2, HTTP/HTTPS SNMP v1/v2/v3, RMON TFTP, FTP, SFTP NTP, SPAN, RSPAN
Operating temperature/humidity:0 -50 ,10%-90% non-condensing Storage temperature/humidity:-20 -70 , 5%-95% non-condensing
CE, FCC, ROHS
Feature Stackability MAC address Capacity Jumbo frame ARP Capacity NDP Capacity VLAN IDs MSTP Instance Num QoS ipv4 flow entry QoS ipv6 flow entry IPv4 ACL IPv6 ACL
[5]S7300-24X2C 8
32K 16K 24567 11468 4K 128 ifp 2686efp 768 ifp 960efp 383 ifp 2686efp 768 ifp 960
www.qsfptek.com
FIBv4 FIBv6 Multicast Routing TableIPv4) Multicast Routing TableIPv6) Maximum VRRP Group Num Maximum MLAG Group Num VXLAN tunnel
efp 383 24567 11468
2K × 255 × ×
V. Ordering Information
Item S7300-24X2C
Description Ethernet routing optical switch with 24x 10GE ports+ 2x 100G ports (1x console port, 1x outband port, 1x USB2.0, 24x 10GE/GE SFP+ ports, 2x 100GE/40GE QSFP28 ports (can expand to 4x 25GE or 4x 10GE ports); 2 hot-swap power slots with dual AC220 power supplies; 4 fans; 1U, 19-inch rack-mounted installation)
[6]
QSFPTEK - Compatible Optical Transceivers Factory Outlet
