S5300-16S8TS4X Stackable Gigabit Ethernet L2++ Switch
Product Information: S5300-16S8TS4X Stackable L2++ 1/10G
Switch
The S5300-16S8TS4X is a stackable L2++ 1/10G switch designed for
SMBs and Enterprises. It features an innovative BVSS switch
stacking technique that virtualizes multiple physical devices into
one, providing superior performance, reliability, and management of
the virtual system. The switch stacking makes full use of each link
in the physical devices, avoiding STP blocking, and protecting the
original link to the maximum extent. The switch is capable of
supporting continuous layer-3 routing forwarding, avoiding service
interruption as a result of a single point of failure. It also
supports industry-level EAPS with zero delay and zero packet loss,
telecom-level Ethernet-ring protection protocol, and various L2
multicast functions.
Product Characteristics:
- Innovative BVSS Switch Stacking Technique
- Improved Performance
- High Reliability
- Easy Management
- Industrial Ethernet Ring with Zero Delay and Zero Packet
Loss - Telecom-Level Ethernet Switch
- Supports Ethernet standard 802.3u, 802.3x, 802.3ad, 802.1d,
802.1p, 802.1q, 802.1w, 802.1ad - Supports powerful ACL functions to access and control L2-L7
data based on physical port, VLAN, MAC, IP and protocol port
ID - Supports In-Service Software Upgrade (ISSU)
- Supports various L2 multicast functions, including
IGMP-Snooping, fast-leave and trans-vlan - Flexible and Convenient Management and Maintenance
- Carrier-Level QoS Policies
Product Usage Instructions:
The S5300-16S8TS4X switch can be used in SMBs and Enterprises to
provide a reliable and efficient network infrastructure. The switch
is easy to manage and maintain, with various management modes such
as the console port, Telnet, SSH, and WEB management mode. The
switch supports TFTP-patterned file upload/download management and
ISSU (In-Service Software Upgrade) to ensure uninterrupted data
forwarding during system upgrades.
The switch also supports powerful ACL functions to access and
control L2-L7 data based on physical port, VLAN, MAC, IP, and
protocol port ID, providing carriers with flexible and various
policy control methods. The carrier-level QoS policies support
priority retagging and complicated flow classification based on
VLAN, MAC, source address, destination address, IP, or priority to
better streamline carrier’s services.
To set up the S5300-16S8TS4X switch, connect it to your network
using Ethernet cables. Connect a computer to the switch using a
console cable or use Telnet/SSH to access the switch remotely.
Configure the switch settings using the management modes provided
by the switch. Use the QSFPTEK NMS smart network management
platform to realize automatic equipment discovery, network topology
management, equipment configuration management, performance data
statistics and analysis, and trouble management.
www.qsfptek.com
S5300-16S8TS4X
Stackable L2++ 1/10G Switch with OSPF, VRRP, DHCP for SMBs and Enterprises
I. Product Overview
S5300-16S8TS4X is a next-generation access 1/10GE switch introduced by QSFPTEK . It is targeted at the IP MAN (metropolitan area network), government and enterprise networks, Internet café and disk- less working environment. It is developed on the basis of high performance hardware and BDROS software platform with QSFPTEK own independent intellectual property rights. It supports functions such as powerful ACL, flexible QinQ, 1:1 or N:1 VLAN switching, Ethernet OAM, carrier-level QoS and industry-level 10GE Ether-ring, ensuring this switch series meets application requirements in all kinds of complicated sites. It also supports layer-3 routing protocol.2900.
II. Product Characteristics
Innovative BVSS Switch Stacking Technique
Innovative Stackable BVSS (Virtual Switch System): S5300-16S8TS4X – virtualizes multiple physical devices into one. The performance, reliability and management of the virtual system are superior to the physical ones.
Improved Performance: Switch stacking makes full use of each link in the physical devices, which avoids STP blocking the link and protects the original link to the maximum extent.
High Reliability: Based on the advanced distribution mechanism and efficient cross-physical link aggregation link function, the logic control plane, service control plane and service data plane are separated. Thus, S5300-16S8TS4X – can support continuous layer-3 routing forwarding, avoiding service interruption as a result of a single point of failure.
Easy Management : Switch stacking realizes single IP management, greatly improving the networking efficiency and lowering the operating cost..
www.qsfptek.com
Industrial Ethernet Ring with Zero Delay and Zero Packet Loss
Supports industry-level EAPS and their protection shift time is less than 50ms. Their high reliability is represented by the null packet loss, which has been proved by many years of application in the Grid, rail transportation and defense systems.
Telecom-Level Ethernet Switch
Supports the telecom-level Ethernet-ring protection protocol with a protection shift time of less than 50ms, STP/RSTP/MSTP, backup of active and standby uplinks and LACP link aggregation to cater to the requirements of high reliability of carriers.
Support Ethernet standard 802.3u, 802.3x, 802.3ad, 802.1d, 802.1p, 802.1q, 802.1w, 802.1ad. Support system status LED, port dynamic lED Provides the perfect Ethernet OAM mechanism to monitor the network running status in real time for rapid
trouble locating and detection. Supports powerful ACL functions to access and control L2-L7 data based on physical port, VLAN, MAC, IP
and protocol port ID, and providing carriers flexible and various policy control methods. Supports In-Service Software Upgrade (ISSU) to ensure the unremitting data forwarding during system
upgrade. Supports various L2 multicast functions, including IGMP-Snooping, fast-leave and trans-vlan
Flexible and Convenient Management and Maintenance
Supports management modes such as the console port, Telnet, SSH, etc. Supports the WEB management mode, which is easy and efficient so that it makes installation and
debugging convenient. Supports TFTP-patterned file upload/download management. Supports ISSU (In-Service Software Upgrade). Supports SNMP and QSFPTEK NMS smart network management platform to realize automatic
equipment discovery, network topology management, equipment configuration management, performance data statistics and analysis and trouble management
Carrier-Level QoS Policies
Supports priority retagging and complicated flow classification based on VLAN, MAC, source address, destination address, IP or priority to better streamline carrier’s services.
www.qsfptek.com
Supports provides flexible bandwidth control policies and supports port-/flow-based flow limit, and ensuring the line speed forwarding of each port to make sure the high quality of video, audio and data services.
Supports 8 priority queues by each port. Supports multiple queue schedule algorithms such as SP, WRR, and SP+WRR”.
Versatile IPv6 Solutions
Supports the IPv6 protocol suite, IPv6 neighbor discovery, ICMPv6, path MTU discovery, etc. Supports Ping, Traceroute, Telnet, SSH, ACL and so like on the basis of IPv6, meeting IPv6 networks’
equipment management requirements and service control requirements.
Perfect Security Mechanisms
Equipment-level security: The advanced hardware infrastructure design realizes the level-based packet schedule and packet protection, prevents DoS-/TCP- related SYN flood, UDP flood, broadcast storm or large traffic attacks, and supports level-based command line protection, endowing different levels of users with different management permissions.
Supports perfect security authentication mechanisms: IEEE 802.1x, Radius and BDTacacs+.Supports storm/multicast/unicast limit to ensure the normal running of equipment in harsh network conditions.
Supports a perfect ring detection mechanism to e n s u r e t h e l o n g – t e r m s t a b l e r u n n i n g o f network.Supports port isolation within the same VLAN, DHCP-Snooping, and IP plus MAC plus Port binding for ensuring user data security;
III. Product Specifications
Item
Interface
Console Switching capacity
Forwarding rate Chassis Dimensions(HxWxD)(mm)
Chassis Weight(KG)(empty) Package Dimensions(HxWxD)(mm)
Package Weight(KG)
S5300-16S8TS4X 16x 100/1000M SFP ports 8x 1G RJ45/SFP Combo ports 4x 10GE/GE SFP+ uplink ports
1 128Gbps 96 Mpps 44x440x280
4 94x576x448
5.2
www.qsfptek.com
Power consumption no-load Power consumption full-load Power supply AC: 100V-240V 50Hz±10% Total output BTU (1000BTU/H=293W)
Fan number Noise@25°C(dBA)
MTBF(H) Forwarding mode
Flash (MB) DRAM (MB)
MAC Buffer size(MB) Interface vlan Routing table IPv4 Routing table Ipv6
<18W 38W
1 153.58
2 45 >200,000 Store-forward 16 256 16K 2 64 512 129
IV. Features
VLAN
4K Active VLAN QinQ & Selective QinQ GVRP, Private VLAN Voice VLAN
Spanning Tree
802.1D (STP) 802.1W(RSTP)and 802.1S(MSTP) BPDU guard, root guard and loopback guard
Multicast
IP QoS Security
IGMP v1/2/3 IGMP Snooping IGMP Fast Leave IGMP Filter MVR Static route RIP, OSPF IP v4/v6 dual stack DHCP Server/Client/Relay CAR, HQoS, MAC/IP/TCP/UDP/VLAN/ COS/DSCP/TOS based QoS, 802.1P/DSCP priority re- labeling, SP,WRR, and “SP+WRR” Tail-Drop, WRED, flow monitoring and traffic shaping Port isolation, Port security, and “IP+MAC+port” binding, MAC sticky
DHCP Snooping and option 82, DAI& IP source guard
www.qsfptek.com
Reliability Management
DHCP Environment Certification Accessories
IEEE 802.1x, Radius and BDTacacs+ L2/L3/L4 ACL flow identification and filtration Anti-attack from DDoS,
TCP’s SYN Flood, UDP Flood, etc Broadcast/multicast/unknown unicast storm-control Md5, SHA-256, RSA-1024, AES256,etc Static/LACP link aggregation, Interface backup EAPS and ERPS ISSU Console,Telnet,SSH v1/2,HTTP,HTTPS SNMP v1/v2/v3, RMON TFTP, FTP, SFTP NTP ZTP(Zero Touch Provisioning) SPAN, RSPAN DHCP server/relay/client DHCP snooping/option82 Operating temperature/humidity:-10°C-50°C, 10%-90%
non-condensing Storage temperature/humidity:-20°C-70°C, 5%-90% non-condensing CE, FCC,ROHS
Power cord, rackmount kits, console cable
Feature Stackability MAC address Capacity Jumbo frame ARP Capacity NDP Capacity VLAN IDs MSTP Instance Num QoS ipv4 flow entry QoS ipv6 flow entry IPv4 ACL IPv6 ACL
FIBv4 FIBv6 Multicast Routing TableIPv4) Multicast Routing TableIPv6) Maximum VRRP Group Num Maximum MLAG Group Num
S5300-16S8TS4X 2
16K 9K 2036 2040 4K 32 1150(×egress) 512 1150(×egress) 512 2036 2040 × × 255 ×
www.qsfptek.com
VXLAN tunnel
×
V. Ordering Information
Item S5300-16S8TS4X
Description Ethernet Layer-2++ switch with 24x GE and 4x 10GE ports (1x Console port, 16x 100M/1000M SFP ports, 8x 1G RJ45/SFP Combo ports, 4x 10GE/GE SFP+ uplink ports; 100 to 240 VAC input, 60 HZ, the cooling fan, 1U, standard 19 inch rack-mounted installation)
[6]
QSFPTEK - Compatible Optical Transceivers Factory Outlet
