Daxys Tail Light User Manual

Product Information

Model: Daxys Tail Light

The Daxys Tail Light is a compact and lightweight rear bicycle
light. It has a COB light source that provides a maximum brightness
of 15 lumens. The light has a built-in 200mAh battery that can be
charged using a micro USB cable with an input of 5V/0.1A. It has a
visible beam distance of over 1000m and a waterproof rating of
IPX4, making it suitable for use in various weather conditions.

The Daxys Tail Light has four different lighting modes: 15 lm
daytime flash, 5 lm high flash, 2 lm steady light, and 2 lm low
flash. It also has a modes memory function that remembers the last
lighting mode used. Additionally, the light has a battery indicator
that flashes red to indicate when the remaining power is between
10% to 1%, and it flashes red when charging. The red light stays
constant when the battery is fully charged.

The Daxys Tail Light comes with a silicone strap that can be
easily attached to the seatpost of your bike. The light should be
installed with the thicker side of the silicone downwards, and the
tightness should be adjusted to ensure it is suitable. The light
should be parallel to the ground once installed correctly.

The Daxys Tail Light has dimensions of 54.68*15.6*26mm and
weighs 17g without the strap. With the strap, it weighs 27.8g.

Product Usage Instructions

1. Take out the Daxys Tail Light from the packaging.
2. Install the light on the seatpost of your bike with the thicker
   side of the silicone downwards. Adjust the tightness to ensure it
   is suitable. The light should be parallel to the ground once
   installed correctly.
3. To turn on/off the light, long-press the button for 0.75
   seconds.
4. To select lighting modes, short-press the switch button. The
   different lighting modes are 15 lm daytime flash, 5 lm high flash,
   2 lm steady light, and 2 lm low flash. The light has a modes memory
   function that remembers the last lighting mode used.
5. The Daxys Tail Light has a battery indicator that flashes red
   to indicate when the remaining power is between 10% to 1%, and it
   flashes red when charging. The red light stays constant when the
   battery is fully charged.
6. The Daxys Tail Light can be charged using a micro USB cable
   with an input of 5V/0.1A.