Compliance Information BT T100 Bluetooth – Audio Transmitter
Frequency band:2400 – 2483.5 MHz
Transmit power: 10 mW (max)
| Country/Region | Model: BT T100 |
| USA |  FCC ID: DMOBTT100 |
| Canada | IC: 2099A-BTT100 CAN ICES-3(B)/NMB-3(B) |
| Europe |   |
| United Kingdom |  |
| Australia/New Zealand |  |
| Singapore | Complies with IMDA Standards DBI00582 |
| China |  CMIIT ID: 2018DJ3597 |
| Korea |  R-CRM-SE9- 811100BT T100 Sennheiser electronic GmbH & Co. KG Sennheiser electronic GmbH & Co. KG |
| Japan |  020-180077 |
| Taiwan |  CCAI18LPO 930TO |
| Brazil |  05428-18-07356 |
| Mexico |  IFT: RCPSEBTI8-1407 |
| Indonesia | 58109/SDPPI/2018 2900 |
| Vietnam | |
| Russia |  |
Statements regarding FCC and ISED
FCC Supplier’s Declaration of Conformity (SDoC) SENNHEISER Model No: BT T100
we, Sennheiser Electronic Corporation
- One Enterprise Drive
- Old Lyme
- CT 06371
- USA
Tel: +1 (860) 434 9190
Fax: +1 (860) 434 1759 declare the above device complies with the requirements of the Federal Communications Commission.
This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received. including interference that may cause undesired operation.
Responsible Party: Michael Lieske
This device complies with Part 15 of the FCC rules, RSS-247 of In-novation, Science and Economic Development Canada (ISED). Ope-ration is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to this equipment not expressly approved by Sennheiser electronic Corp. may void FCC authorization to operate this equipment.
RE Radiation Exposure Information
Since the radiated output power of this device is far below the FCC / ISED radio frequency exposure limits, it is not subjected to routine RF exposure evaluation as per Section 2.1093 of the FCC rules and RSS-102 of ISED.
This device meets FCC/ ISED RF exposure guidelines for an uncontrolled environment. The transmitter of this device should be installed and operated at least 2″ (5 cm) away from the user’s body. Use of other accessories not verified by the manufacturer may not ensure compliance with FCC / ISED RF exposure guidelines. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark,
Germany www.sennheiser.com
Printed in China, Publ. 06/21, 580104/A04
