SENNHEISER HD 250BT Bluetooth Wireless Headphone
HD 250BT Compliance Information
Frequency band: 2400-2483.5 MHz
Transmit power: 10 mW (max)
The compliance marks are printed on the baffle, under the ear pads. To remove or replace the ear pads, please refer to the in Additional compliance information can be found in the supplied safety guide.
Country/Region Model: HD 250BT
- USA
- Canada
- Europe
- Australia
- South Korea
- China
- Singapore
- Brazil
- Taiwan
- Japan
FCC Supplier’s Declaration of Conformity (SDoC)
- FC SENNHEISER
- Model No: HD 2508T
We.
- Sennhelser Electronlc Corporation
- One Enterprise Drive Old Lyme
- CT 06371 USA
- Tel:+1 (860) 434 9190
- Fax: +1 (860) 434 1759
This declares the above device complies with the requirements of the Federal Communications Commission.
This device complies with Part 15 of the FCC rules. Operation Is subjected to the following two conditions
- This device may not cause harmful Interference, and
- This device must accept any Interference received, Including Interference that may cause undesired operation.
This device complies with Part 15 of the FCC rules, RSS-247 of Innovation, Science and Economic Development Canada (ISED). Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference recelved, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inteference by one or more of the following measures:
- Reorient or relocate the recelving antenna.
- Increase the separation between the equipment and recelver.
- Connect the equipment into an outlet on a circuit different from that to which the recelver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to this equipment not expressly approved by Sennheiser electronic Corp. may void FCC authorization to operate this equipment
RF Radiation Exposure Information
The product complies with the rules of FCC and ISED (RSS-102) for the portable RF expOsure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. This product is not subjected to FCC routine RF exposure evaluation per Section 2.1093 and RSS-102 of ISED.
Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Use of other accessories not verified by the manufacturer may not ensure compliance.
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
www.sennheiser.com
Publ. 09/20, 588584/A01
