LF-GIF020YFIIxxxxH EU Standard Flicker Free Built in Track Light LED Driver
Product Information:
The LF-GIF020YFIIxxxxH is a 14-20W isolated constant current
flicker-free LED driver. It is designed specifically for split-type
LED track lights and is not suitable for integrated track lights or
downlights. The driver has a built-in track light LED driver that
complies with EU standards. It operates at an ambient temperature
of up to 55°C and has an input voltage range of 220-240Vac. The
output voltage ranges from 30 to 40Vdc, and the output current
ranges from 350 to 500mA. The LF-GIF020YFIIxxxxH comes in two
versions: a full external casing version and a bare board + fixed
bottom casing version.
Product Usage Instructions:
- Ensure that the ambient temperature does not exceed 55°C during
operation. - Verify that the input voltage is within the range of
220-240Vac. - Connect the LF-GIF020YFIIxxxxH LED driver to the split-type LED
track light. - Make sure that the integrated track light or downlight is not
connected to the driver. - Select the appropriate output voltage and current settings
based on your specific LED track light requirements. - If using the full external casing version, install the driver
in a suitable enclosure to protect it from external elements. - If using the bare board + fixed bottom casing version, securely
mount the driver to a compatible mounting surface. - Follow any additional installation guidelines provided by the
track light manufacturer. - Ensure proper electrical connections are made according to the
manufacturer’s instructions.
LF-GIF020YFIIxxxxH EU-Standard Flicker-free Built-in Track Light LED Driver
Product Description
LF-GIF020YFIIxxxxH is a 14-20W isolated constant current flicker-free LED driver. It is suitable for split-type LED track light (any integrated track light or down light is forbidden) and its ambient temperature shall NOT exceed 55. Its input voltage ranges from 220 to 240Vac; output voltage range from 30 to 40Vdc and output current ranges from 350 to 500mA. It has 2 optional versions: full external casing version & bare board + fixed bottom casing version.
Features
– Suitable for Class II light fixtures – Ta: 55 – Modulation depth <0.5% – High efficiency; low THD – 5-year warranty (please refer to the warranty condition)
Applications
– Indoor office lighting – Decorative lighting – Commercial lighting – Residential lighting
Product Naming
LF – GIF 020 YF II xxxx H
H: input voltage of 220-240Vac xxxx: output current (e.g. 0500: 500mA) II: the 2nd gen. Y: complies with certifications; F: serial number 020: rated power: 20W G: isolated design; IF: indoor flicker-free series
1
www.lifud.com
Service Hotline: +86 755 8373 9299
LF-GIF020YFIIxxxxH EU-Standard Flicker-free Built-in Track Light LED Driver
Electrical Characteristics
Model
LF-GIF020YFIIxxxxH
Output Voltage
30-40Vdc
Output Current
350mA
400mA
450mA
Flicker Index <0.5%
(Modulation depth)
Output
CIE SVM
0.4
IEC-Pst
1
Current Tolerance ±5%
Temperature Drift ±10%
Start-up Time
<0.5S
AC Input Voltage 220-240Vac (limit: 200-264Vac)
Input Frequency 47Hz-63Hz
Input Current
0.13A max.
Power Factor
0.9
THD
20%
Input
Efficiency Inrush Current
85.5% 20A&150uS
86%
86.5%
Load Quantity Carried Circuit Breaker Model
B10
C10
by the Circuit Breaker
Quantity (pcs)
39
65
Leakage Current 0.7mA
Standby Power Consumption
<0.5W
Protection Characteristics
Open Circuit Protection
Short Circuit Protection
<55V Hiccup mode (auto-recovery)
500mA
87%
B16
C16
62
104
2
www.lifud.com
Service Hotline: +86 755 8373 9299
LF-GIF020YFIIxxxxH EU-Standard Flicker-free Built-in Track Light LED Driver
Operating Temperature
-30 – +55 & Tc 90
Environment Description
Operating Humidity 0-95%RH (no condensation)
Storage
-30 – +80 (six months under class I environment);
Temperature/Humidity 0-95%RH (no condensation)
Atmospheric Pressure 86kPa~106kPa
Certifications
TUV-ENEC, CE, CB, RCM, CCC
Withstanding Voltage I/P-O/P: 3.75kVac&5mA&60S
Insulation Resistance I/P-O/P: >100M@500Vdc
Safety & Electromagnetic Compatibility
Safety Standards
ENEC: EN61347-1: 2015, EN 61347-2-13: 2014/A1: 2017, EN 62384: 2016/A1: 2009; CE-LVD: EN 61347-2-13: 2014/A1: 2017, EN 61347-1: 2015, EN 62493: 2015; CB: IEC 61347-1: 2015, IEC61347-2-3: 2014, IEC 61347-2-13: 2014/AMD1: 2016; RCM: AS 61347.2-13:018 CCC: GB19510.1-2009, GB19510.14-2009
CE-EMC/RCM: EN55015, EN61000-3-2, EN61000-3-3 EMI
CCC:GB/T17743, GB17625.1, GB17625.2
EMS
CE-EMC/RCM: EN61000-4-2, 3, 4, 5 (lightning strike 1kV), 6, 11 CCC: GB/T17626.2, 3, 4, 5 (lightning strike 1kV), 6, 11
Others
IP Rating RoHS
IP20 RoHS 2.0 (EU) 2015/863
Warranty Condition 5 yrs (Tc<74)
Test Equipment
AC power source: CHROMA6530, digital power meter: CHROMA66202, Oscilloscope: Tektronix DPO3014, DC electronic load: M9712B, LED board, constant temperature and humidity chamber, lightning surge generator: Everfine EMS61000-5B, rapid group pulse generator: Everfine EMS61000-4A, spectroanalyzer: KH3935, hi-pot tester: TH9201B, flicker tester (flicker-free coefficient test) 60N-01, etc.
3
www.lifud.com
Service Hotline: +86 755 8373 9299
Remarks
LF-GIF020YFIIxxxxH EU-Standard Flicker-free Built-in Track Light LED Driver
1. It is recommended that customer should install overvoltage and undervoltage protection devices and surge protection devices in the power supply circuits of the light fixtures to ensure safety before connecting to electricity.
2. The PC cover, casing, end caps and other parts of the LED driver inside the LED light fixture must conform to UL94-V0 flammability standard or above.
3. As an accessory, the LED driver is not the only factor determining the EMC performance of the LED light fixture. The structure and the wiring of the light fixture are also relevant. Thus it’s strongly recommended the LED light fixture manufacturer should re-confirm the EMC of the whole LED light fixture.
4. The test conditions of the circuit breaker configuration quantity are the same as those of the inrush current test.
5. Do not install the driver inside the integrated track light or down light. 6. The ambient temperature (Ta) of the driver shall not exceed 55 and casing temperature
(Tc) not exceed 90. 7. Unless otherwise stated, the parameters above are test results under these conditions:
ambient temperature 25, humidity 50%, input voltage 230Vac/50Hz and 100% load. 8. The positioning hole on the bottom casing of driver is 3.5mm. It is well-advised to use the
screw with 5mm head diameter and M3 outer diameter when using the full external casing version; the screw with 6mm head diameter and M3 outer diameter when using the bare board + fixed bottom casing version. 9. Do not place the LED driver in the track head.
Characteristic Curves
PF Curve
Efficiency Curve
4
www.lifud.com
Service Hotline: +86 755 8373 9299
LF-GIF020YFIIxxxxH EU-Standard Flicker-free Built-in Track Light LED Driver
Lifetime Curve
Definitions of Terminals
INPUT
OUTPUT
AC-N(gray terminal) Input terminal of AC neutral wire LED+(red terminal) Positive electrode output of the driver
AC-L(gray terminal) Input terminal of AC live wire LED-(black terminal) Negative electrode output of the driver
Labels
Full external casing version
Bare board + fixed bottom casing version
5
www.lifud.com
Service Hotline: +86 755 8373 9299
LF-GIF020YFIIxxxxH EU-Standard Flicker-free Built-in Track Light LED Driver Structure & Dimensions (unit: mm)
Full external casing version
Packaging Specifications
Full external casing version
Bare board + fixed bottom casing version
Model Packaging Dimensions Quantities Weights
LF-GIF020YFIIxxxxH 385*285*210 mm (L*W*H) 14 pcs/layer; 7 layers/ctn; 98 pcs/ctn 0.056 kg±5%/pc; 6.5 kg±5%/ctn
Bare board + fixed bottom casing version
Model Packaging Dimensions Quantities Weights
LF-GIF020YFIIxxxxH 385*285*210 mm (L*W*H) 15 pcs/layer; 6 layers/ctn; 90 pcs/ctn 0.044 kg±5%/pc; 5.7 kg±5%/ctn
6
www.lifud.com
Service Hotline: +86 755 8373 9299
LF-GIF020YFIIxxxxH EU-Standard Flicker-free Built-in Track Light LED Driver
Transportation & Storage
Transportation Suitable transportation means: vehicles, boats and aircraft. During transportation, there should be awnings for rain protection and sun protection. Civilized loading and unloading are required. There should be no severe vibration or impact.
Storage Storage in accordance with the provisions of Class I environment. For products which have been stored for more than six months, they mustn’t be used until they pass the re-inspection.
Attention
Please use this product according to its specifications otherwise there may be malfunction. Use light fixtures that have not been certified or are not compatible with the LED drivers may cause fire or other
hazards. Man-made damage, any use beyond the specification and non-original-factory modification are not covered by
warranty.
Remark: The final interpretation right of the contents of this data sheet belongs to Lifud Technology Co., Ltd.
7
www.lifud.com
Service Hotline: +86 755 8373 9299
Lifud Technology Co., Ltd.
