MWBA1 Wall Board Adapter
Product Information
The Wall Board Adapter is a communication or data wiring
accessory designed for use in communication or data wiring
applications. It is intended for use only where local codes permit
and is not suitable for use with electronic wiring devices.
Part Numbers: MWBA1 INSTALLATION INSTRUCTIONS, PN99D
Product Usage Instructions
- Cut a hole in the drywall with the following dimensions: 3.75
inches (95.3mm) x 2.00 inches (50.8mm). - Ensure that the maximum drywall thickness is 0.75 inches
(19.1mm). - Avoid cutting the hole through any studs.
- Refer to the side view template for a visual representation of
the single gang adapter.
Contact Information
- For instructions in local languages and technical support,
visit: www.panduit.com/resources/install_maintain.asp - Email: [email protected]
- Phone: 866-405-6654
Revision: 06
© Panduit Corp. 2022
Wall Board Adapter
Part Numbers: MWBA1 INSTALLATION INSTRUCTIONS
PN99D
Designed for Communication or Data Wiring Applications USE ONLY WHERE LOCAL CODES PERMIT
NOT INTENDED FOR USE WITH ELECTRONIC WIRING DEVICES
SINGLE GANG ADAPTER (MWBA) 1. Cut a 3.75″ (95.3mm) x 2.00″ (50.8mm) hole in the drywall.
Maximum drywall thickness – 0.75″ (19.1mm). Avoid studs.
SIDE VIEW
TEMPLATE FOR SINGLE GANG
ADAPTER
For Instructions in Local Languages and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com Page 1 of 1
E-mail: [email protected]
Phone: 866-405-6654
Rev. 06
Panduit | Network Infrastructure and Industrial Electrical Wiring
