F110 Ride on Floor Scrubber
Product Information: F110 Ride-On Floor Scrubber
The F110 Ride-On Floor Scrubber is a machine designed to clean
large areas of floors efficiently. It has a control panel, clean
water tank, sewage tank, brush plate part, and water absorption
pickling system. The machine is equipped with a seat switch and an
electronic brake for safety and convenience. It has a theoretical
efficiency and maximum working duration. The battery type, brush
motor, suction motor, and net weight are also specified in the
technical parameters.
Product Usage Instructions
- Read the user manual carefully before operating the machine to
ensure safe and convenient use. The manual provides detailed
illustrations and instructions on how to use the machine. - Check the packing list to ensure that you have received all the
necessary items, including the user manual, warranty card, and
warranty hangtag. - Take note of the general remarks, warnings, and important notes
in the manual to avoid injury or damage to the machine and the
surrounding area. - Familiarize yourself with the control panel and its key
functions, including the automatic/stop seat, gas pedal/electronic
brake, dirty water outlet/flexible hose, vacuum hose, squeegee, and
adjustable soap pump. - Check the clean water tank and add water as needed. Mix it with
detergent before use. - Adjust the brush plate part to distribute clean water to the
ground and remove dirt from the floor. - Use the water absorption pickling system to recover sewage from
the ground. - Make sure to follow the wiring mode specified for the battery
box. - After use, clean the machine thoroughly and store it in a safe
place.
F110
F110 Ride-on floor scrubber user manual
Warning! Please read this instruction before use so that you can operate the machine safely and conveniently. This description will be of great help to the user for future maintenance. The user will not be harmed during the use and other items will not be damaged.So that the machine to get better maintenance. You must read this instruction carefully before using it. This instruction provides detailed illustrations.
F110
1 PAGE
CONTENTS
2. General Remarks………………………………………………………………………………………………………………….. 2 2.1.Contents of the Manual………………………………………………………………………………………………………..2 2.2.Packing list………………………………………………………………………………………………………………………….2 2.3.Machine identification……………………………………………………………………………………………………..3-4 3.technical information………………………………………………………………………………………………………………5 3.1.overview………………………………………………………………………………………………………………………………5 3.2.The main parts of machine………………………………………………………………………………………………….5 3.3.Hazardous area…………………………………………………………………………………………………………………..5 4.Safety……………………………………………………………………………………………………………………………………. 5 4.1.safety regulations…………………………………………………………………………………………………………….. 5-6 5.Operation and installation……………………………………………………………………………………………………….6 5.1.Transportation and lifting of machines (including packaging)…………………………………………………..6 5.2. Inspection of transport process ……………………………………………………………………………………………6 5.3. Packaging disassembly……………………………………………………………………………………………………….6 5.4. The battery………………………………………………………………………………………………………………………….6 5.4.1. Battery: Preparation…………………………………………………………………………………………………………..7 5.4.2. Battery: Installation and connection……………………………………………………………………………………7 5.5. Battery charger …………………………………………………………………………………………………………………..7 5.5.1. Choice of battery charger…………………………………………………………………………………………………..7 5.5.2. Preparation of charger………………………………………………………………………………………………………7 5.6. Machine transport and lifting………………………………………………………………………………………………..7 6. User Instructions…………………………………………………………………………………………………………………….8 6.1. Manipulation — Description………………………………………………………………………………………………..8 6.2. Installation and adjustment of water absorption gripper………………………………………………………..8 6.3. Installation and replacement of brushes/needle trays……………………………………………………………9 6.4. Detergent – Use method……………………………………………………………………………………………………..9 6.5. Preparation before work………………………………………………………………………………………………………9 6.6. Work of the machine……………………………………………………………………………………………………..9-10 7. Machine stops running for a long time…………………………………………………………………………………..10 8. Battery maintenance and charging ……………………………………………………………………………………….10 8.1. Use a built-in charger for charging……………………………………………………………………………………..10 8.2. Use external charger for charging………………………………………………………………………………………10 9. Machine maintenance instruction…………………………………………………………………………………………..11 9.1. Maintenance — Overview ………………………………………………………………………………………………….11 9.2. Routine maintenance………………………………………………………………………………………………………….11 9.3. Periodic maintenance…………………………………………………………………………………………………………11 10. Fault quick check and error code…………………………………………………………………………………………..11 10.1. How to solve possible problems ………………………………………………………………………………………..12 10.2. Alarm code………………………………………………………………………………………………………………………13 11. The product quality commitment…………………………………………………………………………………………..14
2 General Remarks
Please read this instruction carefully before performing any operation on the machine
2.1.Contents of the Manual
The manual is drafted by the manufacturer and written as a part of the machine as a whole. It contains all the specific requirements of the machine being produced.This manual contains the basic information that the user must have.Other documents are also described, which contain specific technical information on maintenance.Follow the manual to ensure the safety of operators and machines.At the same time, the machine running consumption is low, the cleaning effect is good and the working time is long.Failure to follow the manual can harm workers and machinery, damage the working ground, and even the environment.
Look at the table of contents in the front section of the manual for the fastest way to find specific topics.The following sections are not to be ignored, so be sure to note the bold text and graphic instructions below.
! Danger
It means you must be careful and understand the instructions carefully, or you may get injured or even die.
Important Note
Must pay attention to careful operation, to understand the instructions, otherwise it will cause a series of adverse consequences. Such as: damage the machine, damage the place where the machine is used, thus causing economic losses.
! Information
Operations requiring Special Attention Since the manufacturer will make necessary updates and improvements to the product, the manufacturer has the right to update the machine without any prior notice.The machine may be slightly different from the icon in the manual,
but the information and safety displayed in the manual can be guaranteed.
Technical parameters
Item
Name
1
The seat switch
2
The electronic brake
3
The noise
4
Machine sizes
5
Brush tray diameter
6
Wheel base
7
Squeegee width
8
Clean water tank capacity
9
Sewage tank capacity
10
Theoretical efficiency
11
Battery type
12
Brush motor
13
Suction motor
14
Net weight
15
Max Working Duration
Unit / /
dBA L×W×H Inch
Inch Inch Inch Gallon Gallon Ft²/Hour V/AH W W LBS
/
Parameter Standard Standard 67db 61×39×51 16×2 28 40 29 29 54896 4×6V/240 500W*2 400W 972 6.5H@ECO Mode
2.2. Packing list
1User manual 2 Warranty card 3 Warranty hangtag
2 PAGE
F110
2.3. User manual
1
3
control panel
2
Key
automatic/ stop Seat
gas pedal/ electronic brake
4
dirty water outlet/
flexible hose
vacuum hose
Squeegee
5
6
adjustable soap pump
3 PAGE
water cover of clean water tank cap Level indicator tube
Squeegee lift adjustment screw Brake release pole
2.3. User manual
7
8
Sewage tank
Sewage filter
Clean water filter
9
10
Clean water switch
11
+
positive pole
–
negative pole
+
positive pole
–
negative pole
–
negative pole
+
positive pole
–
negative pole
+
positive pole
cover brush/pad brush
battery overvoltage protection
4 PAGE
F110
3. Technical information
3.1. Overview
This machine is a fully automatic floor scrubber machine, which can be cleaned in residential or industrial environments, and can be self-activated to wash and dry the floor.The floor scrubber can automatically distribute detergent and clean water to the floor to clean and remove dirt.Choose the right cleaner and scrub brush.The machine has built-in water cleaning tank and sewage tank, which can complete the function of water absorption while washing the ground. The working principle of water absorption function is to use the water absorption motor installed in the sewage tank to form a vacuum water absorption device, and absorb the sewage on the ground and recycle it into the sewage tank through water absorption.
3.2. The main parts of machine
As shown in FIG. B:
1. Clean water tank (FIG.2, add water cover) : carry clean water and mix it with detergent; 2. Sewage tank (FIG. 3) : recovery of sewage and sewage outlet on the ground; 3. Control panel (FIG. 1);Introduce the meeting board in detail; 4. Brush plate part (FIG. 10) : the main component is the brush, which distributes clean water to the ground and then remove
dirt from the ground; 5. Water absorption pickling system (FIG. 3) : It is used to recover sewage from the ground. 6. Battery box (FIG. 11) : Mainly introduces the wiring mode.
3.3. Hazardous area
1 Water tank system: When using a certified detergent, avoid spills of detergent to the eyes, skin, etc.; Hazards arising from the collection of dirt from the environment (bacteria and chemicals);Removing the waste tank from the clean tank may cause a hazard
2 Control panel: Danger of short circuit. 3 Bottom of brush plate: Brush rotation can be dangerous. 4 Rear wheels: Rear wheels and underframe pose a risk of crushing. 5 Battery box: The electrode will cause a short circuit hazard, and gas will be generated when charging.
Pay attention to the installation wiring mode.
4 Safety
4.1. Safety regulations
Please read the “User manual” carefully before starting and using the machine, or before performing maintenance and operation.
Important Note
5 PAGE
Please strictly follow all instructions in this operation manual (especially the danger and warning section) and all safety warning labels on the airframe.The manufacturer shall not be liable for damage to persons or property resulting from violation of operating instructions.
The machine must be operated and used by trained personnel who must be familiar with the operation and trained. Minors are strictly prohibited from using the machine. The machine cannot be used for other purposes beyond the design scope.All safety standards and regulations must be strictly adhered to when used in special circumstances such as pharmaceuticals, hospitals, chemical industries, etc.The machine should not be used in dark and dark places, places prone to explosions, places where there are harmful substances to human body and inappropriate environments. The appropriate temperature of the machine is +4°C to +35°C. When the machine is at rest, the temperature is +0°C to +50°C. The machine cannot be used to absorb inflammable and explosive liquids (such as gasoline, fuel oil, etc.) when the atmospheric humidity of the machine is 30% to 95%.Flammable gases, dry dust, acid and soluble substances (e.g. soluble paint, propylene copper, etc.).Objects that do not absorb the heat of combustion. Do not operate on sloping surfaces or slopes with a gradient greater than 16%.If the machine is working on a small slope, do not use it crosswise. Be very careful and do not retreat.When driving along the slope, pay special attention to prevent the machine from toppling over, do not accelerate suddenly.When driving on the slope, the brush plate and suction grill must be raised. It is forbidden to park the machine on the slope at any time. When the motor of the machine does not stop running, the operator is forbidden to leave the machine. Before leaving the machine, switch the motor on and off Turn off and disconnect the power to make sure it doesn’t move suddenly.No matter where you are doing your work, please pay attention to the people and children present at your work site.Do not use the machine for transport or drag other objects. Do not drag the machine. Do not store anything above the machine. Do not block the ventilation and cooling areas. Do not move, modify or cover safety devices.
Experience has shown that sorting out personal belongings during work can lead to serious accidents.Before you start work, take off your jewelry, watch, tie, etc. Staff must wear and wear protective clothing and protective gear protective aprons/covers, non-slip waterproof shoes, rubber gloves, eye protectors Hoods and hats, earplugs, masks, etc.Do not place hands in moving parts. Do not use cleaning agents that do not comply with regulations. Use only in accordance with safety guidelines.We advise against exposing children to cleaners.In case of contact with eyes, rinse immediately with clean water.If inhalation occurs, contact your doctor immediately. Please make sure that the socket connecting to the battery charger power supply is properly connected and the protective switch is used. Make sure the plug is in line with the current/voltage supplied by the machine.The battery must be used in accordance with the guidelines of the battery manufacturer and local laws. The surface must be kept clean and dry to prevent surface leakage. Batteries must be kept away from metal dust.Do not leave any tools above the battery, it will easily cause battery short circuit and explosion.Strict safety guidelines must be followed when using acid batteries.Machines operating in high magnetic fields can easily cause electronic control systems to fail. It is strictly prohibited to spray and wash the machine directly with water gun.Waste water, detergent and so on recycled while the machine is working should be treated according to local laws.
If the machine is out of control due to any malfunction during operation, please shut down the machine immediately (unplug the main power supply), and then immediately contact the factory technician as soon as possible.All machine maintenance operations must be performed in an adequately lit area and the battery connection must be disconnected. All circuit parts and all maintenance operations must be performed by certified technicians.This machine can only use the accessories and spare parts provided by the original factory to ensure the safety and operation of the machine.Do not use spare parts that have been removed from other machines. The designed service life of the machine is 10 years. After the service life, no matter whether the machine continues to be used or not, the machine must be scrapped according to the local laws and regulations: the machine must be disconnected from all the power supply and drained out all the liquid and detergent; This product is a special waste of WEEE type and is applicable to the new environmental protection regulations.It must be separated from daily waste and sorted according to local laws..
Special waste. It must be treated separately from regular rubbish. The machine may be returned to the manufacturer for refurbishment.If the machine is no longer in use,
it is recommended that used batteries be sent to a certified disposal center for disposal. You must ensure that all harmful parts are handled safely and out of the reach of children.
5 Operation and installation
5.1. Transportation and lifting of machines (including packaging)
Important Note
During the lifting operation, the machine must be fixed safely to avoid the accident of turning over or falling.When using forklifts to transport machinery, it must be carried out in a well-lit environment.
The machine is fixed to the wooden floor by the manufacturer when leaving the factory. It must be loaded onto the transport vehicle with appropriate equipment (see EC Directive 89/392 and additional documents).Upon arrival at the destination, the equipment must be loaded and unloaded using the same machine. The absorbent pick of the machine is packed with plastic protective film.When using a forklift to move the machine, it must be operated together with the packing.During operation, care should be taken to avoid machine collision and overturning.
5.2. Inspection of transportation process
When receiving the machine, please check whether the machine and packing are damaged during transit.If any damage is found to the machine or packaging, please inform the shipper and fill out a claim for compensation.
5.3. Remove the packing
Important Note
When unpacking the machine, the operator must be equipped with the necessary tools (gloves, goggles, etc.) to minimize the occurrence of accidents.
Please follow these steps to remove the machine: * Use scissors and pliers to cut open the plastic tape * Remove the carton * Remove the metal supports for fixing the machine from the wood floor according to the machine model * Push the machine backward from the wooden floor using a ramp plate * Remove packaging for brushes and water-absorbent pickles * Clean the surface of the machine according to safety rules * After removing the machine, the battery can be installed. If possible, please take care of the removed packaging materials so that the
machine can be protected when it needs to be transported again or sent to the maintenance center for repair. Otherwise, please dispose of the packaging according to local laws.
! Danger
The above guidelines must be strictly observed, otherwise it may cause accidental injury and danger, and may result in the loss of warranty rights of the machine
5.4. The machine may be equipped with two types of batteries
AGM/Colloidal battery: this type of battery is maintenation-free. The parameters of the battery must be within the range specified in the technical specification of the machine. If the battery is too heavy, it will cause the machine to turn dangerously and the motor to overheat.If the battery capacity is too small, the machine will be charged more frequently. The battery must be kept charged regularly, the surface must be kept dry and clean, and the cable must be connected Make sure the connection is intact.
! Information
Please follow the following guidelines to set the machine according to the type of battery used.
Battery model: The jumper switch for battery type setting is located behind the control panel (FIG. N), please move the jumper to make the appropriate setting (ACID wet battery /GEL maint-free battery) according to the battery type selected.
6 PAGE
F110
5.4.1. Battery: Preparation
! Danger
During the installation or maintenance of any battery, the operator must prepare the necessary equipment (e.g., gloves, goggles, protective clothing…Etc.);To prevent the risk of accidents, keep away from the flame, prevent the electrodes of the short-connected battery, prevent sparks and do not smoke. Under normal circumstances, randomly provided batteries are acid, ready to use;If the supplied battery is a battery without water (without acid), the following steps must be followed before installing the battery to the machine: * Open the battery cap and add an acidic electrolyte (density between 1.27 and 1.29 kg 25° C) to each battery unit, making sure that
the metal plates are fully immersed in the solution; * Leave it idle for 4-5 hours to make the acidic electrolyte fully react with the electrode plate; * Check that the solution level is still above the metal plate;If not, fill the solution to the level; * Put the cap on the electric bottle; * Install the battery to the machine (according to the instructions below). Before using the machine for the first time, please charge the
battery according to the following steps.
5.4.2. Battery: Installation and connection
! Danger
Check that all switches on the control panel are in the “0” (off) position. Make sure that the battery wire connection is marked with a “+” terminal connected to the positive pole of the battery. It is strictly prohibited to check the battery in the presence of sparks. Please follow these steps carefully. A short circuit in the battery can cause an explosion. 1) Please ensure that the water in both tanks is drained (if necessary, please drain according to the relevant section). 2) Turn the sewage tank backward and rotate to 90°. Expose the battery tank. 3) Place the battery in the battery box.
Important Note
Please make sure that the weight of the installed battery is suitable for your machine. 4) Connect the battery wire according to the wiring diagram (FIG. 11). 5) Place the sewage tank in its normal working position 6) Please use the machine according to the following guidelines.
5.5. Battery charger
Important Note Do not discharge batteries excessively, as this can cause permanent damage.
5.5.1. Battery charger Selection Please ensure that the battery charger matches the installed battery: *lead-acid battery with water: it is recommended to use automatic charger * according to charger manufacturers and manual to choose. * AGM/gel battery: it is recommended to use a dedicated charger.
5.5.2. Preparation of charger If you are using a charger that is not supplied at random, you must use the supplied connector to install it on the charger. Please follow these steps to install the connector: 1.from battery charger cables (red and black) to remove the protective layer about 13 mm respectively; 2.insert the wire into the connector terminal, and then use pliers clamp; 3.will terminal according to the polarity (red + black line -) installed to the connector. * Connect the charger connector to the charging connector of the machine
5.6. Transportation and lifting of machinery
Important Note
All operations must be performed in a well-lit environment and must follow all safety guidelines.Operators must wear safety protective clothing. To pack and ship the machine, follow these steps: 1. Drain the two water tanks; 2. Remove absorbent gripper and brush (or baijie mat); 3. Remove the battery; 4. Place the machine on the wooden floor and fix it with metal bracket and packing belt; 5. Use the forklift to load the wooden floor (including the machine) onto the transport vehicle; 6. Fasten the machine and the wooden floor to the vehicle using the seat belt.
7 PAGE
6 User Instructions
6.1. Controls-describes the controls and panels of the machine
16
1
9
2
10
3
4
11
5
12
6
13
7
14
8
15
17 18
1. Water output indicator: The current water output indicator automatically adjusts the water output position by default, with 3 grids as the first gear, 5 grids as the second gear, and the full grid as the third gear (the maximum). The indicator light goes out completely and shows no water.
2. Water flow mode switch: press the button to manually adjust the water flow mode, press the button for 3 seconds to automatically adjust the water flow mode, and power on automatically adjust the water flow mode by default;
3. Water absorption function button: The water absorption motor and water absorption rake can be started and stopped separately; 4. Emergency stop switch; 5. Horn switch; 6. Front light switch; 7. Working state indicator of walking motor: When the indicator is on, the walking motor functions normally. When the indicator goes off
or flashes, the walking motor fails;(Make sure someone sits in the chair) 8. ECO button: Simply press on or off ECO Energy-saving mute mode; 9. Battery indicator: The full grid is 100% full, charging should be carried out when the remaining 3 grids are left; 10. Main brush pressure button: the default pressure is 1, and the main brush pressure can be adjusted according to cleaning requirements,
L:45Kg,M:60Kg,H:75Kg; 11. The knob for detergent gear: 0 for no detergent, mixing ratio 1:12 for gear 1, 1:64 for gear 2, 1:32 for gear 3; 12. One-click start button: press it once, and enable the function of floor washing and water absorption; 13. Forward and Backward switch key; 14. Speed limit knob: turn counterclockwise to reduce the driving maximum speed; turn clockwise to increase the driving maximum speed; 15. Brush loading/unloading button: press once to execute the brush loading action;Press for 3 seconds to discharge the brush. 16, timing display: display time, unit: hours; 17. Indicator light of water quantity in the water tank: when the water in the water tank is short, the indicator will always turn on. The
indicator will prompt error code. 18. Sewage tank water quantity indicator light: when the sewage tank is full of water, the indicator will always go on with error code, the
water absorption function will stop, and the indicator light will go out after sewage discharge;
6.2. Installation and adjustment of squeegee
Squeegee (FIG. 3) is used to drain sewage from the ground. Please follow the steps below to install water absorption gripper:
1) Please make sure the squeegee (FIG. 3) is in a reduced state. Put the water absorption gripper down.
2) Install the squeegee on the bracket (FIG.3)
3) Tighten the two fixed knobs (FIG.3)
4) Insert the suction pipe (As shown in FIG. 3) completely into the squeegee;Suction hose strips can scrape water and detergent
off the floor.In order to make water absorption effect more perfect, after a period of time, long-term friction with the ground will
make the edge of the rubber strip become blunt and become split, affect the effect of water absorption, so it is necessary to
replace the water absorption strip.Water suction strip must be checked frequently.
8 PAGE
F110
6.3. Installation and replacement of brushes/discs
Important Note It is strictly prohibited for the machine to work without a brush or needle tray.
Automatically install brush (or pin tray) 1. Push the floor brush or pin tray toward the center of the brush until the floor brush or pin tray is placed in the center
of the brush (FIG.10); 2. Press the brush installation and unloading button (control panel, Figure 15), and the floor brush will be installed
automatically.Press only once to execute the brush loading action;Or use the brush mounting plate to position the brush for installation, as shown in the figure below
locating plate
9 PAGE
fixed point
Refer to the fixed point for a total of 4 points (left and right direction) on the brush
Remove the brush (or pin tray) 1. Stop all service functions of the machine 2. Press the brush installation and unloading button (control panel, Figure 15) and hold for 3 seconds to perform brush
removal;The floor brush falls off automatically. Remove the floor brush.
6.4. Detergent-How to use it
Important Note
Dilute the detergent according to the manufacturer’s instructions, do not use bleach and oxidants (especially the high-concentration type), do not use fluxes and hydrocarbons,
do not use the detergent at a temperature beyond the specified range, do not contain sand and impurities.
This machine can only use low-foam cleaners specially designed for floor cleaners. Please contact the manufacturer for the latest and full detergent information.Please select the appropriate cleaner according to the condition of the floor and dirt. Please use the cleaner according to the relevant safe hand.
6.5. Preparation before work
Important Note
Before the machine starts to work, please wear protective clothing, hats, boots and so on according to the working environment, and wear mask to protect the respiratory system according to the advice of the detergent supplier
Please check the machine according to the following steps before work: 1. Check the battery power. If the battery is low, please charge it first; 2. Check whether the sewage tank (FIG. 3) is empty.If there is sewage, please drain it. 3. Add clean water and low-foam cleaner in proportion to the inlet on the left of the clean water tank (FIG. 2).Do not over fill the water,
and keep the water above 5 cm from the water inlet; 4. Select and install suitable brushes and clean pads according to the ground environment. 5. Please ensure that the suction hose is properly connected to the suction hose (FIG. 3) and the suction hose is in good condition.
! Information
If it is the first time for the operator to use the machine, please train in a wide space to use the machine. Please drain the water from the sewage tank before adding water to it.
In order to achieve the best cleaning effect and the longest service life of the machine, please use the machine according to the following simple rules: 1. Please tidy up your work area first and remove as many obstructions as possible. 2. Please try to work in less time so that the ground will not be contaminated again. 3. When cleaning, the machine should run as straight as possible 4. The large area to be cleaned is divided into several rectangular areas and cleaned separately. If necessary, use a mop or cloth to
clean corners.
6.6. Machine working Machine startup Prepare the machine as described below.
1. Turn the key switch (FIG. 1) to the “ON” position without stepping ON the accelerator pedal (FIG. 1), and check the battery power through the display (control panel).If the battery is low, turn the key switch back to the “OFF” position to charge the battery (see Chapter 8).
2. Use the shift switch (control panel) to select the walking direction of the machine. 3. Turn the steering wheel by hand and press down the accelerator pedal (FIG. 1), and the machine starts to move.
! Information
The seat (FIG. 1) is equipped with two safety induction switches that enable the machine to walk only when the operator is seated.
! Information
Start to work, control the steering wheel by hand, use the shift switch of the walking direction of the machine (FIG. 1) to select the walking direction, and then press the accelerator pedal (FIG. 1) to walk.
Important Note To prevent ground wear, avoid using brushes in situ.
Stop of machine
1. Release the foot pedal (FIG. 1). The machine is equipped with the electromagnetic brake system. When the foot pedal is fully released (FIG. 1), the electromagnetic brake braking will automatically take effect. Close the one-click start button to raise the brush lever and stop the main brush.
2. Turn the key switch (FIG. 1) to the “OFF” position.
Important Note Every time you need to add water to the water tank, please drain the water tank first.
Danger !
Operators should wear appropriate protective clothing.
When the sewage tank is full, the indicator light goes on (control panel).1) After a few seconds, the suction machine will automatically cut off the power. You must stop working and drain the sewage tank.
Sewage tank drainage: 1.Drive the machine to a position where drainage can be performed 2. Release the foot pedal (FIG. 1) and stop the machine 3. Use a drain pipe (FIG. 3) to discharge sewage.
Clear water tank drainage: 4. First, execute according to point 1-3. 5. Unscrew the drain cap (FIG.7) and drain out all the clean water after finishing the work every day.
Important Note
When cleaning the sewage tank, do not take out the filter (FIG. 7) and do not shoot directly at the filter with water.Now you can get back to work.
To push or drag a machine: When the machine fails or runs out of power and cannot walk, in order to push or drag the machine, the electronic brake control
lever on the walking wheel must be tightened (Figure 6), and the control lever must be relaxed after the drag line is completed.
Important Note
If the brake switch (FIG. 6) is not relaxed, the electronic brake system will fail. When the electronic brake system fails, it is strictly prohibited to
operate the machine.When the machine needs to be pushed or dragged, the brake switch needs to be operated (FIG.6).
7 The machine stopped running for a long time
If the machine is not in use within a long period of time, remove the squeegee and brush (pin tray), clean the machine and accessories, and store them in a dry place (preferably in a sealed plastic container).In addition, please ensure that the sewage and water tank inside clean.Battery model: Before the machine stops using for a long time, please fully charge the battery and then store it.During storage, the battery should be charged at least once every two months to prevent damage to the battery.
Important Note Batteries may be permanently damaged if they are not periodically charged.
8 Battery maintenance and charging
! Danger
During the installation or maintenance of any type of battery, the operator must prepare the necessary equipment (e.g., gloves, goggles, protective clothing…Etc.);To prevent the risk of accidents, keep away from the flame, do not short connect the battery electrode, do not generate sparks and do not smoke, and do not charge in a ventilated environment.
8.1. Use a charger for charging
(FIG.12, position. 8) Connect the charging cable to the connecting base (FIG.12). Turn on the charger
Important Note If using colloidal battery, charge according to the charger manual;
10 PAGE
F110
9 Machine maintenance instruction
! Danger
Be sure to disconnect the machine’s main power supply before performing any maintenance.Maintenance of all electrical parts must be carried out by certified and trained professionals and must comply with safety rules and instructions.
9.1. Maintenance – Overview
(FIG.12, position. 8) Connect the charging cable to the connecting base (FIG.12). Turn on the charger
According to the manufacturer’s guidelines for routine maintenance to help the machine to obtain the best performance and prolong the life of the machine each cleaning machine please follow the following steps:
1. Use water spraying device carefully. Water spraying device may easily allow water to enter circuit board and motor, resulting in short circuit or machine damage.
2. Do not use fluxes and hydrocarbons, which may cause damage to rubber parts.
9.2. Routine maintenance
9.2.1 Filter screen and float ball sensor of water absorption motor: clean 1. Open the upper cover of the water tank on the sewage tank (FIG. 7); 2. Drain the sewage from the sewage tank; 3. Take out the filter;
4. Clean the filter screen with clean water or detergent; 5. Reinstall the filter. 6. Close the lid of the sewage tank.
9.2.2 Clean water tank filter: Clean 1. Close the outlet valve before cleaning the filter (FIG. 9). 2. Screw out the outer cover of the filter (FIG. 8); 3. Pull down the filter;
4. Clean the filter screen with clean water or detergent; 5. Reinstall the filter on the bracket 6. Reinstall the filter cover
9.2.3 Water absorption scraping tape: Water absorbent tape is installed on the water absorbent pick, used to stick to the ground to recover sewage and detergent.After using for a period of time, the rubber strip will wear because of friction, thus affecting the water absorption effect, so please check the condition of the rubber strip frequently.
Flip or replace the adhesive tape:
1. Unscrew the two fixed knobs (FIG. 3 Position of water absorption gripper) and remove the water absorption gripper from the bracket
2. Remove the vacuum tube from the suction scraper (FIG. 3, vacuum tube);
3. Remove left and right retaining nuts 4. Remove the adhesive tape retaining clip 5. Remove the tape 6. Turn over the rubber strip until the four sides of the rubber strip are
worn away, or replace the new rubber strip; 7. Reinstall the adhesive tape retaining clip and retaining nut
9.3. Periodic maintenance
9.3.1. Daily maintenance After each day’s working, please follow the following guidelines for maintenance: 1. Drain the sewage from the sewage tank; 2. Clean and check the condition of the water-absorbing strip, and replace it if necessary. 3. Check whether the suction outlet of the suction grill is blocked. If necessary, please clear the blockage; 4. Charge the battery according to the instructions.
9.3.2. Weekly maintenance
Clean the sewage tank and switch the ball float to ensure the normal operation; 1. Clean the filter of water absorption motor and check whether there is damage;Please replace it if necessary. 2. Clean the filter screen on the left side of the clean water tank and check whether it is damaged (FIG.8);Please replace it if necessary. 3. Clean the suction pipe. 4. Clean the water tank and sewage tank. 5. Check the battery capa
9.3.3. Semi-annual maintenance Ask professional technical personnel to test the circuit system of the machine.
11 PAGE
10 Fault quick check and error code
10.1. Trouble Shooting Form
Trouble
Malfunction Caus
Solutions
The machine doesn’t work
The battery is not connected The battery is run oute
The emergency button was pressed
Install the battery in the machine Charge the battery
Release the emergency button (figure Panel)
Didn’t press the brush switch
Press the brush switch
The sewage tank is full
Empty the sewage tank
The floor doesn’t turn
Brush motor fuse burns out
Check and replace the fuse
Run out of battery
Charge the battery
Motor fault
Replace the motor
Poor cleaning effect
Brush or pads are worn
Replacement
The outlet valve (FIG. 8) is closed
Open the outlet valve
no water coming out
The water in the water tank is insufficient
Fill the tank with water
Outlet pipe blocked
Remove the plug
Solenoid valve blocked
Check solenoid valve
The water cannot stop
Damage of solenoid valve
Replace solenoid valve
Solenoid valve circuit fault
Check solenoid valve circuit
No water during operation
Solenoid valve blocked Damage of solenoid valve Solenoid valve circuit fault
Check solenoid valve Replace solenoid valve Check solenoid valve circuit
The suction motor cannot be started
No power supply or motor failure of the suction moto
The sewage tank is fullr
Please check whether the power cable is properly connected,if in the latter case, please replace the motor
Empty the sewage tank
The absorbent strip has worn away
Replacement
The suction pipe or suction outlet is blocked or damaged
Remove the plug or replace the suction pipe
Poor water absorption effect
The ball float should be switched off or filled Suction pipe plug
The suction pipe is not connected or damaged
Empty the tank or replace the float switch Remove the plug
Connect or replace the suction pipe
No power supply or motor failure of
Please check whether the power cable is properly
the suction motor
connected, if in the latter case, please replace the motor
Run out of battery
Charge the battery
Machines can’t walk
There may be a problem with the walk control
Please refer
The emergency button was pressed
Release the emergency button
Machine can’t brake
The control lever of the electronic brake system is locked (FIG.6) Electronic braking system failure
Loosen the control nut (FIG. 6) replacement
Battery life is shorter than normal
Electrodes and wiring terminals are oxidized or dirty The battery charger is not working properly
Clean and apply vaseline to electrodes and terminals on Check the charger instructions
The battery is new, but does not
New batteries usually require 20-30 recharges to
The battery is normally fully charged, but only for a short period of time
provide 100% performance The machine needs constant use and the battery capacity is insufficient
get the best results Replace a large capacity battery or use another
set of charged batteries
The battery charger is not working
Recharge
12 PAGE
F110
10.2. Alarm code
Code
Fault/status information
E00
Battery under voltage
E01 The mainboard overtemperature
E02
A hardware failure
E03
Clean water tank is empty
E04
Sewage tank is full
E05
Accelerator pedal failure
E06
Do not turn off the power when charging
protections downtime downtime downtime Delay shutdown of main brush motor Water absorption motor delay stop downtime downtime
instructions Unrecoverable, need to shut down to clear
recoverable The controller needs to be returned to the factory for repair
It will be restored with clean water Recovery after drainage of sewage There is a short circuit in the hall sensor of the gas pedal, and the gas pedal needs to be repaired Close the electric door lock to stop alarm, should be charged according to the normal charging steps: that is, turn off the power and then connect the charger to charge
E10 Main brush lift motor malfunction
downtime
E11
Main brush motor overload
downtime
E12 Short circuit of main brush motor
downtime
E13
Brush over temperature
E14
Limit switch of main brush push rod is out of order
E20
Water suction lift motor fault
downtime downtime downtime
E21 Water absorption motor overload
downtime
E22
Short circuit of suction motor
downtime
E23
Suction overtemperature
E24
Failure of limit switch of suction scraper
E30
Discharge solenoid valve malfunctioning
E31
Buzzer failure
downtime downtime downtime downtime
E32
Pump failure
downtime
E33
Detergent pump failure
downtime
E34
Lack of detergent
Detergent pump shutdown
The main brush lifting motor has a fault or the main board main brush lifting motor driver has a fault
Unrecoverable, need to shut down to clear Unrecoverable, need to shut down to clear
recoverable Recoverable, two limit switches are all connected when the fault, disconnect any recovery There is a fault with the water-absorbing gripper motor or a driver fault with the water-absorbing gripper motor on the main board Unrecoverable, need to shut down to clear Unrecoverable, need to shut down to clear
recoverable Recoverable, two limit switches are all connected
when the fault, disconnect any recovery Unrecoverable, need to shut down to clear Unrecoverable, need to shut down to clear Unrecoverable, need to shut down to clear Unrecoverable, need to shut down to clear
Restore the detergent after filling
Clib
Climbing a prompt
Lift the main brush and suction rake push rod, main brush and
suction motor stop working
After the machine arrives at the flat ground, press the start button or the suction button to start the corresponding function
SEAt
Seat switch off
Shut down, no beeping sound
recoverable
13 PAGE
11. The product quality commitment
All products are carefully tested and inspected by factory quality inspectors to ensure that the products are free of defects in parts and assembly when they leave the factory.
We provide a one-year warranty for the product (except for vulnerable parts or man-made damage), regular return visits during the warranty period, all repair costs and accessories costs caused by product quality problems are borne by the seller. Or after-sales service by local dealers Contact us.
Note: This warranty does not apply to any accidents caused by maintenance, negligence, abuse, product damage caused by fire, or operation of the machine not in accordance with the operating requirements.
In addition, wearing parts (wheels, rubber strips, absorbent strips, brush trays, needle holders) are not covered by the warranty. The storage battery is a special commodity, which is related to the standard use of the operators. The warranty period is 6 months. If the product is used for other purposes than the product function, the warranty is invalid. Please read the product manual and maintenance manual carefully. All communication and transportation costs, including insurance costs, are paid by the user. Does not include other claims of any nature.
14 PAGE
ekat.com - Dichtungen, Schläuche, Gummi und Kunststoff
