Aopen 34hc5cur Hc5 Series 34 Inch Curved Gaming Lcd Monitor User Manual

AOPEN 34HC5CUR HC5 Series 34 Inch Curved Gaming LCD Monitor

Important safety instructions

Please read the following instructions carefully.

1. Cleaning the LCD display screen: first, ensure that the power adapter you are using matches electrical standards for your region.
   • Turn off the LCD monitor and unplug the power adapter.
   • Spray a solvent-free cleaning solution onto your rag and gently wipe the screen.
   • Never spill any liquid directly onto or into the screen or its case.
   • Do not use any ammonia- or alcohol-based cleaners on the LCD monitor screen or case.
   • AOPEN will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
2.  Do not place the LCD display near a window. Exposure to rain, moisture, or direct sunlight can cause serious damage to the device.
3. Do not press on the LCD screen. Excessively forceful pressing can cause permanent damage to the display.
4.  Do not remove the case or attempt to repair the machine by yourself. All maintenance tasks should be performed by an authorized technician.
5. Store the LCD display in a room with a temperature between -20°C-60°C (-4°F-140°F). Permanent damage may result if the LCD display is stored outside of this range.
6. Unplug the monitor’s power adapter immediately and contact an authorized technician if:
   • The signal cable between the monitor and the computer is worn or damaged.
   • Liquid spills onto the LCD display or the display is exposed to rain.
   • The LCD monitor or case is damaged.

Attaching the monitor base

1. Unpack the monitor base and place the base on a smooth work surface.
2. Unpack the monitor.
3. Attach the monitor stand arm to the base.
   • Make sure the base snaps into the monitor stand arm. (Selected models only)
   • Use a screwdriver to turn the black screw to secure the arm to the display. (Selected models only)

Connecting Your Monitor to a Computer

External control

Regulatory and safety statements

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is installed in a residential area. Thia equipment generates, uses. and can radiate radio frequency energy, and if not installed and used in accordance with instructions, may cause interferenGe to radio communications.

However, there is no guarantee that interference will not occur in a specific installation. If the device does cause interference to radio or television reception (which can be determined by the switchgear), it is recommended that the user take one or more of the following measures to eliminate the interference:

• Readjust the direction or position of the receiver antenna.
• Increase the distance between the device and the receiver.
• Connect the device power to a power outlet that is different frorn the circuit to which the receiver is oonnectad.
• Contact your retailer or an experienced radio/TV technician for help.

Note
lo prevent damage to the monitor, do not lift the monitor u•ing the stand.
Note: shielded cable
All connections to other computing devices must be through shielded cables to comply with EMC regulations.

Note: peripherals
Only certified peripherals (input/output devices, terminals, printers, etc.) that meet Class B limits should be connected to the device. Using uncerti’Hed peripherals may cause interference to radio and television reception.

Note
Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this product

Operating conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1) th18 device may not cause harmful interference, and (2) this device must be able to accept any interference received, including interference that may cause undesired operation.

Note: Canadian users
This Class B digital device complies with Canadian ICES-003 specications.
Remarque • l’intantion des utili•ateurs canadiens
Cat appareil numrique de la classe B est conforme ii la norme NMB-003 du Canada

Explanatory note on “Regulations on the Management of Waste Electrical and Electronic Products Recycling and Disposal”
To better care for and protect our planet, when the user no longer needs this product or the product end of life, please comply with national laws and regulations on the recycling of electrical and electronic product waste, and recycle it through local manufacturers with nationally recognized recyclinQ qualifications.

Abandonment of waste equipment for EU household users
I his oymbol on the product or on its packaging indicate, that the product must not be disposed of with other household waste. When disposing of used devices, it is your responsibility to bring it toe collection point that recycles used electrical end electronic equipment. The separate collection end recycling of uaed devices et the time of diapooal helps to conseive natural resources end ensures that they are recycled in a manner that protects human health and the environment For more information about recycling points for uaed devices, please contact your local city office, household waste disposal service, or the shop where you purcha,ed the product

CE declaration of conformity
Hereby, AOPEN Smartview Inc., declares that this LCD monitor is in compliance with the essential requirements end other relevant provisions of EMC Directive 2014/30/EU, I ow Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product
AOPEN monitor ia purposed for video and visual display of information obtained from electronic devices.

SPECIFICATION

Find manuals and other documents for your AOPEN product on the official AOPEN support website.