Reflying Rst69 Magspeed 3-in-1 Wireless 15w Charging Station User Manual

MagSpeed 3-in-1
Wireless 15W Charging Station
Model: RST69
USER MANUAL

Attaching the Ring

For devices other than iPhone 12 series and above, apply the metal attachment ring to the outside of your phone case using the included applicator guide. Metal attachment ring is to be applied directly on the outside of phone cases only.

1. Place the guide over the back of your phone. Align your phone vertically so that each edge matches the same number on both sides.
2. Align your phone horizontally so that each edge matches the same letter on both sides.
3. If there are no obstructions, peel the protective layer from the metal attachment ring, and apply them to your phone case using the applicator guide.

Charge Your Device Wirelessly

Connect the included USB-C cable to the included wall charger, and the other end to the USB-C input (A). Place your wireless charging device on the magnetic wireless output (B). Your device should begin to wirelessly charge. To achieve fast charging, ensure you are using a charger that is capable of fast charging. Some cases may interfere with wireless charging if they contain metallic material or are overly thick.

Charge your AirPods

Place your AirPods wireless charging case on the wireless output 2 (C). Your AirPods should begin to wirelessly charge. See below for indicator light (D) statuses for the wireless output 2 (C).

Charge Your Apple Watch
Place your Apple Watch on the wireless output 3 (D). Your Apple Watch should begin to wirelessly charge

Product Specifications

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
41J this device may not cause harmful interference, and (2) this device must accept any interference received. Including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to protect reasonably against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there Is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment of and on. the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• IncreaSe the Separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposit° benefits set forth for an uncontrolled environment This equipment should be totaled and operated with a minimum distance of 20cm between the radiator and your body.
Responsible Party – U.S. Contact Information
EU Declaration of Conformity
Hereby. Shenzhen Relying Electronic Co.. Ltd desires that this product is in compliance with Directive 2014531EU. The full text of the EU declaration of conformity is available at the fob: ming intemet address by clicking on the Compliance Documentation link at www.reflying.com

References

• www.reflying.com