22SV23302 Trumpeting Nutcracker Holiday Yard Decoration
Product Information
The product is a Trumpeting Nutcracker with LifeEyes. It comes
with various parts, including a base, platform, poles, boots, legs,
body, head, arms, beard, horn pipe, horn bell, caps, hex key,
screws, and an adapter. The input power requirement is 120VAC
50/60Hz, and the output is 5.9V 1.5A.
Product Usage Instructions
- Check all the parts listed in the manual. If any part is
missing or broken, do not attempt to assemble the product. Contact
SVI Customer Service or Home Accents Holiday Customer Service for
assistance. - Assemble the product in the following order:
- Place the base (A) on a stable surface.
- Attach the platform (B) to the base (A).
- Insert the lower poles (C) into the platform (B).
- Attach the left boot (D) and right boot (E) to the lower poles
(C). - Insert the upper poles (F) into the lower poles (C).
- Attach the left leg (G) and right leg (H) to the upper poles
(F). - Attach the body (I) to the upper poles (F). Adjust the upper
poles (F) if necessary for proper alignment. - Attach the head (J) to the body (I) by inserting the bottom
part of the head (J) into the top of the body (I) and rotating
counterclockwise to lock it in place. Be careful not to pinch the
wires. - Attach the right arm (K) and left arm (L) to the body (I).
- Insert the horn pipe (N) through the hands of the arms (K, L).
Insert screws provided and rotate them clockwise to secure the horn
pipe (N). - Slide the beard (M) onto the horn pipe (N) and connect the
cables between the head (J) and horn pipe (N). - Connect the adapter (S) to the product.
- Ensure all connections are secure and aligned properly.
- Plug the power adapter into a standard power outlet.
- Adjust the settings on the function control box located on the
body (I) as desired. - To change the LED effects on the Nutcracker Horn, press the LED
Mode button on the function control box. There are 4 LED effect
settings to cycle through: Fade On/Off, Rotating Flash, Rapid
Rotating Flash, and Rapid Flash. - The Trumpeting Nutcracker with LifeEyes is now fully assembled
and ready to use. Enjoy!
Note: Ensure that the waterproof cap is covering the Try Me
receiver at all times when not in use.
USA/ États-Unis/ YOW 1007485837
EASY ASSEMBLY AND OPERATION INSTRUCTIONS
22SV23302_Trumpeting Nutcracker
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IF ANY PART IS MISSING OR BROKEN, DO NOT ATTEMPT TO ASSEMBLE THE PRODUCT AND CONTACT SVI CUSTOMER SERVICE FROM 8:30 AM TO 5:30 PM PST AT 1-855-428-3921, EMAIL [email protected], OR CALL HOME ACCENTS HOLIDAY CUSTOMER SERVICE FROM MON-FRI 8:00 AM TO 7:00 PM AND SAT 9:00 AM TO 6:00 PM EST AT 1-855-HDHOLIDAY (1-855-434-6543).
IMPORTANT TIPS: · Ensure that the item’s adapter is plugged in at the function control box and in the
wall. · Ensure that the switch on the function control box is on the desired setting. · If not functioning properly (LEDs don’t light up, LCD eyes don’t activate), ensure
that cables are connected correctly, according to the instruction sheet. · Ensure that the floor or surface that the item sits on is flat and level.
· Ensure that the volume is not all the way down. · If the item still does not work, contact SVI Customer Service from 8:30 am to
5:30 pm PST at 1-855-428-3921, email [email protected], or call Home Accents Holiday Customer Service from Mon-Fri 8:00 am to 7:00 pm and Sat 9:00 am to 6:00 pm EST at 1-855-HDHOLIDAY (1-855-434-6543).
PARTS LIST
A. Base x 1 B. Platform x 1 C. Lower Poles x 2 D. Left Boot x 1 E. Right Boot x 1 F. Upper Poles x 2 G. Left Leg x 1 H. Right Leg x 1 I. Body x 1 J. Head x 1 K. Right Arm x 1 L. Left Arm x 1 M. Beard x 1 N. Horn Pipe x 1 O. Horn Bell x 1 P. Caps x 2 Q. Hex Key x 1 R. Screws x 2 S. Adapter x 1
Input: 120VAC 50/60Hz Output: 5.9V 1.5A
A
B
C
D
E
F
G
H
I
J
K
L
M N
S
O
P
Q
R
Locking Pin
FRONT
LEFT
Click Means It’s Locked
FRONT
RIGHT
BACK
BACK
B
C C
BACK
RIGHT
A
LEFT
FRONT
NOTE: Throughout the instructions, Right
and Left are relative to the character.
The quick connect push buttons on the (A)
A
Base aim towards the back as shown in
Figure 1.1.
1.1
A B
1.2
D
C C
E
F
F
E
D
B 2.1
2.2
1/3
NOTE: If there is
difficulty in
assembling the (I)
Body, try adjusting
the (F) Upper
Poles until they
I
G
are properly
aligned.
Cable pairs are color-coded to ensure proper color-matching connections.
NOTE: A ladder is advised for assembling the (J) Head. Insert the bottom part of the (J) Head into the top of the (I) Body and rotate counterclockwise so the (J) Head locks in place. Do not pinch wires while assembling the (J) Head to the (I) Body.
H
E
D
HG
3.1
3.2
L
I
L
I
I
K K
I
I
I
L K
5.1
N L
NOTE: The screw must align properly with
the grooved section of the shoulder on the
(I) Body. Do not overtighten screws.
5.2
NOTE: Push the (N) NOTE: Lift up the (L, K) Arms. Tuck the
Horn Pipe through the K hands of the (K, L)
Arms. When in place, insert the screws by 1 rotating them clockwise. Do not
excess cables into the mouth of the (J) Head and push the (N) Horn Pipe into the mouth of the (J) Head as well.
Slide the (M) Beard onto the (N) Horn Pipe and connect the cables between the (J) Head and (N) Horn Pipe.
overtighten the screw.
M
Q
R 2
N
5.3
5.4
J
I
J M
I J
M I
J I
4.1
6.1
6.2
I
NOTE: When
plugging the
adapter into the
Trumpeting
P
P
Nutcracker with
LifeEyes, ensure
that the cap on
the adapter
cable is rotated
clockwise until
firmly in place
6.3 as shown.
ADAPTER
6.4
2/3
YOUR TRUMPETING NUTCRACKER WITH LIFEEYES IS NOW FULLY ASSEMBLED. PLUG IN AND TURN ON TO LET THE FUN BEGIN!
NOTE: Make sure the waterproof cap is covering the Try Me receiver at all times when not in use.
LED Mode
8.1
OPERATION INSTRUCTIONS:
1. Plug the power adapter into a standard power outlet and adjust the settings on the function control box, located on the Body, as desired.
2. Settings:
LED Mode
This button will change the LED effects on the Nutcracker Horn. There are 4 LED effect settings to cycle through; Fade On/Off, Rotating Flash, Rapid Rotating Flash, and Rapid Flash.
ON / Marche OFF / Arrêt
This button will activate/deactive the lights, sound, and LCD eye animation of the Nutcracker. The Nutcracker will play over 20 minutes of Christmas music and then will repeat the song selection indefinitely until deactivated.
Try Me / Essaie-moi
When the Try Me jack is plugged in and the ON/OFF button is toggled to “ON,” the product will automatically enter “Try Me Mode.” This mode will deactivate the lights, sound, and LCD eye animation until triggered by using a Step Here Try Me Activation Pad (Not Included). The item will operate for one audio cycle with each Try Me activation.
Raise or lower the volume using the volume control turn dial, turn all the way down to turn the volume off.
WARNING:
· Lay product down before a storm or strong winds. · Don’t climb or pull on product. · Don’t add to or modify product. · Assemble and place the product on level surfaces only. · Don’t push or tilt product.
WARNING
This item is not a toy and should be used for decoration only. This item contains small parts that can be a choking hazard. Keep all plastic and wire parts away from children. 1. Please use the adapter supplied by manufacturer. 2. Please assemble item according to instructions. Connect all wires according to matching color. 3. Children should be supervised by adults. Item should not be grabbed, as it becomes a tipping
hazard. Keep flammables away from the adapter, as it heats up during operation. Please view all instructions carefully before assembling. Save this instruction sheet for future reference.
CARE AND STORAGE INSTRUCTIONS
This is both an outdoor and indoor use item. When not in use, store this product in its original packing. Keep away from heat and moisture.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving
antenna, Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or experienced
radio/TV technician for help.
CAN ICES-003(B)/NMB-003(B)
TWO ADULTS RECOMMENDED FOR
ASSEMBLY
DO NOT MOVE AFTER FULLY ASSEMBLED
IF EYES, LIGHTS, OR SOUNDS DO NOT WORK
1-855-HDHOLIDAY (1-855-434-6543)
DO NOT
DISPLAY DURING
LED Mode
STRONG WINDS
© Seasonal Visions International Emeryville, CA 94608 Tel: 1-855-428-3921 All Rights Reserved MADE IN CHINA
3/3
