Bluestone Eb1 Ubuds Bluetooth Earbuds User Manual

EBl
Bluetooth Earbuds

User Manual

PRODUCT OVERVIEW

Making and receiving calls

Answer call	Press
Enda call	Press
Reject call	Press and hold for2 seconds
Redial the last call	Quickly press 2 times

Listening to music

Play music	Press
Pause/resume music	Press
Go to the next song	Press and hold
Go to the previous song	Press and hold
Power oN/Off	Press and hold
Changing the Volume-	Press or

SPECIFICATIONS

CHARGING THE EARBUDS

• These earbuds have an internal rechargeable battery.
• The battery must be fully charged prior to use.
• Charging time is approximately 1 hr.
• Your earbuds cannot be used while being charged

Using the provided Micro USB cable:

1. Connect the Micro USB Cable to the Micro USB Port on the side of the Controller
2. Connect the USB cable to your USB Port

PAIRING THE EARBUDS TO YOUR BLUETOOTH DEVICE

1. Enable the Bluetooth function on your device
2. Keep the earbuds within 3 feet of your Bluetooth device. (While pairing only)
3. Turn on the Bluetooth headphones by pressing the multifunction button for 1 second.
   (The sound “Power ON” will play through the earbuds while the indicator light flashes.)
4. Use your device’s Bluetooth interface to search for the earbuds.
5. After approximately 2 seconds “Bluestone EB1” will appear on your device’s list of pairable signals.
6. Select “Bluestone EBI” from the list.
   (The sound “Pairing” will play through the earbuds while the indicator light flashes.)
7. After a successful connection, the earbud’s indicator light will flash once every 8 seconds

FAO

• In order to save power, the earbuds will automatically switch off if no device connection is made within 1 O minutes
• Make sure your device is fully charged before using it for the first time. Your device can not be turned on if the battery level is very low
• Check the connection between your device with phone or computer. If the connection is not established, please reconnect again. And adjust the volume level to a suitable level

IMPORTANT SAFEGUARDS

• Do not use this unit for anything other than its intended use
• Keep the unit away from the heat source, direct sunlight, humidity, water, or any other liquid.
• Do not expose the device to extremely high or low temperatures, as it may damage the battery
• Do not operate the unit if it has been wet or moist to prevent electric shock and/or injury to yourself and damage to the unit
• Do not use the unit if it has been dropped or damaged in any way
• Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• Keep the unit out of reach of children
• This unit is not a toy.

BATTERY DISPOSAL·
This product contains a lithium polymer battery. Lithium polymer batteries are environmentally safe when fully discharged. Please refer to your local and state laws for battery disposal procedures

©SM TEK GROUP INC, All rights reserved.
BlueStone is a trademark of SM TEK GROUP INC.
New York, NY 10001
www.smtekgroup.com
1 Year Limited Warranty
Please Email [email protected]
Made in China