Ensto Hj33.2403ctt Heat Shrink Joint Kits Instruction Manual

PEM-HJ33_2403CTT
2021-10-19
Revision B

HJ33.2403CTT

HJ33.2403CTT Heat Shrink Joint Kits

U/U (U) kV	mm2	mm2
12/20 (24) kV	95-150	95-240
6/10 (12) kV	95-150	95-240

PEM-HJ33_2403CTT
Revision B 2021-10-19

LEGAL NOTICE

• The product must be installed only by a competent person with sufficient training in installation practices and with sufficient knowledge of good safety and installation practices in respect of electrical equipment. If local legislation contains provisions in respect of such training or sufficient knowledge in respect of the installation of
  electrical equipment such provisions shall be fulfilled by the said person.
• Ensto accepts no liability concerning claims resulting from misuse, incorrect installation, or ignored national safety regulations or other national provisions.
• WARNING: Failure to follow the installation instructions may result in damage to the product and serious or fatal injury.

	CPEEPLI40-42 1030 mm	1		PEE64 1/600	2
	CPEEPLI30-36 700 mm	1		PEE64,3S0	1
	SIST20 460 mm	3		CTI 40	6
	SJSCT47 420 mm	3		PA23	2
	A1F264 1600 mm	1		PEE22SW	1
	CA240584	3		PEM-H133_2403CTT	1
	51.J1.27	1
	STCTA49.10	2
	SSCTA85.10	3
	55CTA135.1 100 mm	6
	55M83.3 lx360mm	9

1. 
2. 
3. 
4. 
5. 
6. 
7. 

8. 	mm	mm²	mm²	mm²	mm	mm²		mm
   CA240SB4	7.7-19.2	50-240	90° 50-150 120° 50-120	90° 50-185 120° 50-150	60	50-95	120-150	d=21/L= >26

   

9. 

PEM-HJ33_2403C