Flat Sx Series Auto-adjusting Table Bases Instruction Manual

SX Series Auto-Adjusting Table Bases

Product Information: SX Series Assembly Instructions

The SX Series is a product that requires assembly. The package
includes various parts labeled as A, B, C, D, E, F, G, H, I, J, K,
and L. The assembly instructions are provided in this manual.

Parts List:

• A – 1x
• B – 1x
• C – 1x
• D – 1x
• E – 1x
• F – 1x
• G – 2x
• H – 4x
• I – 4x
• J – 1x
• K – 1x
• L – 1x

The assembly instructions are organized in a sequential order
and include diagrams for reference. Please follow the instructions
carefully to ensure proper assembly of the product.

Product Usage Instructions:

1. Start the assembly by identifying all the parts listed
   above.
2. Refer to the diagram in the manual and start assembling the
   parts in the order mentioned.
3. Make sure to use the recommended torque of 20N.m / 15lb.ft for
   tightening the screws and bolts. Do NOT overtighten.
4. If the package includes post weights, please refer to
   instruction AI0004 for post weight assembly.
5. Once the assembly is complete, place the table top on the
   assembled product and secure it in place using screws or
   bolts.
6. The product is now ready to use. Place it in the desired
   location and start using it.

For any further assistance or queries, please refer to the
product manual or contact our customer support team.

A 1X
1

B 1X
B

ASSEMBLY INSTRUCTIONS SX SERIES

C 1X
2 E G

D 1X

E 1X F 1X

H 4X

G 2X

3

I 4X J 1X L 1X
1/8″ (3mm)
K 1X
0.098″ (2.5mm)
4
D

5 G

F 6
A

Recommended torque = 20N.m / 15lb.ft DO NOT OVERTIGHTEN

7

8

J L

H

FRONT

Recommended torque = 20N.m / 15lb.ft

DO NOT OVER TIGHTEN

*IF SUPPLIED WITH POST WEIGHTS, REFER TO INSTRUCTION AI0004 FOR POST WEIGHT ASSEMBLY

I C
02/220317 AI0001

ASSEMBLY INSTRUCTIONS SX SERIES

9

10

11

8X

K

(NOT SUPPLIED)

TABLE TOP

BACK

02/220317 AI0001