VS5HI Voltmeter Sequencer
VS5HI VOLTMETER SE UENCER – INSTRUCTION MANUAL
DESCRIPTION
The VS5HI Voltmeter Sequencer is a high-quality product
developed by JFA Electronics with advanced technology and unique
design. This product comes with an instruction manual that contains
operating instructions and installation guide.
PRESENTATION
The product comes with the following features:
- Selector functions: HOL (Hold) – LIG (ON) – OFF
- Voltmeter selector: LOW – HIGH
- Five remote control outputs
- High input voltage (battery bank)
- GND
- Remote control input
- Low input voltage (+12V)
INSTALLATION EXAMPLE
The product can be installed for low voltage up to 17V and high
voltage up to 500V. The installation example in the manual shows
the connection of the product to five amplifiers and a player. The
product has remote control outputs that can be used to control the
amplifiers remotely.
FUNCTIONS
The product has the following functions:
- Function switch: HOL (Hold) – LIG (ON) – OFF
- Voltmeter selector: LOW – HIGH
The HOL function stores lower voltage, while the LIG function
turns the product on. The product can also be turned off using the
OFF function. The voltmeter selector can be set to measure low
voltage up to 17V or high voltage up to 500V.
RECOMMENDATIONS AND COMMENTS
The product should be installed by a specialized service to
avoid the risk of shock from high voltage. The cables used for
installation should not have damaged insulation cover and should
not be pressed at any point of the installation.
FUNCTION PLAYER
- HOL: On – Off
- LIG: On – Off
- DES: On – Off
- OUTS: On – Off – On – Off – On – Off
- VOLTMETER: On – On – Off
The HOL function can be turned on or off, the LIG function can
be turned on or off, and the DES function can be turned on or off.
The OUTS function has six outputs that can be turned on or off. The
voltmeter function can be set to measure low voltage or high
voltage.
SEQUENCER REMOTE CONTROL
The product has a current output of 150 mA and low voltage
protection of 17.0V. The dimensions of the product are 10x57x17 mm
(WxHxD).
USAGE INSTRUCTIONS
- Read the instruction manual carefully before using the
product. - Install the product using the installation guide in the manual.
Seek help from a specialized service to avoid the risk of shock
from high voltage. - Check the cables used for installation to ensure that they have
no damaged insulation cover and are not pressed at any point of the
installation. - Select the function using the function switch. The HOL function
stores lower voltage, while the LIG function turns the product on.
The product can also be turned off using the OFF function. - Select the voltmeter function using the voltmeter selector. The
voltmeter function can be set to measure low voltage up to 17V or
high voltage up to 500V. - Use the sequencer remote control to control the outputs of the
product remotely. The product has five remote control outputs that
can be turned on or off.
VS5HI VOLTMETER SE UENCER
INSTRUCTION MANUAL
VS5HI VOLTMETER SE UENCER – INSTRUCTION MANUAL
CONGRATULATIONS!
DESCRIPTION
1
2
You have just purchased a product with the quality
JFA Electronics, which was developed with
technology advanced and unique design.
Please read the operating instructions and installation in this guide.
PRESENTATION
The voltmeter and sequencer VS5HI JFA was developed to perform three functions in the same equipment they are: · Low voltage voltmeter to 17V; · High-voltage voltmeter up to 500V; · Remote command sequencer.
3
46 57
1 – Selector functions: HOL (Hold) – LIG (ON) – OFF 2 – Voltmeter selector: LOW – HIGH; 3 – Five remote control outputs; 4 – High input voltage (battery bank); 5 – GND; 6 – Remote control input; 7 – Low input voltage (+12V).
VS5HI VOLTMETER SE UENCER – INSTRUCTION MANUAL
INSTALLATION EXAMPLE
Low voltage up to 17V
Sign in remote output
the player
Amplier 2
Amplier 4
Amplier 1
Amplier 3
Amplier 5
High voltage up to 500V 12V 12V 12V 12V 12V 12V 12V 12V 12V 12V 12V 12V 12V 12V 12V 12V 12V 12V
VS5HI VOLTMETER SE UENCER – INSTRUCTION MANUAL
FUNCTIONS
Function switch: HOL (Hold) – LIG (ON) – OFF
Function switch: 12V (Low Voltage) HV (High Voltage)
Recommendations and comments
1) Due to the risk of shock high voltage, look for a specialized service to perform the installation of this equipment. 2) Do not use cables with damaged insulation cover for this installation. Make sure the cables are not being pressed at any point of the installation.
FUNCTION PLAYER
HOL On (Hold) Off
LIG On (ON) Off
DES
On Off
OUTS On Off On Off On Off
VOLTMETER Stores lower voltage
On On Off
FUNCTION
VOLTMETER Low Voltage Measurement
High voltage measuring
Maximum 17V Maximum 500V
SEQUENCER REMOTE CONTROL
Current at output
150 mA
Low voltage protection
<9,5V
against high voltage protection > 17,0V
DIMENSIONS IN MM (WxHxD) 10x57x17
