Classic Smart Electric Bidet Toilet Seat
Product Information
The Electronic Bidet Toilet Seat is a hygienic product that
provides clean and comfortable bathroom experiences. It is designed
to offer various features such as adjustable temperature wash
spray, air dryer, and seat temperature settings.
Safety Precautions
- Read all instructions before use. Save these instructions for
future reference. - Warning: Using a damaged power plug or loose
electrical outlet may result in death or injury. - Caution: Ensure to use a dedicated electrical
outlet to prevent electric shock or fire. - Do not move the product by pulling the power plug.
- Avoid handling the power plug with wet hands.
- Avoid forcefully bending the power cord or placing heavy
objects on it to prevent damage. - Avoid connecting and pulling the power plug repeatedly.
- Unplug the product before cleaning, repairing, inspecting, or
replacing parts. - Remove any dust or water from the plug.
- Do not plug the appliance into an electrical outlet or power
strip that is being used by too many appliances. Use an electrical
outlet adequate for the voltage requirement of the product. - If the power cord is damaged, do not attempt to repair, modify,
or replace it. Please contact our service center. - If the product produces a strange noise, a burnt smell, or
emits smoke, unplug and disconnect it from the electrical outlet
immediately to avoid electric shock or fire. - Avoid inserting a wire or sharp object in any of the product
gaps or the warm air outlet to prevent electric shock or product
damage. - Avoid placing an electric heater near the product or disposing
of any burning materials such as cigarettes in the toilet to
prevent fire or product deformation. - Avoid placing any containers filled with water, medicines,
food, metallic objects, or flammable materials on top of the
product to prevent electric shock or fire. - Avoid using the product in locations exposed to excessive
moisture and do not splash water onto the product. - While taking a shower or cleaning the bathroom, remove the
power plug from the electrical outlet and exercise caution to
prevent water or detergent from splashing onto the bidet to avoid
electric shock or fire. - Do not disassemble, repair, or modify the product
yourself. - Avoid using the product while bathing.
- Avoid placing or storing the product where it can fall or be
pulled into a bath or sink. - Avoid placing or dropping the product into water or any other
liquid. - If the product falls into water or liquid, disconnect it from
the power outlet immediately. - Avoid operating or storing the product in locations where
flammable or combustible materials are used. - Do not use industrial water or “grey” water for the supply as
this may cause skin damage or disease. - Avoid blocking the warm air outlet with your hand.
- Turn off the main water supply valve when cleaning the
filter. - For children and seniors who have difficulties with adjusting
temperature, those with sensitive skin or impaired heat
sensitivity, set the temperature of the wash spray, air dryer, and
seat to “low” or “off” to prevent burning.
Electronic Bidet Toilet Seat
User Manual
Clean Comfort Hygiene
Table of Content
1
Safety Precautions
Read all instructions before use. Save these instructions for future reference.
Warning
May result in death or injury
Caution
May result in death or injury
Warning
1.Do not use a damaged power plug or loose electrical outlet
2.Make sure to use a dedicated electrical outlet. Failing to do so may result in electric shock or fire.
3.Do not move the product by pulling the power plug.
4.Do not handle the power plug with wet hands
5.Do not forcefully bend the power cord or place heavy objects on it to prevent it from being damaged or deformed.
6.Do not connect and pull the power plug repeatedly.
7.Unplug the product before cleaning, repairing, inspecting or replacing parts.
8.Remove any dust or water from the plug.
9.Do not plug the appliance into an electrical outlet or power strip that is being used by too many appliances. Use an electrical outlet adequate for the voltage requirement of the product.
10.If the power cord is damaged, do not attempt to repair, modify or replace the cord, please contact our service centre.
11.If the product produces a strange noise, a burnt smell or emits smoke, unplug and disconnect from the electrical outlet immediately. Failing to do so may result in electric shock or fire.
12.Do not insert a wire or sharp object in any of the product gaps, or the warm air outlet. This may result in electric shock or product damage.
2
Safety Precautions
13.Do not place an electric heater near the product or dispose of any burning materials such as cigarettes in the toilet. This may result in fire or product deformation.
14.Do not place any containers filled with water, medicines, food, metallic objects or flammable materials on top of the product. If foreign objects enter the product, this may result in electric shock or fire.
15.Do not use the product in locations exposed to excessive moisture and do not splash water onto the product.
16.Do not use the product if it is not working correctly Please unplug the product immediately, close off the main water supply and call our service centre. Failing to do so may result in electric shock or fire.
17.While taking a shower or cleaning the bathroom, remove the power plug from the electrical outlet and exercise caution that water or detergent does not splash onto the bidet. Failing to do so may result in electric shock or fire.
18.Do not disassemble, repair or modify the product yourself.
19.Do not use the product whilst bathing
20.Do not place or store the product where it can fall or be pulled into a bath or sink.
21.Do not place in or drop the product into water or any other liquid.
22.Do not reach for the product if it has fallen into water or liquid, disconnect from the power outlet immediately.
23.Do not operate or store the product in locations where flammable or combustible materials are used.
24.Do not use industrial water or `grey’ water for the supply as this may cause skin damage or disease.
25.Do not block the warm air outlet with your hand.
26.Turn off the main water supply valve when cleaning the filter.
3
Safety Precautions
27. For children and seniors who have difficulties with adjusting temperature, those with sensitive skin or impaired heat sensitivity, set the temperature of the wash spray, air dryer and seat to `’low” or `’off” to prevent burning.
28. Close supervision is necessary when this product is used by children or persons requiring general assistance.
29. Do not press the buttons using excessive force.
30. Do not stand or place heavy objects on the seat cover.
31. Use this product for its intended purpose only. As described in this manual. Do not use any attachments that are not recommended by us.
32. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped in water. Return the product to our service centre for examination.
33. Keep the cord away from heated surfaces.
34. Never block the air openings of the product or place it on a soft surface such as a bed or couch, where the openings may get blocked. Keep the air openings free of lint, hair etc.
35. Never use the product while sleeping or when drowsy.
36. Never drop or insert any objects into any openings or hoses.
37. Do not use the product outdoors or operate where aerosol (spray) products are being used or where it could be exposed to pure oxygen.
38. This product should be earthed in the event of an electrical short circuit earth reduces the risk of an electrical shock by providing an escape route (wire) for the electrical current. This product is equipped with a cord incorporating an earth wire and an earthed plug. The plug must be inserted into a power outlet that has been correctly installed.
39. Unplug this product before filling (fill reservoir) with water only unless otherwise specified by the manufacturer. Do not overfill.
4
Safety Precautions
CAUTION 1. Do not connect the mains water to the hot water pipe (only connect to cold water supply) 2. After the installation, make sure to check all water supply connections for leaks. Rubber washers should be in place for the water connection hoses and T valves. 3. Do not open/close the seat cover using excessive force. 4. Exercise caution that urine does not come into contact with the nozzles or warm air dryer outlet, failure to do so may result in bad odours or malfunction. 5. If the product will not be used for a long period of time, unplug the power cord, close the main water supply valve and drain any water in the water tank. 6. Do not pull out the bidet hose or connection hose using excessive force. 7. Do not use thinners, benzene, acidic chemicals, chloride or hydrochloric acid detergents. This may result in corrosion to the metallic components and potential discolouration or scratches to the bidet body. 8. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or introductions concerning the use of the appliance by a person responsible for their safety. Children should also be supervised to ensure that they do not play with the appliance.
5
Description of Parts
Side Panel Type
Power Plug Operation Panel Heated Seat
Toilet Lid Caution Label
Nozzle for Feminine wash Nozzle for Rear wash
Body Sensor Warm Air Dryer
Stop Spray Bidet Dryer
Water Temp Save Electricity
Kids / Mute
Auto Wash
Water Pressure / Light
Seat Temp
Nozzle Position and Drying Temperature Adjustment
Power
Note : The above illustration is an example only, your version may vary
6
Description of Parts
Remote Control Type
Remote Control
Heated Seat Warm Air Outlet Nozzle for Rear Wash Nozzle for Feminine
Body Sensor
Toilet Lid Caution Label Remote Signal Receiver
Auxiliary Operation Panel
Note : The above illustration is an example only, your version may vary
7
Operation
`Bidet / Massage’ When you are seated and press this button, this activates the feminine wash. The nozzle comes out and sprays water on the feminine area. Press this button again and the nozzle will move forwards and backwards.
`Posterior Spray / Massage’ When you are seated and press this button, this activates the posterior wash. The nozzle comes out and sprays water on the users posterior area. Press this button again and the nozzle will move forwards and backwards.
`Water Temp’ Press `Water Temp’ button to adjust the water temperature to desired level. There are 4 temperature levels indicated by lights. LOW (blue), MEDIUM (pink), HIGH (red) and OFF (no light). Please Note ; The product utilises a reservoir heating tank, temperature changes may take a few seconds to take effect.
`Water Pressure’ While cleansing function is operating, press the `water pressure’ to adjust the water pressure of spray. There are three water pressure levels: LOW , MED and HIGH.
`Dryer’ Press this button to use the warm air drying function.
`Dryer Temp’ While the Dryer function is operation, press `Dryer Temp’ to adjust the temperature. There are 4 settings indicated by; LOW (blue), MEDIUM (pink), HIGH (red) and OFF (no light).
8
Operation
`Seat Temp’ Use this button to control the seat temperature. Whenever the `seat temp’ button is pressed. You can control the seat temperature in four levels (LOW, MEDIUM, HIGH and OFF)
`Kids / Mute’
This function is designed for children. Pressing this button activates the below
process;
1.
Posterior Wash (15 seconds)
2.
Moving Wash (15 seconds
3.
Warm Air Dryer (1 minute)
By pressing the `Bidet’ Button before the `Kids’ function, will activate the spray
suitable for girls. The water spray is gentle for children. If the child’s hips do not
reach the sensor area, the function will still work.
Mute By pressing and holding the `Kids / Mute’ button until two bleeps are heard,
will allow the Washloo to be used in the `Mute’ or silent mode.
`Auto’
When you are seated and press this button, this activates the below process;
1.
Posterior Wash (30 seconds)
2.
Moving Wash (30 seconds)
3.
Warm Air Dryer(3 minutes)
Press `Bidet’ button before `Auto’ and the whole process will be suitable for female
users.
`Enema / Light’ When you are seated and press this button it activates the Enema wash with an
intensive water pulsation to help remove defecation (Some models may vary). When no one is seated, pressing this button will turn `On/Off’ the bowl light.
`Nozzle position’ Adjust nozzle position using forward or backwards button according to your preference and convenience during washing.
`Stop’ All currently operating functions will stop by pressing this button
`Power’
When you press the `power’ button, the product will shut itself down and all
functions will become unavailable.
By re pressing this button power to the product will be restored and functions will
become operational again.
9
Other Functions
1. When no one is using the toilet bidet, pressing the `Save Electricity’ button will lower power consumption for about 8 hours.
3. Both toilet lid and seat have a damping buffer so they can close softly and silently.
2. The unit is fitted with a built in deodoriser which is made of bamboo charcoal.
4. The nozzle is selfcleansing and washes itself before and after operation has been performed.
Accessories
Fixing Plate (Attached to base of
product already)
Rubber Expansion Screw Set
Adjustment Brackets
Plastic Water Pipe (PWP)
T-Joint and Filter Mesh (installed inside already)
10
Sealing Washers x2pcs
Grip Fasteners for PWP x2pcs
Installation
Tools Required
Wrench
Phillips Screwdriver
Installation Step 1
Remove Existing toilet seat/lid. Put the expansion screw rubbers into the
mounting holes.
Remove the Fixing Plate from bottom of the Washloo Product.
Put the fixing plate, adjustment pad and adjustment brackets on the Toilet.
Screw on loosely at the beginning, make sure the fixing plate is centralized.
Slide the main body of the Washloo onto the fixing plate and push forward slowly.
Dismount Lift up the main body of the Washloo
and pull it out.
11
Installation
Installation Step 2
Note : The above illustration is an example only, your version may vary
12
Installation
Installation Step 3
PWP Hose installation and dismantling
Flexible ring inside PWP
As shown here
Remove Blue Fastener Press flexible ring
Pull out PWP
Two examples of water supply connections
Cistern
Hose Connect Water Tank Strainer
Main Unit Connect other side of PWP to Main Unit
PWP
Connect T-Joint Rubber O Ring
Cistern
Main Unit
Connect other side of Rubber O Ring PWP to Main Unit
PWP Connect T-Joint Hose
13
Trial Operation
After you have connected to the water supply, open the angle valve and switch power on. The nozzle will come out which is the self-inspection process. The water temperature indicator flashes which means the water tank is getting water and the indicator will flash when full.it is normal for the nozzle to trickle for 10-15 seconds for the first time after installation).
Note; it is normal for the nozzle to come out and trickle water when you open the angle valve. After the power is switched on, the nozzle will retract and stop flowing.
Example
Function Confirmation
Normal Function
1. Please check each function according to manual.
2. Switch on the power and put a wet towel or cloth on the sensor area. After one minute, the water will be heated to the set temperature and the warm air will work when you press the drying key.
3. When there is no power supply, no function will work.
Example
Use wet towel to activate sensor
14
Maintenance
Seat Cleaning
IMPORTANT; Unplug the product from the power source before cleaning or removing the seat.
Use a soft, damp cloth and a mild cleanser to wipe down the seat. DO NOT scrub or use abrasive products to clean the product. DO NOT use thinners, benzene, acidic chemicals, chloride or hydrochloric acid detergents. This may result in corrosion to the metallic components and potential discoloration or scratches to the bidet body.
Nozzle Cleaning
1. Clean the nozzle frequently. Press `’Bidet Posterior Wash” button so that the nozzle comes out and clean using a soft cloth or tooth brush.
2. Do not pull hard on the nozzle. Press the `Stop’ button after finishing cleaning so that the nozzle will retract automatically.
Mesh Filter Cleaning
Cleaning intervals will differ depending on use and water quality. It is recommended to check the filter at least once every year.
Turn off the water supply valve and unplug the product. Unscrew the T-Joint and take out the mesh filter then clean the filter using a tooth brush whilst under running water to effectively remove any foreign objects/substances from the filter. Replace the mesh filter and carefully check that it is installed properly. If improperly installed, it could result in the product leaking or damage to the internal components within the bidet.
15
Maintenance
Short Term Non-Use
If the product will not be used for more than a few weeks, you can simply unplug it. You may also consider shutting down the water supply off at the wall/stop valve for extra precautions.
Long Term Non-Use
If the product will not be used for an extended period of time (i.e. few months) you should un plug the unit and shut down the water supply at the wall/stop valve. You should then drain the hot water heater system. To drain the hot water system/heater, remove the drainage screw on the back of the bidet seat. Please don’t forget to replace the screw after drainage.
Trouble Shooting
If the bidet appears to be operating abnormally, please review the troubleshooting tips before contacting our service centre as most issues are easily resolved with a few simple steps. If you are unable to resolve the issue after checking the following items, please contact the service centre.
Check Before Continuing
Make sure the bidet is connected to the power supply and that the outlet is working correctly. Make sure the Remote Control has fresh batteries and they are installed correctly. (3x AAA) Make sure main water supply is connected and supply valve is open. Confirm there are no leaks from the hoses and water supply. Make sure mesh filter is clean and free from foreign objects.
After checking items above, refer to the following troubleshooting chart for additional solutions.
16
Trouble Shooting
Problem
Problem Causes
Problem Solutions
The Bidet is not working
Product shuts off during use
1. Bidet not plugged in. 2. No power to bidet. 3. There is power, but no operations are working when trying to use. 4. Not activated by body sensor.
1. Washing time exceeded (check handbook for auto timings) 2. Power failure.
1. Make sure the bidet is plugged in. 2. Check the power button on the control panel to see if it is turned `Off.’
3. Check remote control batteries are not dead for the models with remotes.
1. Press the wash button to extend the time.
2. Check power to the Washloo.
Lower water flow / Spray pressure
1. Clogged Mesh Filter 2. Water supply valve not opened fully.
3. Nozzle outlets are dirty/clogged. 4. Pressure settings are set to low.
1. Remove, clean and reinstall mesh filter (as per guidelines).
2. Check water supply is fully open. 3. Clean Nozzle Outlets as per guidelines.
4. Adjust water pressure settings.
Bidet wash feature does not work or fails to spray.
Seat not heated.
Water (Wash Spray) not heated.
Body sensor does not detect that you are sat on the Washloo.
Seat temperature set to off
Water temperature set to off.
Adjust seating position to fully cover the body sensor.
Make sure that the seat temp setting is on (Low Blue light, Med Pink Light, High Red Light and Off No Light.) Make sure that the water temp
setting is on (Low Blue light, Med Pink Light, High Red Light and Off
No Light.)
Water flows before or after use.
Water coming from the nozzles.
1. The water that comes out between the nozzles before or after use, is the `self-cleaning’ operation
and is not a malfunction. 2. Residual water may drip into the bowl for several seconds after the wash or self-cleaning function has operated. This is not a malfunction.
Water leaks from areas other than the nozzles.
1. Water is leaking from the T-Valve. 2. Water leaking from the Bidet hose
connection.
1. Make sure that the rubber washer is inserted correctly and firmly tighten the connector. 2. Make sure the bidet hose is correctly connected and tight.
17
Technical Specifications
18
Voltage
Product Specification AC220-240V 50HZ/60HZ Optional
Water Supply Water Pressure
Warm Washing
Warm Air Dryer
Warm Seat
Power Cord Length Safety Device IP Rating Weight Size Colour Certificate
Direct connection to water pipe Equivalent to 0.8-7.5 BAR Water Pressure Adjustable in 4 levels
Temperature control (4 Levels, room temperature/33°C/37°C/42°C Adjustable) Heater Capacity : 1350W/750W Tank Capacity ; 1L Temperature Control system, over heat protection with water and electricity isolation system.
Power : 200W
Temperature control (4 Levels, room temperature/35°C/40°C/45°C Adjustable) Temperature Control system, over heat protection with water and electricity isolation system. Power : 50W Soft Closing Lid Design
Temperature control (4 Levels, room temperature/30°C/35°C/40°C Adjustable) Temperature Control system, over heat protection with water and electricity isolation system. 1.5m
Floating Switch, temperature sensor, temperature fuse, earth leakage protection, Water and electricity isolation system. IPX4 N.W 3.7 kgs G.W 5.4 kgs
510mm*455mm*145mm (elongated type) 480mm*455mm*145mm (round type) White CE RoHS SAA
Warranty
This electronic bidet has been designed and manufactured with great care and attention to detail. We offer a 24 month warranty. In the following cases the warranty does not apply;
1. Damage or loss sustained in fire, earth quake, flood, thunder or other acts of providence, pollution, gas damage, salt damage and abnormal voltage.
2. Damage or loss resulting from installation methods not in the manual, any unreasonable use, abuse, negligence or improper maintenance.
3. Damage or loss resulting from modification, disassembly and destruction of the product.
4. Damage or loss resulting from water stain retention, sediments or foreign objects contained in the water system.
5. Damage or loss resulting from relocation after instalment, improper installation or in a hazardous environment.
6. Damage or loss resulting from defect caused by miss-fitting or wrongly shaped attachment
7. Damage or loss resulting from bites by animals or insects or residual of dead animals or insects.
8. Damage or loss resulting from product freezing.
9. Damage or loss resulting from use of the product if mounted on moving vehicles such as cars, ships and caravans.
10. Damage or loss resulting from consumption of battery etc.
11. Damage or loss resulting from lack of user’s maintenance points (i.e. water drain valve, filter, washer, packing etc.).
12. Damage or loss resulting from physical or accidental damage; This includes cracks, stress marks and breakages from over extension or force of the lid cover and seat.
19
Important User Manual Information
If you want to dispose of this product, do not mix with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Only discard discharged batteries. They should not be disposed of household waste, use appropriate collection sites.
20
Modern Life, Smart Choice
