100094794 Wireless Bone Conduction Headphones

Product Information:

The product is a pair of wireless bone conduction
headphones.

FCC ID: 2ALVK-ONN94794

Produced for Walmart Inc., Bentonville, AR 72716

Ver.01 12/18/22

Product Usage Instructions:

1. Ensure that the headphones are fully charged before use.
2. Press and hold the power button to turn on the headphones.
3. Pair the headphones with your device by following the Bluetooth
   pairing instructions provided by your device.
4. Once the headphones are paired, adjust the volume using the
   volume controls on the headphones or your connected device.
5. Place the headphones on your head, ensuring that the
   transducers are positioned in front of your cheekbones.
6. Adjust the fit of the headphones using the adjustable headband
   or ear hooks, if applicable.
7. You can now enjoy wireless audio through bone conduction
   technology.
8. To turn off the headphones, press and hold the power button
   until the LED indicator turns off.

If you experience any issues or need assistance, please contact
our customer support team at 1-888-516-2630. Our support hours are
from 7 a.m. to 9 p.m. CST.

” #

We’d Iove to hear from you. Scan with your Walmart app and let us know what you think.

100094794
1 94346 00502 4

The Fine Print
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

The Fine Print

— Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1 ) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Warning:
Changes or modifications to this unit not espressly approved by the party responsible for compliance could void the user´s authority to operate the equipment.

Need help? We’re here for you every day from 7 a.m.-9 p.m. CST. Give us a call at 1-888-516-2630.

Produced for Walmart Inc., Bentonville,AR 72716
Ver.01 12/18/22

FCC ID : 2ALVK-ONN94794

The Fine Print
RF Exposure Compliance This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the FCC. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.

Wireless Bone Conduction Headphones
Quick Start Guide

:mm

A

B

C

200 150-<200 100<150 60-<100

” ±0.25 ±0.40 ±0.80
±0.20 ±0.35 ±0.70 ±0.16 ±0.30 ±0.60 ±0.13 ±0.25 ±0.50

30-<60

±0.10 ±0.20 ±0.40

10-<30
1-<10

±0.07 ±0.15 ±0.30 ±0.05 ±0.10 ±0.20

<1

±0.03 ±0.05 ±0.10

ANGLES

±0.5° ±1° ±1°

:FMMPX

#MBDL

‘PSFTU

$IBSUSFVTF

#

$

Get to Know your Headphones

What’s in the Box?

Check to make sure you have everything below

1

2

Wireless Bone Conduction Headphones
Quick Start Guide
3

4

1. Wireless Bone Conduction Headphones x1 2. Charging Cable With Magnetic Connection x1 3. Quick Start Guide x1 4. Storage pouch x 1

01 Let’s Get Started! Power On/Off/Pairing
Power On Press and hold power button for 2s until you hear “power on”. Power off Press and hold power button for 2s until you hear “power off”.
2S
Pairing * Connect to your device through Bluetooth wireless technology, search for the entry ” onn. Bone Conduction “. * Multipoint connection: Press and hold “volume up” and “volume down” buttons together for 1s to entry pairing model.
onn. Bone Conduction

Enjoy your Music
Play/Pause x1 Press power button Siri/Voice Assistant x2 Press power button
Previous song Press and hold Volume down x1 Press
Next song Press and hold Volume up x1 Press

02

Take a clear Phone call

Answer a call x1 Press power button
Hang up a call x1 Press power button
Reject a call x2 Press power button

Charge your Headphones

04

Connect USB-A to 5V power adapter. Use the in-box cable to charge headphones.

5V 0.5A The LED indicator will be red when charging. The LED indicator will be green when fully charged.
About 1.5 hours

$

1.()RoHS2.0REACHCP65

2. 157g

3.2
% 4.

5.A

6.-

7.

8./

9.

NO

/

: : : : : :

CH-5181B

: %

:
: mm

: 1/1

: 1/1 : A/0

References

• P65Warnings.ca.gov