Weldclass Platinum Lt40 Lpg Burner Torch System User Guide

Weldclass Platinum LT40 LPG Burner Torch System User Guide

PRODUCT INSTRUCTION

 Up to 500mj/hr (475,000 BTU) output

 Use with standard 4/9/45kg LPG bottle

 Metal Heating & Weld Pre-heating

 Weed Burning

 Bitumen Heating & Concrete Curing

 Water-Proofing, Drying & Thawing

 Heat Shrinking/ Wrapping

All specifications are subject to change without notice. While all care has been taken, Weldclass accepts no responsibility for any inaccuracies, errors or omissions in this document or attachments. Any comments regarding intended application are for description and identification purposes only. It is the sole responsibility of the user and/or owner and/or purchaser to select the appropriate product for their intended purpose and to ensure that the product selected is capable of performing correctly and safely in the intended application. E.&O.E.

COMBO KIT # WC-02991

The “all in one” kit with two tube lengths & two tip sizes. Gas regulator reduces operating pressure to ≤400kpa for reduced gas consumption, more controlled/ consistent gas flow & finer flame adjustment.

MAXFLAME KIT # WC-02989

Operates on full bottle pressure*, with large tip for maximum heat output & flame size. *typically 600-1400 kpa depending on ambient temperature

HANDY FLAME KIT # WC-02988

TORCH ONLY KIT # WC-02990

Technical Data