YX03 Karaoke Party Speaker Machine
Product Information: The product is a microphone with a frequency
range of CH B: MHz 580.5581.5582.5583.5584.5585.5586.5587 .5
588.5589.5590.5591.5592.5593.5594.5. Product Usage Instructions: To
use the microphone, follow the steps below: 1. Ensure that the
microphone is properly connected to the device you intend to use it
with. 2. Turn on the microphone and the device it is connected to.
3. Adjust the frequency setting on the microphone to match the
desired channel. 4. Position the microphone at an appropriate
distance from the sound source. 5. Speak or sing into the
microphone clearly and at an appropriate volume. 6. Monitor the
audio output to ensure that the microphone is capturing sound
correctly. 7. Adjust the microphone’s gain or volume control, if
necessary, to achieve the desired audio level. 8. When finished,
turn off the microphone and disconnect it from the device. Note:
Refer to the full user manual for detailed instructions on
connecting and configuring the microphone for specific devices and
settings.
9.Microphone frequency CH B: MHz 580.5581.5582.5583.5584.5585.5586.5587 .5 588.5589.5590.5591.5592.5593.5594.5;
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modi cations to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposur condition, compliance with exposure requirements.
