UBSDVH60SS.1 Traditional Cooker Hood

Product Information: UBSDVH60SS.1 _UBSDVH90SS.1 Version 01

The UBSDVH60SS.1 _UBSDVH90SS.1 is an appliance used for
ventilation and extraction purposes in the kitchen. The package
includes one piece of [01], one piece of [02], four pieces of [04],
one piece of [03], one piece of [05], four pieces of [06], four
pieces of [07], four pieces of [08] (4 x 40mm), and four pieces of
[09] (4 x 30mm). This appliance must be installed by a qualified
person, following the manufacturer’s instructions.

Product Usage Instructions

Safety

Before proceeding with the installation and use of this
appliance, it is important to read the instructions carefully for
safety reasons. The power supply must be cut off before installing
the appliance completely to avoid electric shock. Additionally,
cleaning should be done according to the instructions provided to
avoid the risk of electric shock and fire.

Ensure that you use the correct fixings suitable for the
substrate where the appliance will be installed and that they are
able to support the weight of the appliance. Use only the same size
of fittings and mounting screws as recommended in this instruction
manual to avoid electrical hazards.

Before carrying out any maintenance work or cleaning, switch off
the appliance at the mains supply to avoid electrical hazards.
Accessible parts may become hot when used with cooking appliances,
so young children should be kept away from them. Care should be
taken to avoid touching the appliance.

To avoid the risk of fire, do not flame under the hood. Clean or
replace the grease filter regularly and closely monitor pans
containing hot oil.

An all-pole disconnection switch having a contact separation of
at least 3mm in all poles should be connected during installation.
Before connecting the hood, check that the supplied voltage and
frequency match with that indicated on the appliance rating plate.
Consult local regulations regarding extraction outlets and ensure
these are complied with. Do not connect the hood to a ventilation
or hot air duct containing combustion fumes from burning gas or
other fuels. Confirm that room ventilation is appropriate with the
local authorities.

This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision. Keep the appliance and its
supply cord out of the reach of children less than 8 years old.

Installation

The appliance must be installed correctly by a qualified person,
strictly following the manufacturer’s instructions. Means for full
disconnection must be incorporated in the fixed wiring in
accordance with the local wiring installation rules for your
country. If in doubt, ask for advice instore or from a qualified
installer.

Care and Maintenance

Before carrying out any maintenance work or cleaning, switch off
the appliance at the mains supply to avoid electrical hazards.
Clean or replace the grease filter regularly and closely monitor
pans containing hot oil to avoid the risk of fire. Do not flame
under the hood.

Troubleshooting

If the hood stops working during an electrostatic discharge
(e.g. lightning), switch off the electricity supply to the hood and
reconnect after one minute.

Direct Connection

Before connecting the hood, check that the supplied voltage and
frequency match with that indicated on the appliance rating plate.
Consult local regulations regarding extraction outlets and ensure
these are complied with. Do not connect the hood to a ventilation
or hot air duct containing combustion fumes from burning gas or
other fuels. Confirm that room ventilation is appropriate with the
local authorities.

Recycling and Disposal

Dispose of the appliance in accordance with local regulations.
Do not dispose of the appliance with normal household waste.

Technical Data

Refer to the technical data provided in the user manual for more
information.

Appendix

Refer to the user manual appendix for additional
information.

UBSDVH60SS.1 _UBSDVH90SS.1 Version 01

EN INSTRUCTIONS FOR USE

EN
Let’s
get started…

Getting started…

03

Safety

04

Checking instructions

08

In more detail…

10

Use

10

Care and maintenance

11

Trouble shooting

12

Direct Connection

13

Recycling and disposal

14

Technical data

15

Appendix…

Installation

31

3

Getting started…

EN
Safety
These instructions are for your safety. Please read the following instructions carefully before proceeding with the installation and use of this appliance.
This appliance must be installed correctly by a qualified person, strictly following the manufacturer’s instructions.
WARNING: Danger of electric shock! The power supply
must be cut off before the appliance is installed completely.
WARNING: There is a risk of electric shock and
fire if cleaning is not carried out in accordance with these instructions.
WARNING: Where applicable, this appliance is supplied
with fixings. Please ensure you use the correct fixings suitable for the substrate where the appliance will be installed and that they are able to support the weight of the appliance.
WARNING: Use only the same size of fittings and
mounting screws as recommended in this instruction manual. Failure to follow these instructions may result in electrical hazards.
WARNING: Switch off the appliance at the mains supply
before carrying out any maintenance work or cleaning.
WARNING: Accessible parts may become hot when
used with cooking appliances. Young children should be kept away. Care should be taken to avoid touching the appliance.
WARNING: Do not flame under the hood. To avoid the
risk of fire, clean or replace the grease filter regularly and closely monitor pans containing hot oil.
4

Getting started…

EN
Safety
WARNING: Means for full disconnection must be
incorporated in the fixed wiring in accordance with the local wiring installation rules for your country. An all-pole disconnection switch having a contact separation of at least 3mm in all poles should be connected during installation.
WARNING: Before connecting the hood, check that the
supplied voltage and frequency match with that indicated on the appliance rating plate. Failure to install the appliance in accordance with these instructions may result in a safety hazard. If in doubt, ask for advice instore or from a qualified installer.
WARNING: Consult local regulations regarding
extraction outlets and ensure these are complied with. Do not connect the hood to a ventilation or hot air duct containing combustion fumes from burning gas or other fuels. Confirm that room ventilation is appropriate with the local authorities.
WARNING: The hood may stop working during an
electrostatic discharge (e.g. lightning). This involves no risk of damage. Switch off the electricity supply to the hood and reconnect after one minute.
WARNING: This appliance can be used by children aged
from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Keep the appliance and its supply cord out of the reach of children less than 8 years old.
5

Getting started…

EN
Safety
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a safety hazard.
Do not install the appliance outdoors in a damp place or in an area which may be prone to water leaks such as under or near a sink unit. In the event of a water leak affecting the appliance, do not use and contact customer services to arrange for inspection.
Do not use flammable sprays in close vicinity to the appliance.
Please dispose of the packing material carefully. There is a fire risk if cleaning is not carried out in accordance with the instructions. Refer to the Care and Maintenance sections carefully for details on how to clean and replace the aluminium and carbon filters (if fitted).
Refer to the Care and Maintenance section for details on the type of lamps that can be used and how to replace them.
Do not use a steam cleaner for care and maintenance.
The appliance is not intended to be operated by means of an external timer or separate remote control system.
There shall be adequate ventilation of the room when the hood is used at the same time as appliances burning gas or other fuels. Ensure that the negative pressure of the installation site does not exceed 4 Pa (0.04 mbar) to ensure combustion fumes are not drawn back into the room.
Do not use the hood if it shows signs of damage or imperfection. Contact customer services for assistance.
6

Getting started…

EN
Safety
The manufacturer declines all liability for personal or material damage as a result of misuse or incorrect installation of this appliance. The appliance is for domestic use only as an extractor hood. When installing the appliance, make sure that the following distances between the top of cooker or hob and the lowest part of the cooker hood must be observed: > Gas hobs: 750mm. > Electric hobs: 650mm. Important: If the room contains a fuel burning appliance, such as a gas, or oil fired, central heating boiler, which is not of the `Balanced Flue’ type, you should make sure that there is adequate air inlet into the room at all times so that fumes from the boiler are not drawn back into the room by the Cooker Hood.
7

Getting started…

EN
Checking instructions
Things to check before you start
To avoid the risks that are always present when you use an electrical appliance it is important that this cooker hood is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. After unpacking the cooker hood please check that it is not damaged. If in doubt, do not use the appliance but contact Customer Services on 0344 800 1128 (UK) and 01 4475261 (Ireland). Check the package and make sure you have all of the parts listed. Decide on the appropriate location for your product. If this product contains glass please take care with fitting or handing to prevent personal injury or damage to the product. This specifications plate is available on this appliance. This plate displays all the necessary identification information for ordering replacement parts. If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass on this manual so that the new owner can become familiar with the appliance and its safety warnings.
Ø8mm
8

Getting started…

Accessories not supplied
Recirculation

EN
Checking instructions
Extraction

SCF4 (UK & IE)
SELF ADHESIVE ALUMINIUM TAPE

Ø125mm VENT PACK
CARBON FILTER ORDERING HOTLINE
0344 800 1128 (UK) 014475261 (IE)

9

In more detail…

EN
Use
Before you start WARNING: Read the instructions before using the appliance.
Switch on the appliance at the switched fused connection unit. The appliance is ready for use.
Function & Settings
Touch control panel
Off button for extractor fan. Extractor fan speed 1 button. Extractor fan speed 2 button. Extractor fan speed 3 button. On/off button for built-in light.
To obtain the best results from your cooker hood it is recommended that you leave it switched on for 15 minutes after you have finished cooking.
10

In more detail…

Lamp replacement

EN
Care and maintenance

WARNING:
Always switch off the electricity supply before carrying out maintenance work on the hood. In the event of a fault, contact customer services.

FUSE OFF

NOTE: If the lamp fails please contact the after-sales care.
11

In more detail…

EN
Care and maintenance
Carbon filter replacement
Replace carbon filters every three months.
3 MONTHS
1 X CARBON FILTER (NOT SUPPLIED). MODEL NUMBER SCF4 (UK & IE) CARBON FILTER ORDERING HOTLINE 0344 800 1128 (UK) 014475261 (IE)
Aluminium grease filters cleaning
To avoid fires, clean thoroughly once a month. To do so, remove the filters and soak in hot water and detergent for an hour. If using a dishwasher, position the fillters vertically to improve the cleaning process.
1 MONTHS
MAX.65°C
WARNING: Increase the filter cleaning/replacement frequency
if the hood is used for more than 2 hours a day. Always use genuine filters from the manufacturer. 12

In more detail…

Trouble shooting

EN
Trouble shooting

Problem

Possible cause

Excessive vibration. The appliance is not installed properly on the brackets.

The fan blade is damaged.

Solution
Take down the appliance and

The light is on, but the fan does not work.

tightly. The fan blade is jammed. The motor is damaged.

to be carried out by qualified service personnel only.

Both the light and Light bulb blown. motor do not work. Power connection loose.

Contact Customer Services on. Check power supply.

Suction performance Speed may be too low. reduced.

Select a higher speed.

Care and maintenance section).

Top vent might be obstructed. Clear any obstruction.

Optional vent kit might be twisted.

according to the manufacturer’s instructions.

The installation may not comply with the manufacturers instructions.

The vent hose should be correct diameter throughout with no reductions or restriction.(See installation section).

Works normally but cooking smells linger.
The hood does not work.
The hood still does not work.

recirculation mode or is full of

grease.

maintenance section).

Check that the hood is connected to power. Check that the fuses or automatic have not jumped.

If, after having checked the points mentioned above, your problem has not yet been solved, contact the technical service or your distributor.

13

EN
Direct Connection

In more detail…

Direct Connection

All installation must be carried out by a competent person or qualified electrician. Before connecting the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate.
The appliance must be connected directly to the mains using an omnipolar circuit breaker with a minimum opening of 3mm between the contacts.
The installer must ensure that the correct electrical connection has been made and that it complies with the wiring diagram.
The cable must not be bent or compressed.
Regularly check the power plug and power cord for damage. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
WARNING: This is a Class I appliance and MUST be earthed
This appliance is supplied with a 3 core mains cable coloured as follows: Brown = L or Live Blue = N or Neutral Green and Yellow = E or Earth

EUR

N

N

L

L

UK
DOUBLE POLE SWITCHED FUSED SPUR OUTLET

N (Blue) L (Brown)
(Green/Yellow)

FUSE ON
USE A 3AMP FUSE

The fuse must be rated at 3 Amps.
To avoid the risks that are always present when you use an electrical appliance it is important that this appliance is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. Please keep this instruction booklet for future reference and pass it on to any future owners. After unpacking the appliance please check that it is not damaged. If in doubt, do not use the appliance but contact Customer Services.

14

In more detail…

Direct Connection EN Recycling and disposal
Direct Connection
The manufacturer declines all liability for damage caused to persons and objects due to incorrect or improper installation of the appliance. Any permanent electrical installation must comply with the latest wiring regulations applicable to your country and for your own safety a qualified electrician or contractor should undertake the electrical installation.
Recycling and disposal
Waste electrical products (WEEE) should not be disposed of with household waste. Please recycle where facilities exist. Check with your local governmental authority, domestic waste disposal services or the retailer where the product was bought for recycling advice. The wheelie bin symbol on the product or its packaging indicates that this product cannot be treated as normal household waste. This product must be handed over to an electric and electronic equipment collection point for recycling. On ensuring that this product is disposed of correctly, you will help to avoid possible negative consequences for the environment and public health, which could occur if this product is not handled correctly.
15

In more detail…

EN
Technical data
Supply voltage Power consumption – Fan Power consumption – Luminary Power consumption – Total
Protection class Light bulb

220-240V~, 50Hz 60W
1 x 1.5W Max 61.5W I
Max. 1.5W (LED Module)

Information for EU No. 66/2014 and No. 65/2014 A. Information of the cooker hood

Model Identification Annual Energy Consumption
Time increase factor Fluid Dynamic Efficiency
Energy Efficiency Index
Measured air flow rate at best efficiency point Measured air pressure at best efficiency point Maximum air flow
Air flow in normal use
Measured electric power input at best efficiency point Nominal power of the lighting system Average illumination of the lighting system on the cooking surface Lighting Efficiency
Measured power consumption in standby mode Measured power consumption off mode Sound power level
Grease Filtering Efficiency
16

Symbol
UBSDVH60SS.1
AEC
hood
f
FDE
hood
EEI
hood
Q
BEP

Value
34.9 1.7 8.9 75.9 131.6

Unit UBSDVH90SS.1
KWh/a
M3/h

P

BEP

133

PA

Q
MAX

190.8

M3/h

Highest setting: 189.5 Lowest setting: 97.7

M3/h

W
BEP

54.4

W

W
L

1.5

W

E
middle

90

80

lux

LE
hood

60

53.3

lux/watt

P
s

–

W

P
o
L
WA
GFE
hood

0

W

Max.63 / Min.47

dB

67.2

%

In more detail…

EN
Technical data
The measurement and calculation method of the above table was done in accordance with Commission Delegated Regulation (EU) No 65/2014 & Commission Regulation (EU) No 66/2014. B. The following shows how to reduce total environmental impact (e.g. energy use) of the cooking process. 1. Install the cooker hood in a proper place where there is efficient ventilation. 2. Clean the cooker hood regularly so as not to block the airway. 3. Remember to switch off the cooker hood light after cooking. 4. Remember to switch off the cooker hood after cooking. C. Information for dismantling. This appliance cannot be dismantled by the user, other than that as shown in the original assembly of the user manual. At the end of its useful life, the appliance should not be disposed of with household waste. Check with your local governmental authority, domestic waste disposal services or the retailer where the product was bought for recycling advice.
17

Installation
01

A

B

SCF4 Ø125mm

SCF4 Ø125mm

Choose a type of installation: A – Extraction option; B – Recirculation option
WARNING: Beware of any sharp edge of metal plates, wear suitable
protective gloves when handling the product.

18

Range hood’s width 600/900mm, the distance is 460/760mm

66.5mm

85mm

02

20mm 138mm

MIN.750mm
(Gas / Gaz)
MIN.650mm
(Electric / Electrique)
Mark the wall with the hole positions as shown in diagram.
WARNING: Caution! Before drilling it is extremely important to check the wall for hidden
pipes, electrical cables etc using an appropriate detection device.
19

03-I

I

For wall mounting.

2mm

04-I
2mm

20

05-I

Tighten all screws.

06-I
[08] x 2
21

07-II

II

For cupboard installation.

Range hood’s width 600/900mm, the distance is 520/820mm

200mm

110mm

260mm 30mm Mark and drill the cabinet with the 5 holes positions as shown in the diagram.
08-II
[09] x 4 [06] x 4 [07] x 4
22

A

Only for ducted option.

B

Only for recirculation option.

09-A
[02] x 1 [03] x 1 Ø125mm
10-B
[05] x 1
23

11 12
24

13
After installation, remove the protective film from cooker hood body (Only for Stainless Steel hood).
25

Apelson Appliances UK Ltd Unit 3 Normandy Landings Pope Street Castleford WF6 2AG