Mieres 2191xx 1-light Wall Sconce Instruction Manual

2191XX 1-Light Wall Sconce

Product Information

The product is a light fixture with the model number #2191XX. It
comes with a mounting package and includes the following parts:

  • OUTLET BOX
  • BACK PLATE
  • MOUNTING SCREW
  • FIXTURE GROUND WIRE
  • SUPPLY GROUND WIRE
  • WHITE SUPPLY WIRE
  • RIBBED (OR WHITE) FIXTURE LEAD WIRE
  • BLACK SUPPLY WIRE
  • SMOOTH (OR BLACK) FIXTURE LEAD WIRE
  • WIRE CONNECTOR
  • GROUND SCREW
  • 5/32 HEX NUT
  • FIXTURE MOUNTING SCREW
  • COVER PLATE
  • DECORATIVE NUT
  • SOCKET
  • FIXTURE ASSEMBLY
  • GLASS SHADE
  • SOCKET RING

Product Usage Instructions

  1. Turn off the main power at the circuit breaker before
    installing the fixture.
  2. If you are unfamiliar with proper electrical wiring
    connections, obtain the services of a qualified electrician.
  3. Remove the fixture and mounting package from the box and make
    sure that no parts are missing by referencing the illustrations on
    the installation instructions.
  4. Knock out the set of perforated slots on the center of the BACK
    PLATE that matches your OUTLET BOX.
  5. Screw the #8-32 FIXTURE MOUNTING SCREWS into the BACK PLATE and
    thread the 5/32 HEX NUTS onto the FIXTURE MOUNTING SCREWS. Secure
    the position of the FIXTURE MOUNTING SCREWS by tightening the HEX
    NUTS against the BACK PLATE.
  6. Pass the power supply wires and the SUPPLY GROUND WIRE through
    the center hole of the BACK PLATE and secure the BACK PLATE to the
    OUTLET BOX with MOUNTING SCREWS.
  7. Screw the FINIAL onto the FIXTURE ASSEMBLY.
  8. Place the COVER PLATE onto the FIXTURE MOUNTING SCREWS, and
    secure it into place using the DECORATIVE NUTS provided.
  9. Slide the GLASS SHADE over the SOCKET, secure it with the
    SOCKET RING.
  10. Screw a light bulb into the socket and make sure it does not
    exceed the maximum wattage specified on the fixture’s wattage
    rating label.
  11. Installation is now completed.

ASSEMBLY & INSTALLATION INSTRUCTIONS FOR #2191XX
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.

ASSEMBLY AND INSTALLATION (Continued)
5. Screw the FINIAL(15) onto the FIXTURE ASSEMBLY(17).
6. Place the COVER PLATE (14) onto the FIXTURE MOUNTING SCREWS (13), and secure it into place using the DECORATIVE NUTS(16) provided.
7. Slide the GLASS SHADE (19) over the SOCKET(18), secure with the SOCKET RING(20).
8. Screw light bulb into the socket and make sure it does not exceed the maximum
wattage specified on the fixture’s wattage rating label.
INSTALLATION IS NOW COMPLETED

ASSEMBLY AND INSTALLATION

1. At the center of the BACK PLATE (2) there are eight perforated slots. Knock out the set matches your OUTLET BOX (1).
2. Screw the #8-32 FIXTURE MOUNTING SCREWS (13) into the BACK PLATE (2) and thread the 5/32 HEX NUTS (12) onto the FIXTURE MOUNTING SCREWS (13), as shown. Secure the position of the FIXTURE MOUNTING SCREWS (13) by tightening the HEX NUTS (12) against the BACK PLATE (2).
3. Carefully pass the power supply (6&8) wires and the SUPPLY GROUND WIRE (5) through the center hole of the BACK PLATE (2). Secure the BACK PLATE (2) to the OUTLET BOX (1) with MOUNTING SCREWS (3).
4. Attach the BLACK SUPPLY WIRE (8) to the SMOOTH (or BLACK) FIXTURE LEAD WIRE (9) by using the WIRE CONNECTOR (10). At the same manner, attach the WHITE SUPPLY WIRE (6) to the RIBBED (or WHITE) FIXTURE LEAD WIRE (7). Loop the FIXTURE GROUND WIRE (4) around the GROUND SCREW (11) of the BACK PLATE (2). (Note: Be sure to provide an extra 3″ length of the FIXTURE GROUND WIRE (4) for connection to the SUPPLY GROUND WIRE (5).) Tighten the GROUND SCREW (11). Connect the remaining FIXTURE GROUND WIRE (4) to the SUPPLY GROUND WIRE (5) using a WIRE CONNECTOR (10). Place wiring and connections inside the OUTLET BOX (1).

1. OUTLET BOX 2. BACK PLATE 3. MOUNTING SCREW 4. FIXTURE GROUND WIRE 5. SUPPLY GROUND WIRE 6. WHITE SUPPLY WIRE 7. RIBBED (OR WHITE) FIXTURE LEAD WIRE 8. BLACK SUPPLY WIRE 9. SMOOTH (OR BLACK) FIXTURE LEAD WIRE 10. WIRE CONNECTOR

11. GROUND SCREW 12. 5/32 HEX NUT 13. FIXTURE MOUNTING SCREW 14. COVER PLATE 15. DECORATIVE NUT 16. SOCKET 17. FIXTURE ASSEMBLY 18. GLASS SHADE 18. SOCKET RING

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals