PROFESSIONAL MEDICAL PRODUCTS
SILVER ROLLATOR WITH SEAT WITH SEAT- FOLDABLE
Instruction Manual
M43143FR Silver Rollator With Seat With Seat- Foldable
All serious accidents concerning the medical device supplied by us must be reported to the manufacturer and competent authority of the member state where your registered office is located.
INTRODUCTION
This manual provides the instructions for a correct use of our patient aid or an assistant / carer.
INTENDED USE
The rollator is designed to be used inside buildings by patients with an impairment to legs.
The devices are intended to provide a support to the body. This aid allow patient mobility making it easy to walk. They must be used with two arms in order to guarantee safe operation.
WARNING! The rollator is built for indoor use and only on flat surfaces. If it is necessary to employ the devices outside we advise to follow the road rules like any pedestrian.
Before each use make sure that:
- The walker has been adjusted to the correct height.
- The tips are in good condition. Should they be worn or missing, replace them immediately.
- Make sure that the legs of the walker have been adjusted to the same height.
WARNING!
Do not use the equipment in case it is damaged or any component is missing.
Do not use the patient aids for purposes not mentioned in this user manual.
Do not cross obstacles or use the patient aids on uneven surfaces, or wet and slippery. The use of the device is not recommended for people with poor functionality in the hands and arms.
Only use original accessories and spare parts. The use of non-original accessories or spare parts could cause the risk of falls and injuries. Do not use on stairs. The use of walkers in water (showers, bathtubs, swimming pools, etc.) can favour the oxidation of the operating mechanisms, causing damage to the walker and/or injury to the user.
Max load 100kg
ASSEMBLY

Step 1: To open folded frame assembly, follow the direction of the arrows shown in the picture, lift the seat and place it on the support; to add the basket lift the seat and insert the basket in the bracket, after lower the seat. Position the back handle (7) and lock it, position the handle with braking system (2) and lock it at the desired height shown in the picture, tighten the locknut.

Step 2: Try to push the vehicle to check the reliability of the brake, according to their characteristics can be adjusted as appropriate; commissioning is completed you can use.
| N° | Parti | PZ |
| 1 | Basket | 1 |
| 2 | Handle with braking sistem | 2 (left and right) |
| 3 | Plastic gasket | 2 |
| 4 | Removable handle | 2 |
| 5 | Hex screw | 2 |
| 6 | Seat | 1 |
| 7 | Back Handle | 1 |
| 8 | Frame assembly | 1 |
![]() | Manufacturer | Keep in a cool, dry place | |
![]() | Consult instructions for use | Keep away from sunlight | |
| Product code | ![]() | Lot number | |
![]() | Date of manufacture | Medical Device | |
| Authorized representative in the European community | ![]() | Caution: read instructions (warnings) carefully | |
![]() | Medical Device compliant with Regulation (EU) 2017/745 | ||
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.
FS965LH-1 (GIMA 43143)
Foshan Dongfang Medical Equipment Manufactory (LTD.)
5 Xingfu Road, Zone A, Shishan Industrial Park,
Nanhai District, Foshan City, China, 528000
Made in China
MedNet EC-Rep GmbH
Borkstrasse 10. 48163 Muenster. Germany
Imported by: Gima S.p.A.
Via Marconi, 1 – 20060 Gessate (MI) Italy
[email protected] – [email protected]
www.gimaitaly.com
M43143-M-Rev.2-02.22![]()






















