SwipeSense Asset Tag

The SwipeSense Asset Tag is a small device designed to track
assets within a facility. It is manufactured by SwipeSense, Inc.,
located at 4424 N Ravenswood Ave. Chicago, IL. 60640. You can
contact them at (847) 440-6215.

Product Information

Model: 221.0
Page: 1 of 4
Date: June 2023

Safety and Regulatory Information

This device complies with part 15 of the FCC Rules. It operates
under the following conditions:

This device may not cause harmful interference.
This device must accept any interference received, including
interference that may cause undesired operation.

Warning: Any changes or modifications not approved by the
responsible party may void the user’s authority to operate the
equipment.

RF Exposure: This equipment meets FCC RF Exposure requirements
and should be installed and operated with a minimum distance of
20cm between the radiator and any part of the human body.

Warnings:

This device is for indoor use only.
This device should only be installed by trained SwipeSense
personnel.
Do not open the device as there are no user serviceable parts
inside, and it is powered at all times.
Do not use if the case is cracked or worn.

Caution: Any changes or modifications not approved by the
responsible party may void the user’s authority to operate the
equipment.

System Description

The SwipeSense System combines point-of-care hand hygiene with
real-time usage data to improve compliance with infection control
procedures. The system includes:

Badges worn by individual employees
Asset tags attached to tracked assets
Hygiene sensors mounted on hygiene dispensers to track employee
hand sanitation frequency
Entry sensors installed in door thresholds to provide real-time
feedback
Location hubs that monitor employee presence in patient rooms
and asset locations
A communication hub located on each unit that collects and
transmits data to the cloud

Once the data is uploaded to the cloud, it is accessible to all
administrators.

Product Description

The SwipeSense Asset Tag is a small device that should be
attached to any asset that needs to be tracked. It transmits
signals to the Location Hubs, allowing them to establish the
asset’s location. See Figure 1 below for an example of the
SwipeSense Asset Tag attached to a Phillips Intellivue MX40.

SwipeSense Asset Tag attached to a Phillips Intellivue MX40

View Fullscreen

SwipeSense, Inc. 4424 N Ravenswood Ave. Chicago, IL. 60640 (847) 440-6215
Asset Tag User Manual

Asset Tag Model: 221.0

Page 1 of 4 June 2023

SwipeSense, Inc. 4424 N Ravenswood Ave. Chicago, IL. 60640 (847) 440-6215

Safety and Regulatory Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions.
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. Consult the dealer or an experienced radio/ TV technician for help.
This device must not be co-located with other transmitters.

RF Exposure:

This equipment complies with FCC RF Exposure requirements and should be installed and operated with a minimum distance of 20cm between the radiator and any part of the human body.

Warnings

This Device is for indoor use only. This Device is only to be installed by trained SwipeSense personnel. Do not open the Device as there are no user serviceable parts inside
and this product is powered at all times. Do not use if the case is cracked or worn.

Caution

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Asset Tag Model: 221.0

Page 2 of 4 June 2023

SwipeSense, Inc. 4424 N Ravenswood Ave. Chicago, IL. 60640 (847) 440-6215
System Description
The SwipeSense System combines point-of-care hand hygiene with real-time usage data to eliminate dependency on manual observations and increase compliance with infection control procedures.
Our fully integrated system seamlessly provides real-time hand hygiene data from across the enterprise with exceptional clarity. The SwipeSense System creates a “mesh network” that provides flexibility for compiling and communicating hygiene practices of employees within your facility. The mesh network is comprised of:
Badges worn on individual employees Asset tags attached to assets that should be tracked Hygiene sensors mounted to hygiene dispensers tracks employee hand sanitation frequency Entry sensors installed in door thresholds to provide real time feedback Location hubs monitor employee presence in patient rooms and asset locations Communication hub located on each unit collects the data generated within the network and
transmits to the cloud.
Once the data is uploaded to the cloud, it is accessible to all administrators.

Asset Tag Model: 221.0

Page 3 of 4 June 2023

SwipeSense, Inc. 4424 N Ravenswood Ave. Chicago, IL. 60640 (847) 440-6215
Product Description
This is a small device that should be attached to any asset that needs to be tracked. This device transmits signals to the Location Hubs allowing them to establish their location. A picture of the SwipeSense Asset Tag attached to a Phillips Intellivue MX40 as an example is provided in Figure 1.

Figure 1: Asset Tag
Installation Procedure
1. If the Asset Tag is not pre-assigned to a specific asset, assign the Device ID in the App associating the Asset Tag with the asset.
2. Attach the Asset Tag to the asset that needs to be tracked using zip ties, or some other nonpermanent method of attachment.

Asset Tag Model: 221.0

Page 4 of 4 June 2023