Tp-link Deco App Installation Guide

Quick Installation Guide

Getting Started

Please remain online (Wi-Fi or mobile data) for Step 1.

1. Download the TP-Link Deco app for iOS or Android and log in with your TP-Link ID.
   https://www.tp-link.com/app/qrcode/?app=deco
2. Find the Deco labeled “Router.” Follow the app to set it up first for your internet connection.
3. Find the Decos labeled “Satellite.” Follow the app to set them up later for more coverage.

LED Status

Each Deco has an LED light that changes color according to its status. See the explanation below

 Safety Information

• The adapter shall be installed near the equipment and shall be easily accessible.
• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use a damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Use only power supplies which are provided by the manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
  Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
• TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863.

The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/.

For TP-Link Branded Products Only. For more information about the warranty, please visit https://www.tp-link.com/en/support
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).
TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES, AND CONDITIONS.
TP-Link warrants the TP-Link branded hardware product contained in the original packaging against defects in materials and workmanship when used normally according to TP-Link’s guidelines for some period which depends on the local service from the date of original retail purchase by the end-user purchaser.

*The actual frequency bands supported by your product may differ from the bands above.

	AT	BE	BG	CH	CY	CZ	DE	DK
		EL	ES	Fl	FR	HR	HU	IE
	IS	IT	LI	LT	LU	LV	MT	NL
	NO	PL	PT	RO	SE	SI	SK	UK(NI)

UK

Attention: In Great Britain, the operation in the frequency range 5150MHz – 5350MHz is only permitted indoors.

GNU General Public License Notice
This product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”).
As applicable, TP-Link (“TP-Link” in this context referring to the TP-Link entity offering respective software for download or being responsible for the distribution of products that contain respective code) provides, by itself or with the support of third parties (e.g. the TP-Link Corporation Limited), mail service of a machine-readable copy of the corresponding GPL source code on CD-ROM upon request via email or traditional paper mail. TP-Link will charge a nominal cost to cover shipping and media charges as allowed under the GPL. This offer will be valid for at least 3 years.
For GPL inquiries and the GPL CD-ROM information, please contact [email protected] or write to Suite 901, New East Ocean Centre, Tsim
Sha Tsui, Hong Kong. Additionally, TP-Link provides a GPL-Code-Centre under https://www.tp-link.com/en/support/gpl/ where machine-readable copies of the GPL source codes used in TP-Link products are available for free download. Please note, that the GPL-Code-Centre
is only provided as a courtesy to TP-Link’s customers but may neither offer a full set of source codes used in all products nor always provide the latest or actual version of such source codes.
The GPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For further information about the GNU General Public License please refer to the following website: https://static.tp-link.com/resources/document/GPL%20License%20Terms.pdf

References

• Link: Simple, secure one-click payments
• Anatel — Agência Nacional de Telecomunicações
• WiFi Networking Equipment for Home & Business | TP-Link
• Support | TP-Link
• Support | TP-Link
• Support | TP-Link
• CE Regulatory Compliance | TP-Link
• GPL Code Center | TP-Link
• Support | TP-Link
• Support | TP-Link
• Regulatory Compliance | TP-Link
• Support | TP-Link