Veanic 4-Pack Mini Digital Electronic Temperature Humidity Meters Gauge Indoor Thermometer
Specifications
- Product Dimensions: 1.13 x 0.99 x 0.2 inches
- Item Weight: 0.01 ounces
- Batteries: 2 LR44 batteries
- Unit Count: 4 Count
- Power Source: Battery Powered
- Upper Temperature Rating: 158 Degrees Fahrenheit
- Response Time: 10 seconds
- Brand: Veanic
Introduction
Mini Digital Humidity Thermometer allows you to easily know the temperature and humidity around you Its ability to quickly and easily determine the temperature and humidity levels in the environment makes it ideal for use in the office, bedroom, living room, incubators, brooders, cigar rooms, and any other location where temperature and humidity levels must be monitored. Even when two objects are placed side by side, we consider the reading discrepancy between them to be NORMAL if it is less than or equal to +1 F&t1%RH. Compare this to other wall monitors because their sensors may be installed outside or in the ceiling, resulting in abnormally different readings.
What’s In the Box?
- 4 x Digital Thermometer Hygrometer (Battery Included)
- 4 x LR44 Backup Batteries
- User Manual
Does a digital humidity metre work
Humidity sensors detect changes in electrical currents or temperature in the air. Humidity sensors are classified into three types: capacitive, resistive, and thermal. To calculate the humidity in the air, all three types will monitor minute changes in the atmosphere.
Is a sensor used to measure temperature and humidity
A thermo-hygrometer is a device that measures both the temperature and humidity of a location with a single device. They are extremely useful in fields where temperature and humidity are critical, such as breweries and fermentation units, pharmaceutical incubators, plant growth chambers, and so on.
Mini Hygrometer and Thermometer Features
Battery Life is Extensive
This Mini hygrometer thermometer is powered by two LR44 batteries that last 12-18 months. (Four LR44 backup batteries are included.)
Miniature size
Because of its small size, it is ideal for use in incubators, brooders, cigar humidors, reptile tanks, guitar cases, and other places.
Accuracy
The humidity measuring range is 10%-99%RH with a tolerance of 5% RH; the temperature measuring range is -58°F-158°F with a tolerance of 2°F.
Widely Use in Various Environments
The mini hygrometer thermometer is widely used in cigar humidors, reptile tanks, guitar cases, incubators, brooders, offices, green houses, and any other location where temperature and humidity levels must be monitored.
Frequently Asked Questions
Yes. Humidity sensors detect changes in electrical currents or temperature in the air.
You should calibrate your digital humidity meter before using it for the first time. To do so, place the sensor in a glass of water and wait for it to stabilize. Then, adjust the calibration screw on the back of the sensor until you get a reading of 100 percent relative humidity.
You should clean your digital humidity meter with a damp cloth and mild soap if it becomes dirty. Avoid getting water into the sensor itself. If you do get water in it, you should dry it out as quickly as possible and then calibrate it again.
No, you should not use your digital humidity meter outside because it will be exposed to direct sunlight and other environmental conditions that can affect its accuracy.
You should change your batteries at least once every year if you are using them regularly. If they are not being used, you can change them less frequently depending on how often they are used and how long they last before needing to be changed.
They should work fine, assuming no direct exposure to a water dish or source. They are extremely sensitive and extremely small. I’m very happy with the ones I bought last month. When I opened the pack of four, I noticed slight differences in the temperature/humidity readings, but only by a fraction. Nothing that I can think of that would be a problem.
No, I don’t believe so. It has no buttons or switches on it.
No, they are calibrated at the factory. I did not attempt to disassemble one because their performance was adequate for my needs.
I believe this model must be ordered with either a Farenheit or a Celsius display. If it has a switchable display, it may need to be turned on before installing the batteries.
They should be able to handle it. That is why I purchased them initially, but I find them so useful at home and in my office that I need to purchase another set for my guitars, violin, and mandolin. They’ll be used for acoustic instruments. I haven’t discovered any issues with humidity and solid bodies. When the seasons change, most require minor tension bar adjustments.
I haven’t mounted mine yet, but double-sided tape would be my choice. I might even look for picture-hanging or poster-hanging supplies on Amazon. I believe there is a foam tape similar to what I’m describing.
It will obstruct the opening of the battery compartment flap. I have mine standing on various tables and the floor with no problems.
They can, but the humidity gauge is a little shaky.
