Belena M32392 Aquaspa Foot Bath Instruction Manual

belena M32392 AquaSpa Foot Bath

Description

Scope of delivery and description of the parts

• ON/OFF switch
  • On/off switch for spa water + vibration
  • On/off switch for heat/infrared
• Practical water splash guard and transport handle
• Infra-red light
• Massagelvibration nubs
• Foldable silicone wall
• Stable, non-slip rubber feet

IMPORTANT SAFETY INSTRUCTIONS

• Read all instructions carefully, even if you are familiar with the appliance.
• Before cleaning or when not in use, remove the plug from the mains.
• Never pull on the cable. Never carry the appliance by pulling or lifting it by the cable.
• Only ever use the appliance for its intended purpose. This product is intended for domestic use only.
• Never use the appliance outdoors.
• Never attempt to retrieve a appliance that has fallen into water. Unplug the power cord
• Never leave the appliance unattended while it is in operation.
• NEVER operate while bathing or showering.
• Do not use any accessories that are not expressly recommended by the supplier
• Children should not play with the appliance.
• Cleaning and user maintenance must never be performed by children without supervision.
• Never operate the appliance if the power cord or plug is damaged, if it does not work properly, if it has been dropped or damaged, or has fallen into water.
• Return the appliance to a customer service centre for inspection and repair. Always keep the power cord away from hot surfaces.
• Only use the appliance while seated.
• Never use on particularly sensitive areas of skin or upon areas with poor blood circulation.
• Pregnant women and people with diabetes or similar illnesses should consult their doctor before use

IMPORTANT: Your Belena Aqua Spa is foldable – for easy and quick storage

Information about your appliance:

• The spa bath is started together with the vibration (a)
• The heating function + infrared light can – if required – be switched on separately (b)
• The maximum temperature is 42°C.
• The appliance is suitable for feet up to shoe size 46.

INSTRUCTIONS FOR USE:

• Check that the appliance is unplugged before filling it with water.
• Only fill water up to the MAX line – never fill water above the MAX line. Also pay attention to the minimum amount of water that is required – MIN line on the appliance
• Switching on the appliance
• Do this via the switches – see #1A
• On/off switch for spa water + vibration
• On/off switch for heat+infrared
• You can also use the functions separately:
• Bubbles and vibration
• Heat and infra-red
• Heat, infra-red, bubbles and vibration

Note:

• It takes approx. 45 minutes for the water to heat up, depending on the initial water temperature and the filling quantity.
• if you want this to happen faster, fill the basin with warm water.
• Sit on a comfortable chair (e.g. an armchair or sofa), put your feet in the basin and enjoy.
• Before emptying: Disconnect the appliance from the mains.

CLEANING
Unplug the appliance and allow it to cool down before cleaning. Only dry the appliance with a soft, damp cloth. Make sure that no water or other liquids ever come into contact with the switches. After cleaning, wipe the surfaces with a dry cloth. Never use abrasives, detergents or cleaning agents.

STORAGE
Unplug the appliance and allow it to cool down. Put the appliance in its packaging and store in a clean, dry place. Never wrap the cable around the appliance, in order to avoid cable breakage. Never hang the appliance by its power cord.

TROUBLESHOOTING

References

• Group Publishing
• MediaShop - Das Original aus dem TV ✓ online bestellen