4237-333 Bronco LED Dash Kit
Product Information: Product Name: ORACLE LIGHTING BRONCO
LED DASH KIT Product Part Number: 4237-333 Manufacturer: Oracle
Lighting Website: www.oraclelights.com Address:
4401 Division St. Metairie, LA 70002 Technical Support Contact: 1
(800)407-5776 Product Usage Instructions: To install the
ORACLE LIGHTING BRONCO LED DASH KIT, you will need the following
tools: – Trim panel tool – T-30 Torx bit – 7mm nut driver/socket –
Philips screwdriver – Cutting tool Follow these steps to install
the kit: 1. Start by measuring and cutting a 7.5ft section of cable
in half. This step is only done on the bottom cable. 2. Remove any
excess cable and store it in the glove box area. 3. Begin
installing the cable as shown in the picture provided. 4. Continue
installing the cable along the dash, slightly pulling the panel
outward to help with the installation. 5. Refer to the provided
diagram for proper cable routing. For additional technical support,
please contact Oracle Lighting at the provided phone number.
ORACLE LIGHTING
BRONCO LED DASH KIT ORACLE PART #4237-333
INSTALLATIC)N GUIDE
TOOLS NEEDED:
TRIM PANEL TOOL T-3O TORX BIT 7MM NUT DRIVER/SOCKET PHILIPS SCREWDRIVER CUTTING TOOL
PASSENGER SIDE DOOR HANDLE (8) TOTAL MEASURE AND CUT A 7.5FT SECTION OF CABLE
–
–
–
IN HALF (ONLY DONE ON BOTTOM CABLE)
OF EXCESS CABLE IN GLOVE BOX AREA
BEGIN INSTALLING CABLE AS SHOWN IN PIC ABOVE
CONTINUE INSTALLNG CABLE ALONG DASH
(SLIGHTLY PULLING THIS PANEL OUTWARD HELPS)
RAC LE
L–1 CS f—t “‘T'” I …….. CS
I www.oraclelights.com
I © 2022 ORACLE LIGHTING
I 4401 Division St. Metairie, LA 70002
FOR ADDITlmJAL TECHNICAL SUPPORT PLEASE CALL US 1 (800)407-5776
Automotive Lighting Store | ORACLE Lighting
