AIR400-12P Airlite Stream Path Light
Product Information
The Airlite / Airlite Stream Path Light 12v is a product offered
by Lumena Lights Ltd. It is available in different models:
AIR400-12P, AIR600-12P, AIR400-PC-12P, AIR600-PC-12P, AIR400S-12P,
AIR600S-12P, AIR400S-PC-12P, and AIR600S-PC-12P. The product has an
IP65 rating, indicating its resistance to dust and water. It comes
in two different heights: 400mm or 600mm. The light features a
photocell sensor that enables it to automatically turn on at dusk
and off at dawn.
The product is covered by a 3-year guarantee, and additional
details can be found on the manufacturer’s website. Lumena Lights
Ltd is registered as Producer Registration Number WEE/KC3440XY. The
company is located at Centre 33 Long March Daventry Northants NN11
4NR. They can be contacted via phone at +44 1327 871161, fax at
0800 066 4410, or email at [email protected]. For a full range
of products and more information, visit their website at
www.lumenalights.com.
Product Usage Instructions
Installation:
- Seal and screw on the head of the light securely.
- When securing the base, avoid overtightening to prevent
fracture. Do not use high power electric socket tools. - Use the supplied Male 2 Pin Plug & Play Adaptor to connect
the light. - If needed, use the Female 2 Pin Plug & Play Adaptor for
additional connections.
Cleaning:
Occasional cleaning and care is recommended for the product. For
specific instructions on how to clean different materials, please
refer to the manufacturer’s website at www.lumenalights.com.
For a full VERSA Plug & Play range and more information,
please visit their website at www.lumenalights.com.
AIR400-12P / AIR600-12P AIR400-PC-12P / AIR600-PC-12P
AIR400S-12P / AIR600S-12P AIR400S-PC-12P / AIR600S-PC-12P
Airlite / Airlite Stream Path Light 12v
INSTRUCTIONS
WARNINGS
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE COMMENCING ANY WORK
· This is a Class 3 product (Low Voltage) no earth required. · 12V TRANSFORMER MAY BE REQUIRED sold separately · This unit must be fitted by a competent person if in doubt consult a qualified
electrician. · Install in accordance with IEE wiring regulations and current Building Regulations. · To prevent electrocution, switch off mains supply before installing or maintaining this
fitting. Ensure other persons cannot restore the electrical supply without your knowledge. · This light fitting should be connected to a circuit with a 30Ma RCD fitted. · If replacing an existing fitting, make a careful note of the connections. · When changing the bulb, always switch off at the mains & allow the bulb to cool before handling LAMP WILL GET HOT WHEN IN USE. · All connections should be made as watertight as possible to avoid electrical shortage. · Always use the correct type & wattage of bulb. Never exceed the wattage stated. · The unit may get warm whilst on for a period of time. · The head of the product is heavy (up to 3kg) please handle with care
Materials: Anodised Aluminium & Solid Crystal Glass Voltage: 12v Low Voltage Max. Wattage: 35W Lamp Fitting: MR16 Recommended Lamp: LED
IP Rating: IP65 Product Height: 400mm or 600mm Sensor: Photocell (Dusk to Dawn) OPTIONAL
3 YEAR
GUARANTEE
see website for more details
Producer Registration Number: WEE/KC3440XY
RETURNS Please contact us by phone or email
Lumena Lights Ltd Centre 33 Long March Daventry Northants NN11 4NR
Tel: +44 1327 871161 Fax: 0800 066 4410 Email: [email protected]
Full product range & more information: www.lumenalights.com
INSTALLATION:
· A length of 12v 2 core rubber cable is supplied with a VERSA 2 pin male plug (H05RN-F may vary).
· Push the plug firmly into the female adaptor of the Transformer or splitter. · Screw the attached threaded cap to the female adaptor to create a secure
connection. · If a splitter is used, ensure a waterproof cap is used to cover any unused terminals. · Unscrew the head carefully and install MR16 bulb into the bulb holder via the guide
clip (push). · Carefully place the rubber seal between the body and head to ensure a waterproof
seal and screw on head securely.
IMPORTANT: When securing the base, do not overtighten as this could lead to fracture. Do not use high power electric socket tools.
NOTES: · To ease with head / body assembly, a small amount of oil such as `3 in 1′ can be applied to the neck thread. · If the head is accidentally cross-threaded when securing to the body, turn anticlockwise and try again it should then screw on easily. · Product base is fixed to the main part of the light. 4 x Anchor bolts can be used to fix the product to the relevant surface (not supplied). · The rubber seal supplied must be installed between the head and the body and MUST NOT be twisted to ensure a waterproof connection. · Photocell versions photocell is factory pre-set and cannot be changed. · The head of the product is heavy (up to 3kg) handle with care
Male 2 Pin Plug & Play Adaptor (supplied)
Female 2 Pin Plug & Play Adaptor
CLEANING:
Occasional cleaning and care is recommended for this product. Please refer to our website for the best way to clean different materials.
Full VERSA Plug & Play Range & More Information: www.lumenalights.com
Low Voltage Garden Lights, Outdoor Lighting & Solar | Lumena Lights
