CPB36-D CPB 2-Speed Direct Drive Commercial Portable Drum Fan
Product Information
Product: High Velocity Floor Fan
Model: CPB36-D
Important Safety Instructions
- Never insert fingers or any other objects through the grill
guard when the fan is in operation. - Disconnect the fan when moving from one location to
another. - Disconnect the fan when removing guards for cleaning.
- Ensure the fan is placed on a stable, flat surface when in
operation. - Do not use the fan in windows as rain and moisture may create
an electrical hazard. - Close supervision is necessary when using this fan near
children, the elderly, and pets. - Avoid placing the fan near an open flame, cooking or heating
appliance, or hot surface. - This fan should not be operated outside.
- Caution: Do not alter the fan’s assembly.
- Warning: Make sure the front and rear guard screws are
completely screwed down in the locking position before
operation.
Operating Instructions
Speed Control: Rotate the switch from OFF to
LOW and HIGH speeds for respective air velocity. The motor may feel
warm to touch after continuous operation, which is normal. The fan
features a thermostat that will automatically shut off if it
overheats. If this happens, immediately unplug the fan from the
outlet.
Cleaning Instructions
Warning: Unplug the fan from the electrical
supply source before cleaning.
Use a soft damp cloth to clean the fan, then wipe with a dry
cloth. Do not use a cleaning solution that is harmful to paints or
plastics.
Important Notes
Surges in electrical power or excessive heat may cause
the fan to turn off. If this occurs, wait approximately 15
minutes for the fan to resume operation.
Specifications
| Model | Watts (W) | Amps (A) | Volts |
|---|---|---|---|
| CPB36-D | 360 (LOW) / 420 (HIGH) | 2.9 (LOW) / 3.5 (HIGH) | 120V~ 60Hz |
For additional information on TPI Products or replacement parts,
please contact the TPI Customer Service Department at
1-800-251-0382 or write to the address below.
OWNER’S MANUAL
HIGH VELOCITY FLOOR FAN
MODEL: CPB36-D
READ AND SAVE THESE INSTRUCTIONS
CAUTION: Read and follow all instructions before Operating Fan. Do not use fan if any part is damaged or missing. WARNING: To reduce the risk of fire or electrical shock, do not expose to water or rain. To reduce the risk of fire or electrical shock, do not use this fan with any solid state speed control device. Automatically operated device – To reduce the risk of injury disconnect from power supply before servicing. If the supply cord is damaged, it must be replaced by a factory service agent or a similarly qualified person in order to avoid a hazard.
RULES FOR SAFE OPERATION: 1. Never insert fingers or any other objects through the grill guard when fan is in
operation. 2. Disconnect the fan when moving from one location to another. 3. Disconnect the fan when removing guards for cleaning. 4. Be sure fan is on a stable, flat surface when in operation. 5. Do not use fan in windows. Rain and moisture may create electrical hazard. 6. Close supervision is necessary when this fan is used near children, the
elderly and pets. 7. Do not place the fan near an open flame, cooking or heating appliance, or hot
surface. 8. This fan should not be operated outside. Caution: Do not alter the fan’s assembly. Warning: Be sure front and rear guard screws are completely screwed down in locking position before operation.
OPERATING INSTRUCTIONS SPEED CONTROL: Rotate SWITCH from OFF to LOW and HIGH speeds for respective air velocity. It is normal for the motor to feel warm to touch after continuous operation. This fan features a thermostat that will automatically shut off should it overheat for any reason. If this happens, immediately unplug the fan from the outlet.
CLEANING WARNING: Unplug from electrical supply source before cleaning:
Use soft damp cloth to clean, then wipe with dry cloth. Do not use a cleaning solution that is harmful to paints or plastics.
IMPORTANT: SURGES IN ELECTRICAL POWER OR EXCESSIVE HEAT MAY CAUSE THE FAN TO TURN OFF. WAIT APPROXIMATELY 15 MINUTES FOR THE FAN TO RESUME OPERATION.
Model
CPB36-D
WATTS (W)
LOW
HIGH
360
420
AMPS (A)
LOW
HIGH
2.9
3.5
VOLTS 120V~ 60Hz
For additional information on TPI Products or replacement parts, call TPI Customer Service Department at 1-800-251-0382 or write the address below.
