HVD24P Industrial High Velocity Drum Fan
Product Information
The Industrial High Velocity Drum Fan is a powerful fan designed
for indoor use. It is available in three models: HVD24P, HVD30P,
and HVD36P. Manufactured by Sealey, this product is built to a high
standard and is intended to provide years of trouble-free
performance when used according to the provided instructions and
properly maintained.
It is important to read and understand the instructions
carefully to ensure safe operation and to comply with all
operational requirements, warnings, and cautions. Failure to use
the product correctly and with care may result in damage, personal
injury, and will invalidate the warranty. Please keep these
instructions safe for future reference.
Product Usage Instructions
- Safety
- Electrical Safety
- Before use, carefully inspect all electrical components,
including power cables, plugs, sockets, and connectors for wear or
damage. - Ensure that cables are protected against short circuit and
overload. - Regularly inspect power supply cables and plugs for wear or
damage, ensuring all connections are tight. - Confirm that the voltage marked on the appliance matches the
power supply being used and that the plug is fitted with the
correct fuse. - Do not use worn or damaged cables, plugs, or connectors. Have
any faulty items repaired or replaced immediately by a competent
electrician. - If a plug is fitted, follow the provided instructions for
wiring a new plug. - Recommended fuse rating for each model: HVD24P = 5 A, HVD30P
and HVD36P = 13 A.
- Disconnect the fan from the mains power when not in use and
before servicing or performing any maintenance. - Use the fan in dry areas only. Do not use it in wet areas or
areas with high condensation. - If the fan falls into water or other liquid, immediately switch
it off and disconnect it from the mains power supply. Do not touch
the fan until the power supply has been disconnected. - Always disconnect the fan from the power supply when moving it
to a different location and ensure it is placed on a level
surface. - Before use, ensure that there are no objects nearby that may be
damaged or displaced by the powerful air flow of the fan. - Keep the fan clean and well-maintained. For motor service,
contact an authorized service agent.
24″,30″,36″ INDUSTRIAL HIGH VELOCITY DRUM FAN 230V MODEL NO: HVD24P, HVD30P, HVD36P
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to instructions
Indoor use only
1. SAFETY
1.1.
ELECTRICAL SAFETY
WARNING! It is the responsibility of the owner and the operator to read, understand and comply with the following:
You must check all electrical products, before use, to ensure that they are safe. You must inspect power cables, plugs, sockets
and any other connectors for wear or damage. You must ensure that the risk of electric shock is minimised by the installation of
appropriate safety devices. A Residual Current Circuit Breaker (RCCB) should be incorporated in the main distribution board. You
must also read and understand the following instructions concerning electrical safety.
9
Ensure that cables are always protected against short circuit and overload.
9
Regularly inspect power supply cables and plugs for wear or damage and check all connections
to ensure that none are loose.
9
Ensure that the voltage marked on the appliance matches the power supply to be
used and that the plug is fitted with the correct fuse – see fuse rating at right.
8
DO NOT use worn or damaged cables, plugs or connectors. Have any faulty item repaired or
replaced immediately by a competent electrician.
9
It is recommended that this device is wired directly to a fused isolator switch. If, however, a plug
is fitted, the following applies:
9
Fit a new plug according to the following instructions (UK only).
a) Connect the GREEN/YELLOW earth wire to the earth terminal `E’. b) Connect the BROWN live wire to the live terminal `L’.
Recommended fuse rating
c) Connect the BLUE neutral wire to the neutral terminal `N’.
HVD24P = 5 A
d) After wiring, check that there are no bare wires, that all wires have been correctly connected,
HVD30P, HVD36P = 13 A
that the cable restraint is tight.
1.2.
GENERAL SAFETY
9
Disconnect the fan from the mains power when not in use and before servicing or performing any maintenance. Use the fan in dry
areas only. DO NOT use in wet or areas with high condensation such as showers, pools etc.
WARNING! If a fan falls into water or other liquid, immediately switch off and disconnect from the mains power supply. DO NOT
touch the fan until the mains power supply has been disconnected.
9
Always disconnect the fan from the power supply when moving it from one location to another and ensure fan is stood on a level
surface.
9
The fan air flow is powerful. Before use ensure that there is nothing nearby that will be damaged or displaced by the stream of air.
Keep the fan clean and maintained in good condition. For motor service contact an authorised service agent.
9
Use recommended parts only. Unapproved parts may be dangerous, and will invalidate your warranty.
8
DO NOT operate the fan where there are explosive or flammable gases, fumes or other hazardous substances.
8
DO NOT insert any objects through the fan guard.
8
DO NOT cover the fan when in use.
8
DO NOT immerse the fan in water or any other liquid.
8
DO NOT allow children to operate the fan.
NOTE: This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge, unless they have been given supervision or instruction concerning the
use
of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
2. INTRODUCTION
High efficiency industrial fans with improved motor and blade design resulting in higher velocity
with
up to 30% more area coverage and reach. Robust unit with heavy-duty gauge steel casing,
guard and frame. Handle, wheels and tilt function cradle stand, allow the control of airflow
where it is needed. Carefully balanced and fully guarded blades provide safe operation.
Suitable for industrial, commercial, agricultural, automotive and showroom applications.
Fitted with 3-pin plug.
© Jack Sealey Limited
Original Language Version
HVD24P,HVD30P,HVD36P Issue 3 (3,F) 26/04/23
3. SPECIFICATION
MODEL NO Current Efficiency Category Efficiency Grade (N) Fan Diameter Fuse Rating Maximum Airflow Measurement Category Optimum Energy Efficiency Point (rpm) Overall Efficiency Power Supply Cable Length Power Rated Flow Rate (m3/s) Rated Pressure (Pa) Speed Range Speeds Supply
HVD24P 1.43A Static 40.3 Ø610mm(24″) 5A 266m³/min(9,420cfm) A 1399 31.4% 2m 330W 1.116 110 1300-1420rpm 2 230V
HVD30P 1.37A Static 41.22 Ø760mm(30″) 13A 288m³/min(10,175cfm) A 954 32.1% 2m 315W 1.690 70 880-960rpm 2 230V
HVD36P 1.78A Static 40.21 Ø915mm(36″) 13A 363m³/min(12,855cfm) A 940 31.7% 2m 410W 2.242 65 860-950rpm 2 230V
4. OPERATION
WARNING! Ensure that you read, understand and apply safety instructions in Section 1 before using fan.
4.1.
Check that the speed control is set to “0” (OFF) and then plug into the mains power supply and switch the power on.
4.2.
The fans feature 2 speeds which are selectable using the switch located at the back of the fan, above the motor on the HVD24P or
on the fan housing (near the handle) on the HVD30P and HVD36P.
4.3.
Adjust the direction of the air flow by moving from side to side and tilting the fan up or down as required.
4.4.
When you have finished using the fan ensure you turn the speed control switch to “0” (OFF) and disconnect the fan from the mains
power.
5. CARE OF FAN
WARNING! Ensure that the fan is disconnected from the mains power supply before attempting any of the following:
5.1.
Use a soft, damp cloth to clean the fan.
8
DO NOT immerse the fan in water and never allow water to drip onto the motor housing.
8
DO NOT use solvents, petroleum, paint thinner or other chemicals to clean the fan.
5.2.
To clean the fan blade, undo the cross headed screws around the circumference, remove the grille and clean the blade with a
slightly damp cloth. Replace the grille as required and refit the cross headed screws.
5.3.
Should the motor, switch or the power lead require service or maintenance contact your local service agent.
5.4.
When not in use place the fan in it’s original box or otherwise cover to protect from dust, and store in a safe childproof location.
ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
REGISTER YOUR PURCHASE HERE
WEEE REGULATIONS Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
HVD24P,HVD30P,HVD36P Issue 3 (3,F) 26/04/23
Sealey - Leading Professional Tool & Workshop Equipment Supplier
