Sealey Hvd30.v3 Industrial High Velocity Drum Fan Instruction Manual (+ PDF)

Check all electrical equipment and appliances for safety before
use.
Inspect power supply leads, plugs, and electrical connections
for wear and damage.
Sealey recommends using a Residual Current Device (RCD) with
all electrical products.
If using the product for business duties, it must be maintained
in a safe condition and routinely Portable Appliance Test (PAT)
tested.
Ensure the insulation on all cables and the appliance is safe
before connecting it to the power supply.
Regularly inspect power supply cables and plugs for wear or
damage, and ensure all connections are secure.
Do not pull or carry the appliance by the power cable.
Do not pull the plug from the socket by the cable.
Do not use worn or damaged cables, plugs, or connectors. Repair
or replace any faulty items immediately with the help of a
qualified electrician.
If the cable or plug is damaged during use, switch off the
electricity supply and discontinue use. Repairs should be carried
out by a qualified electrician.
Replace a damaged plug with a BS1363/A 3 pin plug. If unsure,
contact a qualified electrician.
Follow the correct wiring instructions:
- Connect the GREEN/YELLOW earth wire to the earth terminal
  `E’.
- Connect the BROWN live wire to the live terminal `L’.
- Connect the BLUE neutral wire to the neutral terminal `N’.
- Ensure the cable outer sheath extends inside the cable
  restraint and that the restraint is tight.
Recommended fuse rating: 5 Amp.
Sealey recommends that repairs should be carried out by a
qualified electrician.

1.2 General Safety

Disconnect the fan from the mains power when not in use and
before servicing or performing any maintenance.
Use the fan in dry areas only. Do not use in wet areas or areas
with high condensation, such as showers or pools.
If the fan falls into water or other liquid, immediately switch
off and disconnect it from the mains power supply. Do not touch the
fan until the mains power supply has been disconnected.

Please read and understand all safety instructions and warnings
provided in the user manual to ensure safe operation of the
product.

View Fullscreen

30″ INDUSTRIAL HIGH VELOCITY DRUM FAN 230V MODEL NO: HVD30.V3
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Refer to instructions

Indoor Use Only

1. SAFETY

1.1.

ELECTRICAL SAFETY

WARNING! It is the user’s responsibility to check the following:

Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and

all electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with all electrical

products. You may obtain an RCD by contacting your local Sealey stockist.

If the product is used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable

Appliance Test) tested.

Electrical safety information, it is important that the following information is read and understood.

Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply.

Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.

Important: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the

correct fuse – see fuse rating in these instructions.

DO NOT pull or carry the appliance by the power cable.

DO NOT pull the plug from the socket by the cable.

DO NOT use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or is

replaced immediately by a qualified electrician.

This product is fitted with a BS1363/A 3 pin plug.

If the cable or plug is damaged during use, switch off the electricity supply and remove from use.

Ensure that repairs are carried out by a qualified electrician.

Replace a damaged plug with a BS1363/A 3 pin plug. If in doubt contact a qualified electrician.

a) Connect the GREEN/YELLOW earth wire to the earth terminal `E’.

b) Connect the BROWN live wire to the live terminal `L’.

c) Connect the BLUE neutral wire to the neutral terminal `N’.

Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight.

Recommended fuse rating

Sealey recommend that repairs are carried out by a qualified electrician.

5 Amp

1.2.

GENERAL SAFETY

Disconnect the fan from the mains power when not in use and before servicing or performing any

maintenance.

Use the fan in dry areas only. DO NOT use in wet or areas with high condensation such as showers, pools etc.

WARNING! If a fan falls into water or other liquid, immediately switch off and disconnect from the mains power supply. DO NOT touch

the fan until the mains power supply has been disconnected.

Always disconnect the fan from the power supply when moving it from one location to another and ensure fan is stood on a level

surface.

The fan air flow is powerful. Before use ensure that there is nothing nearby that will be damaged or displaced by the stream of air.

Keep the fan clean and maintained in good condition. For motor service contact an authorised service agent.

Use recommended parts only. Unapproved parts may be dangerous, and will invalidate your warranty.

DO NOT operate the fan where there are explosive or flammable gases, fumes or other hazardous substances.

DO NOT stand the fan on the power cable.

DO NOT insert any objects through the fan guard.

DO NOT cover the fan when in use.

DO NOT immerse the fan in water or any other liquid.

DO NOT allow children to operate the fan.

DO NOT stand the fan where it may be knocked over or off a surface, or where the lead may cause a person to trip.

DO NOT modify speed control or attempt to fit any additional external speed control device to the fan.

When not in use place the fan in its original box, or cover, to protect from dust and store in a safe, dry, childproof location.

NOTE: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance

in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall

not be made by children without supervision.

Original Language Version

HVD30.V3 Issue 3 (2) 10/10/2022

2. INTRODUCTION

High velocity industrial 2-speed drum fan suitable for movement of huge volumes of air. Robust unit with heavy-duty gauge steel casing, guard and frame. Handle, wheels and tilt function cradle stand allow control of airflow where it is needed. Carefully balanced and fully guarded blades provide safe operation. Fitted with 3-pin plug. Suitable for use in industrial, commercial, agricultural, automotive workshop and showroom applications.

3. SPECIFICATION

Model No:……………………………………………………. HVD30.V3
Current:……………………………………………………………… 0.52 A Fan diameter:…………………………………………. Ø760 mm (30″) Speed range: ……………………………………………..800-900 rpm Speeds:…………………………………………………………………….. 2 Supply:………………………………………………………………..230 V Maximum fan flow rate (F): ………… 283.4 m3/min (10008cfm) Fan power input (P): …………………………………………. 118.6 W Service value (SV): …………………………………..2.4 (m3/min)/W Standby power consumption (PSB): ……………………………..0W Seasonal electricity consumption (Q):…………….. 38.0 kWh/a Fan sound power level (LWA):……………………………… 78 dB(A) Maximum air velocity (c): ……………………………………. 2.2 m/s

4. OPERATION

WARNING! Ensure that you read, understand and apply safety instructions in Section 1 before using fan.

4.1.

Check that the speed control is set to “0” (off) and then plug into the mains power supply and switch the power on.

4.2.

The fans feature 2 speeds which are selectable using the switch located at the back of the fan, above the motor.

4.3.

Adjust the direction of the air flow by moving from side to side and tilting the fan up or down as required.

4.4.

When you have finished using the fan ensure you turn the speed control switch to “0” (off) and disconnect the fan from the mains

power.

5. MAINTENANCE

WARNING! Ensure that the fan is disconnected from the mains power supply before attempting any of the following:

5.1.

Use a soft, damp cloth to clean the fan.

DO NOT immerse the fan in water and never allow water to drip onto the motor housing. DO NOT use solvents, petroleum, paint

thinner or other chemicals to clean the fan.

5.2.

To clean the fan blade, undo the cross headed screws around the circumference, remove the grille and clean the blade with a

slightly damp cloth. Replace the grille as required and refit the cross headed screws.

5.3.

Should the motor, switch or the power lead require service or maintenance contact your local service agent.

5.4.

When not in use place the fan in its original box or otherwise cover to protect from dust, and store in a safe, dry, childproof

location.

ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

WEEE REGULATIONS Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our technical team on [email protected] or 01284 757505. Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500

01284 703534

[email protected]

www.sealey.co.uk

Original Language Version

HVD30.V3 Issue 3 (2) 10/10/2022