RS-403RTCSPB Red Frame Twin Size Car Shaped Platform Bed
Product Information
The WF292413 bunk bed is a sturdy and durable bed made of
high-quality materials. It comes with a front panel, a back panel,
two side rails (left and right), eight slats, four car wheels, four
car rims, and two car lights. The bed is designed to accommodate
two twin mattresses of 8 inches thickness maximum. The upper edge
of the guardrails should be at least 5 inches below the surface of
the mattress to prevent entrapment. The bed should not be used by
children under 6 years of age and water or sleep flotation
mattresses are prohibited. The bunk bed is designed to be assembled
on the shipping carton to protect your floor or carpet.
Product Usage Instructions
- Read all safety warnings and general notes carefully before
assembling the bunk bed. - Use only the recommended size mattress for both upper and lower
bed. - Do not allow children under 6 years of age to use the upper
bunk. - Periodically check and ensure the guardrail, ladder, and other
components are in their proper position, free from damage, and all
connectors are tight. - The bunk bed should be placed against the wall to prevent
entrapment between the bed and the wall. - Never attach or hang items to any part of the bunk bed that are
not designed for use with the bed to avoid strangulation
hazard. - Keep these instructions for future reference.
- Assemble the bunk bed on the shipping carton to protect your
floor or carpet. - Ensure all staples are out of the box before beginning assembly
on the shipping carton. - Use only the mattresses as listed for the upper and lower
beds. - Follow the step-by-step assembly instructions carefully.
- If you have any questions about the product, please contact the
email: Polibi [email protected]
ASSEMBLY INTRUCTIONS
ITEM CODE: WF292413
I f you have any quest i ons about t he pr oduct , pl ease cont act t he emai l : Pol i bi hd@out l ook. com
Page 01 Of 08
SAFETY WARNINGS AND GENERAL NOTES
1. Fllow the infomation on the warnings on the bunk bed end structure and on the carton. Do not remove the warning label from the bed
2. Always use the recommended size mattress on mattress support, or both, to help prevent the likelihood of entrapment on falls
3. Do not allow children under 6 years of age to the upper bunk
4. Periodically check and ensure the guardrail, ladder and other components are in their proper position free from darmage, and all connectorrs are tight
5. Do not allow horseplay on or under beds. 6. Always prohibit jumping on the bed 7. Prohibit more then one person on upper bunk. 8. Always use ladder for entering and leaving the upper bunk. 9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts. 10. Use of a night-light may provide added safely precaution for a child using the upper bunk. 11. Always use guardrails on both long sides of the upper bunk. 12. If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed
should be placed against the wall to prevent entrapment between the bed and the wall. 13. The use of water or sleep flotation mattresses is prohibited 14. STRANGULATION HAZARD-Never attach or hang items to any part of the bunk bed that are
not designed for use with the bed. 15. Keep these instructions for future reference. 16. We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet 17. Be certain all staples are out of the box before beginning assembly on the shipping carton. 18. ONLY USE THE MATTRESSES AS THE LIST BELOW FOR UPPER AND LOWER BEDS
Lower bed Bed type Twin Standard
Length 74″ 75″
Width 38 ½”
Thickness 8” max
19. SURFACE OF MATTRESS MUST BE AT LEAST 5″ (127MM) BELOW THE UPPER EDGE OF GUARDRAILS.
20. Replacement Parts, including additional guardrails, may be obtained from any of our (GIGACLOUD TECHNOLOGY (USA) INC) dealers;
Page 02 Of 08
DETAIL VIEW
D C
D C A2
E B1 E
B2
F C
A1
C
D
D
Page 03 Of 08
BOX: WF292413
A1
A2
B1
Side rail – right (1pc)
B2
Side rail – left (1pc)
C
Front panel (1pc)
D
Back panel (1pc)
E
Car whell (4pcs)
F
Car rims (4pcs)
Car lights (2pcs)
Slats (8pcs)
Page 04 Of 08
HARDWARE LIST: WF292413
1
2
3
4
Hex – Head bolts Ø1/4” * 60 – 12pcs
5
Hex – Head bolts Ø1/4” * 25 – 4pcs
6
Canopy head though Ø1/4” – 4pcs
7
Horizontal – Hold bolts Ø1/4” – 12pcs
8
Wood dowel Ø8 * 30 – 8pcs
Wood crews M4 * 25 – 16pcs
Round head wood screw M4 * 15 – 4pcs
Allen key K4 – 2pcs
Page 05 Of 08
STEP 1
A2
1
4
Hex – Head bolts Ø1/4” * 60 – 12pcs
Horizontal – Hold bolts Ø1/4” – 12pcs
5
B2
Wood dowel Ø8 * 30 – 8pcs
A1 B1
4 1
5 8
Page 06 Of 08
STEP 2
D C
D C
2
3
Hex – Head bolts Ø1/4” * 25 – 4pcs
Canopy head though Ø1/4” – 4pcs
C D
C
D 8
2
3 8
Page 07 Of 08
STEP 3
6 F
6
7
Wood crews M4 * 25 – 16pcs
Round head wood screw M4 * 15 – 4pcs
E E
7 7
COMPLETED
Page 08 Of 08
