1778 Crepes Dame II

Product Information: 1778 Crepes Dame II

This is the user manual for the 1778 Crepes Dame II, a
high-powered crepe maker designed for commercial use. It operates
on a voltage of 400V and has a power rating of 4400W, ensuring
efficient and quick crepe preparation.

Product Usage Instructions

Switch On:

1. Connect the device to a power source with a suitable rating of
   16A and 230V.
2. Switch on the device.
3. Select the desired temperature level using the selector switch.
   It is recommended to preheat the device before use.
4. The device is ready to use when the indicator light turns
   off.

Switch Off:

1. Switch off the appliance after use and allow it to cool
   down.
2. Remove any coarse residues or debris from the crepe maker.
3. Disconnect the device from the power source to ensure
   safety.

Please carefully follow these instructions to ensure safe and
optimal usage of the 1778 Crepes Dame II. For any further
assistance or inquiries, refer to the complete user manual or
contact our customer support.

User manual 1778 Crepes Dame II, 400V/4400W
Safety instructions: · Do not place the device in the immediate vicinity of flammable objects. · Place the device on a flat and horizontal surface. · Never cover the entire device or the ventilation openings during use. · Never leave the powered device turned on unattended. · Make sure that the mains plug and all electrical components (if not designed for this purpose) do not come into contact with water. · Always have electrical installations commissioned by a specialist. · Local regulations and standards must be observed during installation. · Do not use devices with a damaged power cord. · Never disconnect the mains connection by pulling the cable. So always grab the plug to disconnect the mains connection. · Some parts of the device may become hot during use. · Only transport the device when it is switched off.
Switch on: 1. Connect the device to the power source (16A, 230V). 2. Switch on and select the desired temperature level with the selector switch (think about preheating) 3. Device is ready for use when indicator light is off
Switch off: 1. Switch off the appliance and let it cool down 2. Remove coarse residues 3. Disconnect the device from the power source
Berlin | Bocholt | Bremen | Dortmund | Düsseldorf / Köln | Frankfurt | Freiburg | Hamburg | Hannover | Kassel | Leipzig | München Nürnberg | Stuttgart | Wels (A) | Wien | Basel | Arnheim | Nizza | Paris | Luxemburg | Kopenhagen | Oslo | Malmö | Stockholm