Electrolux Lng7te18s 700 Built-in Fridge Installation Guide

Electrolux LNG7TE18S 700 Built-in Fridge

Product Information

This user manual provides installation instructions for Electrolux and AEG fridge/freezer top control sliding doors. The manual contains a diagram with labeled parts and hardware required for installation. The manual also includes safety information and warnings.

Manufacturer Website: www.electrolux.com or www.aeg.com

Product Usage Instructions

1. Before proceeding with installation, read the safety information in the User Manual.
2. Ensure you have all the necessary hardware and tools required for installation.
3. Follow the labeled diagram to identify parts and hardware.
4. Attach part A to the top of the unit using four screws (part G).
5. Attach part B to part A using two screws (part G).
6. Attach part C to parts A and B using two screws (part G).
7. Attach part D to part A using one screw (part G).
8. Attach part E to parts C and D using two screws (part G).
9. Attach part F1 to part E using one screw (part G).
10. Attach part F2 to part E using one screw (part G).
11. Attach part H to parts A and B using four screws (part G).
12. Attach part I to parts A and B using one screw (part G).
13. Attach part L to parts C and D using two screws (part G).
14. Attach the sliding door to the top unit using four screws (part G).
15. Attach part PS to parts C and D using one screw (part G).
16. Attach part 1 to the sliding door using two screws (part G).
17. Insert parts 2 and 3 into part 1.
18. Insert part 4 into part 2.
19. Insert part 5 into part 3.
20. Attach parts F1 and F2 to the sliding door using two screws (part G).
21. Attach part PS to the sliding door using one screw (part G).
22. Attach part E to part I using two screws (part G).
23. Attach parts 1C and 2C to the sliding door using four screws (part G).
24. Attach parts B and B1 to the sliding door using two screws (part G).
25. Attach part PS to the sliding door using one screw (part G).
26. Attach part E to parts B and B1 using four screws (part G).
27. Attach part I to the sliding door using two screws (part G).
28. Attach part H to the sliding door using two screws (part G).

Note: All measurements and hardware requirements are outlined in the labeled diagram.