6853739 Point Reyes Mirror Rectangular
Product Information:
Product Name: Williams Sonoma Home Point Reyes Mirror
Rectangular
Mounting Instructions:
- TOOLS NEEDED (not included):
- Hanging Orientation Options:
- Measure the distance between the center of the Three Hole in
metal cleats. - With the back of the mirror facing away from the wall, hold it
against the wall at a desired mounting location. Mark two reference
points (A, B) on the wall as shown. - Connect the two points (A, B) with a light pencil line. Use a
level to ensure that the line is level. - Make three insertion marks (C, D, E,) centered along the line
using the measurement a. - Use a stud-finder to determine if there is a wall stud[s] located at each insertion mark.
- Install the proper hardware for stud mounting or non-stud
mounting. - Tips: The anchor is self-drillable. No pilot hole
required. - With the help of another person, hang the mirror to the wall so
that the Cleats engage in the Wall.
CARE INSTRUCTIONS:
- To clean the frame of the mirror, wipe with a soft, dry
cloth. - Do not use abrasive or strong chemical household cleaner on the
glass.
Thank you for your purchase!
Stores | Catalog | www.williams-sonomahome.com
Williams Sonoma Home
Point Reyes Mirror Rectangular
Mounting Instructions TOOLS NEEDED (not included):
Hanging Orientation Options:
Mounting Instructions:
1 Measure the distance between the center of the
Three Hole in metal cleats.
2 With the back of the mirror facing [e] away from the
wall, hold it against the wall at a desired mounting location. Mark two reference points (A, B) on the wall as shown.
P: 1 / 3
3 Connect the two points (A, B) with a light pencil line. Use a level to ensure that the line is level. 4 Make three insertion marks (C, D, E,) centered along the line using the measurement “a”.
5 Use a stud-finder to determine if there is a wall stud[s] located at [each] either insertion mark.
Install the proper hardware, as shown below.
For stud mounting:
For non-stud mounting:
Tips: The anchor is self-drillable. No pilot hole required.
P: 2 / 3
6
With the help of another person, hang the mirror to the wall so that the Cleats engage in the Wall.
CARE INSTRUCTIONS: – To clean the frame of the mirror, wipe with a soft, dry cloth. Do not use abrasive or strong chemical household
cleaners. – A household glass cleaner may be used for the mirror surface spray the cleaner on a clean cloth first and then use
the cloth to clean the glass. Thank you for your purchase!
Stores | Catalog | www.williams-sonomahome.com
P: 3 / 3
