Specialized 98922-5800 Passenger Handlebar Installation Guide

• Your Globe 0-10 Nm torque wrench
• F 4 mm hex bit – Use on the M5 x 14 mm bolt.
• G 3 mm hex bit – Use on the M6 T-nut fixing screws.

1. Insert and rotate two T-nuts (B) into each side of the rack
   rail.
2. Optional: Install T-nut fixing screws (C) to keep T-nuts from
   sliding during assembly or to keep them in the correct location
   after removing the accessory. Note that these screws do not add
   strength.
3. Align the T-nuts with the holes on the passenger handlebar
   base.
4. With all 4 T-nuts in position, place the passenger handlebar on
   top of the rack and insert the 14 mm bolts (D) with washers (E)
   through the passenger handlebar holes and into the T-nuts (B). Keep
   all bolts loose so the bar can slide forward and backward to the
   desired location.
5. Once the ideal location of the passenger handlebar is found,
   use the small torque wrench and 4 mm hex bit to torque the bolts to
   6.2 Nm / 55 in-lbf.

• The Globe passenger handlebar is not designed to be used as a
  backrest.
• It is intended for use on Globe bicycles only.
• When using the handlebar with the passenger seat pad, position
  the seat pad first and then position the handlebar as close to the
  front of the seat pad as possible.
• Regularly ensure that the passenger handlebar bolts are
  tightened to specification.
• Familiarize yourself with and comply with all applicable laws
  and safety requirements of your riding area.
• Always wear a cycling helmet that meets the latest
  certification standards and is appropriate for the type of riding
  you do.

For more information, please visit www.globebikes.com.

What’s included A
What’s required

# INCLUDED ITEMS

QTY DESCRIPTION

Assembly Instructions

BC

A Passenger handlebar

1

C

B T-nuts

4

B

Prevents the T-nut from sliding

C M6 T-nut fixing screws

4

during assembly or keeps the T-nuts in the correct location

1

after removing your accessory.

D Mounting bolts M5 x 14 mm

4

3

E M5 washer

4

# REQUIRED ITEMS

QTY DESCRIPTION

E

Your Globe 0-10 Nm torque wrench

Use the torque wrench supplied 1 with your Globe bicycle to tighten
the bolts to specification.

2

DE

A

F 4 mm hex bit

1 Use on the M5 x 14 mm bolt.

G 3 mm hex bit

1 Use on the M6 T-nut fixing screws.

D

E

The Globe passenger handlebar is intended to provide a

4

grip for your passenger when riding on your Globe bicycle.

The use of proper seating, footrests, and wheel covers is

E

required at all times. Visit www.globebikes.com for more

information.

WARNING! The Globe passenger handlebar should be used

only with the appropriate passenger seat, footrests, and

G

F

wheel covers. Failure to follow this warning may result in serious personal injury or even death to the passenger and/

5

or rider.

The passenger handlebar is mounted to the rear rack on your Globe bicycle.
The following instructions guide you through assembling the passenger handlebar safely to your bicycle. z 1: Insert and rotate two T-nuts (B) into each side of the rack rail. z 2: The optional T-nut fixing screws (C) may be installed to keep
T-nuts from sliding during assembly or keep the T-nuts in the correct location after removing your accessory.
The fixing screws are intended to make removing and reinstalling the bar faster and easier and do not add strength.
z 3: Align the T-nuts with the holes on the passenger handlebar base.
z 4: With all 4 T-nuts in position, place the passenger handlebar on the top of the rack and insert the 14 mm bolts (D) with washers (E) through the passenger handlebar holes and into the T-nuts (B). Keep all bolts loose so the bar can slide forward and backward to the desired location.
z 5: Once the ideal location of the passenger handlebar is found, use the small torque wrench and 4 mm hex bit to torque the bolts to 6.2 Nm / 55 in-lbf.
The rack is symmetrically designed with no front or back and can be installed in either direction.

Safety Information
WARNING: The Globe passenger handlebar provides a stable place for passengers to hold and is not intended or designed to be used as a backrest.
WARNING! The Globe passenger handlebar is intended for use on Globe bicycles only.
When using the passenger handlebar with the passenger seat pad, position the seat pad first, then position the passenger handlebar as close to the front of the seat pad as possible.
WARNING! Before your first ride and regularly thereafter, ensure the passenger handlebar bolts are tightened to specification.
WARNING: The area where you ride may require specific safety devices. It is your responsibility to familiarize yourself with the laws of the area where you ride and to comply with all applicable laws, including properly equipping yourself, your passengers, and your bicycle as the law requires.
WARNING: You and your passenger must always wear a cycling helmet that meets the latest certification standards and is appropriate for the type of riding you do. Most serious bicycle injuries involve head injuries that might have been avoided if the rider had worn an appropriate helmet.
WARNING! Riding with passenger on your bicycle affects the handling by altering the center of gravity, weight, and balance. It may also negatively impact your cornering ability, increase your necessary stopping distance, and reduce your ability to slow down and maneuver, especially at higher speeds or down a steep grade. All of this can result in a loss of control, potentially causing serious injury and/or death. You should also become familiar with and practice riding with the passenger in a controlled environment away from traffic.

Online Video Guides
An informative and important video explaining how to properly assemble the Globe passenger handlebar is available by scanning the QR code. This assembly/ setup guide is intended to be used together with the video.

Torque specifications

COMPONENTS Mounting bolts M5 x 14 mm

TOOL 4 mm hex bit

TORQUE

Nm in-lbf

6.2

55

Maximum Weight Limits
MODEL HAUL ST HAUL LT

CARGO REAR
(lb / kg) 88 / 40
132 / 60

SPECIALIZED BICYCLE COMPONENTS 15130 Concord Circle, Morgan Hill, CA 95037 (408) 779-6229 0000189518_AG_R1 05/22 We may occasionally issue updates and addendums to this document. Please periodically check www.globebikes.com or contact Rider Care to make sure you have the latest information. Info: 877-808-8154

Globe Passenger Handlebar
Assembly Guide

References

• Globe Haul ST | Specialized.com