TT4W2 WIFI Dongle
Product Information
- Product Name: WIFI Dongle
- Input: 3.3V 0.5A
- Frequency Range: 2.4GHz-2.483GHz
- Operating Temperature: -40~105
Warning: Changes or modifications to this unit
not expressly approved by the part responsible for compliance could
void the user’s authority to operate the equipment.
WEEE (Waste Electrical and Electronic Equipment)
Directive: This information only applies to customers in
the European Union, according to Directive 2012/19/EU OF THE
EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 04 July 2012 on waste
electrical and legal systems, and to customers in countries in
Europe, Middle East and Africa (EMEA) where they have implemented
equivalent regulations. For other countries, please contact your
local government to investigate the possibility of recycling your
product.
RF Exposure Statement: This equipment complies
with the FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and
any part of your body. This equipment meets the exemption from the
routine evaluation limits in section 2.5 of RSS-102. It should be
installed and operated with a minimum distance of 20cm between the
radiator and any part of your body.
FCC Warning: This device complies with Part 15
of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation. NOTE 1: This
equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to. NOTE 2: Any changes or modifications to
this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment.
IC Warning: This device contains license-exempt
transmitter(s) that comply with Innovation, Science and Economic
Development Canada’s license-exempt RSS(s). Operation is subject to
the following two conditions: (1) This device may not cause
interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the
device.
FCC ID: 2AUTE-TT4W2
IC: 26218-TT4W2
Manufacturer: Xiamen Hanin Electronic Technology
Co., Ltd.
Made in: China
Product Usage Instructions
Installation: Open the machine shell and locate
the motherboard wireless module socket.
WI-FI Settings:
- Printer Wi-fi factory default is Off, and it
needs to be turned on through men before use. - In AP mode, the IP address is 192.168.1.1,
SSID is TT4W Ap-xxxx (last four digits of Wi-fi Mac address). - If you need to change the Wi-fi settings, please set it by the
Utility tool.
USER MANUAL
Product specifications
Product Name: WIFI Dongle Input: 3.3V 0.5A Frequency Range :2.4GHz-2.483GHz Operating Temperature :-40~105 Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
WEEE(Waste Electrical and Electronic Equipment) Directive This information only applies to customers in the European Union,according to Directive 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 04 July 2012 on waste electrical and legal systems,and to customers in countries in Europe,Middle East and Africa(EMEA) where they have implemented equivalent regulations . For other countries,please contact your local government to investigate the possibility of recycling your product.
RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
Cet équipement est conforme à l’exemption des limites d’évaluation habituelle de la section 2.5 de la norme RSS-102. Il doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et toute partie de votre corps.
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC WARNING
This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
FCC ID:2AUTE-TT4W2 IC:26218-TT4W2
Manufacturer:Xiamen Hanin Electronic Technology Co., Ltd. Made in China
Installation Open the machine shell and locate the motherboard wireless module socket
WI-FI SettingsPrinter Wi-fi factory default is Off , and it needs to be turned on through menbefore use . In AP mode , the IP address is 192.168.1.1 , SSID is TT4W Ap-xxxx( last four digits of Wi-fi Mac address ) . If you need to change the Wi-fi settings ,please set it by the Utility tool
