Photo Frames

PHOTO FRAMES

User Manual

FATMUG

Contents :

1. Precautions
2. Visualizing the arrangement.
3. Reviewing and cleaning the wall surface.
4. Sticking the Frames with Foam Tape
5. Hanging the frames with nail.

Precautions

1. Handle the frames gently when unpacking/hanging/cleaning.
2. While handling, be careful not to drop the frames.
3. Avoid placing them near the edge of tables/beds to save them
   from falling off.
4. Make sure to keep the frames with glass (Acrylic) side facing
   up, whenever laying them on a surface.
5. Avoid stacking the frames on top of each other after
   unpacking.
6. Avoid drilling or nailing anywhere around electrical
   outlets.
7. Use a soft, dry or very lightly moist, microfiber cloth to
   gently dust and clean the frames and front acrylic glass
   occasionally. Avoid using rough fabrics or even paper towels for
   cleaning.
8. Avoid placing them on damp walls, near fireplaces or appliances
   like coolers.
9. Avoid hanging frames on problematic wall surfaces, e.g. cracks
   in walls, loose plaster, mold on walls or stained walls.

Visualizing your Arrangement

1. The most essential step in hanging wall art is deciding on the
   arrangement and a suitable place for hanging the pieces.
2. Using a rough estimate of the Wall Area to hang the pieces, lay
   the frames out on the floor. Move the pieces around until you have
   an arrangement that you like. It is recommended that the center of
   your arrangement lies at approximately 51 from the floor.

Reviewing the Surface of the Wall

1. Review the surface of the chosen wall to finalize the hanging
   process.

Rough Surfaces

If the wall surface is rough, hanging the poster using a hammer
and a nail is recommended.

Smooth Surfaces

If the wall surface is smooth, hanging the poster using the foam
tape is recommended.

Cleaning the surface

1. Avoid hanging frames on problematic wall surfaces, e.g. cracks
   in walls, loose plaster, mold on walls or stained walls.
2. Use a soft cloth to clean the wall surface and the frame before
   hanging them.

Pick a reference corner point for one of the poster (preferably
the one at the bottom right) and mark it on the wall

Sticking the Artwork with Foam Tape

1. The Double Sided Foam Tape is highly adhesive. If the wall
   surface that you have chosen is smooth, we recommend using this
   method.
2. Cut 4 pieces of Foam tape of length 2 inches each, for each
   frame / decal.
3. After hanging the first poster, repeat the process to complete
   the decided layout.

Hanging the Frames with Nail

1. After finalizing the first point, carefully hammer a nail into
   the wall.
2. Start only after deciding the arrangement. Mark a point on the
   wall roughly estimating the midpoint of the width of the
   poster.
3. Hang the first frame on the nail and use the hanging jig to
   align it.

Wall Side: The Side that abuts the wall

Nail Side: From where the hook is hammered

PHOTO FRAMES

User Manual
FATMUG

Contents :

1 Precautions

2 Visualizing the arrangement.
3 Reviewing and cleaning the wall surface.

4

Sticking the Frames with Foam Tape

5 Hanging the frames with nail.

1 2 3 4 – 5 6

Precautions
1 Handle the frames gently when unpaking/hanging/cleaning 2 While handling, Be careful not to drop the frames 3 Avoid placing them near the edge of tables/beds to save
them from falling off 4 Make sure to keep the frames with glass (Acrylic) side
facing up, whenever laying them on a surface 5 Avoid stacking the frames on top of each other after
unpacking 6 Avoid drilling or nailing anywhere around electrical outlets 7 Use a soft, dry or very lightly moist, microfiber cloth to gently dust
and clean the frames and front acrylic glass occasionally. Avoid using rough fabrics or even paper towels for cleaning. 8 Avoid placing them on damp walls, near fireplaces or appliances like coolers 9 Avoid hanging frames on problematic wall surfaces, e.g. cracks in walls, loose plaster, mold on walls or stained walls
1

Visualizing your Arrangement
1 The most essential step in hanging wall art is deciding on the arrangement and a suitable place for hanging the pieces.
2 Using a rough estimate of the Wall Area to hang the pieces, lay the frames out on the floor. Move the pieces around until you have an arrangement that you like. It is recommended that the center of your arrangement lies at approximately 51″ from the floor
2

Reviewing the Surface of the Wall
1 Review the surface of the chosen wall to finalize the hanging process.

Rough Surfaces
If the wall surface is rough, hanging the poster using a hammer and a nail is recommended

Smooth Surfaces
If the wall surface is smooth, hanging the poster using the foam tape is recommended.

Cleaning the surface
1 Avoid hanging frames on problematic wall surfaces, e.g. cracks in walls, loose plaster, mold on walls or stained walls.
2 Use a soft cloth to clean the wall surface and the frame before hanging them.

3

3 Pick a reference corner point for one of the poster (preferably the one at the bottom right) and mark it on the wall
Sticking the Artwork with Foam Tape
1 The Double Sided Foam Tape is highly adhesive. If the wall surface that you have chosen is smooth we recommend using this method
2″
2″
x 4
2 Cut 4 Peices of Foam tape of length 2 inches each, for each frame / decal 4

4 After hanging the first poster, repeat the process to complete the decided layout.
5

Hanging the Frames with Nail

2 After finalizing the first point, carefully hammer a nail into the wall.

1 Start only after deciding the arrangement. Mark a point on the wall roughly estimating the midpoint of the width of the poster.
3 Hang the first frame on the nail and use the hanging jig to align it.

Wall Side The Side that abuts the wall
Nail Side From where the hook is hammered
6